Constant BSOD's and Windows Update Issue

TheFallen · 27 Aug 2016

I keep getting BSOD's, I'm not sure why I'm getting these BSODs, I recently just reinstalled my copy of Windows 7 like 3-4 weeks ago. I also cannot update using windows update, I'm not sure why that is either. Every time I try to download the update via the updater it always fails.

My computer BSOD's sometimes right after restarting. I recently just bought a new 5Tb external but I have checked to make sure that the drive is working as it should via the Seagate dashboard, It has a drive checker and the results say that its functioning properly.

I checked one of the more frequent BSOD codes c2, It said that my ram was faulty according to what the BSOD report was. So I looked for a memory checker and found the Windows 7 memory checker and did that test but it came up clean. So now I'm not sure whats happening.

I get other BSOD codes also, its listed in my attachment.

The Update errors I get are Windows Update_800B0100 and Windows Update_8007065E

Attachment 391027

HonorGamer · 27 Aug 2016

Your zip file came up emtpy. Please re run the tool again.

TheFallen · 27 Aug 2016

My mistake I didn't realize that the zip had nothing in it.

Here is the correct one.
Attachment 391029

HonorGamer · 27 Aug 2016

Try updating your BIOS, https://ami.com/products/bios-uefi-firmware/

If that does not work, try checking your memory: RAM - Test with Memtest86+

Make sure you do atleast 8 passes. Once it is finished post up a picture of the results.

torchwood · 28 Aug 2016

Hi TheFallen,

Have you allowed the KMS server in KIS, and that your company has validated your licence, updates are failing because of lack of Permissions.

As you have a 5T external i believe you have to use GPT, are you.

Roy

TheFallen · 30 Aug 2016

HonorGamer said:

Try updating your BIOS, https://ami.com/products/bios-uefi-firmware/

If that does not work, try checking your memory: RAM - Test with Memtest86+

Make sure you do atleast 8 passes. Once it is finished post up a picture of the results.

I finished the test but I don't know where to find the results from the test, It from what I can tell had no errors but something weird did happen.

At the 9th pass its like the program froze but the numbers were still going but there was no progress on the bar that indicated its current progress.

The test ran for about 6 and a half hours and only got to test #9. I don't know if this is normal but I will say that I only have 8Gb of ram.

torchwood said:

Hi TheFallen,

Have you allowed the KMS server in KIS, and that your company has validated your licence, updates are failing because of lack of Permissions.

As you have a 5T external i believe you have to use GPT, are you.

Roy

I'm sorry I don't know what KMS or KIS is, As for my Windows 7 Key, I have one but I don't have the key on hand. I am currently waiting for an email to get the key. But I have activated this windows 7 with the key that I have before.

The external that I have is a Seagate 5Tb Desktop Expansion drive, As far as I know its "plug and play", I also don't know what GPT is, Sorry for my question but what is GPT?