Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD error 0x3B (0xC0000005, 0xFFFFF88011162AB1...)

20 Jan 2017   #141
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hmm well seems like HW Info must have got it wrong - very unusual and I am not sure why. It could be down to other software interference but what I can't say - maybe the AV??

Now of course the only real option is to test the PSU with a digital multimeter that can only be the absolute definitive way of checking those rails. If you can and have a meter it means checking the volts on the 24 pin connector and the volts and colours for the different cables can be seen in this Power supply unit (computer - Wikipedia) if you scroll right down the page you come to a pic of the 24 pin connector with colours. Now those colours are the same for all the other connectors to components ie the GPU etc .

What you can do is to reseat the cables to anything that looks like it is supplying power to other stuff and I don't know without going all the way back through this thread if someone has asked if you have cleaned out the machine and it might be an idea to check the caps for any signs of them going bad. It only takes one cap to go out to cause all sorts of problems if not total shutdown. Pics to show what they might look like. Plus check for any signs of scorching on the board itself if there is any there is often a distinct acrid resinous smell about it,




Attached Thumbnails
BSOD error 0x3B (0xC0000005, 0xFFFFF88011162AB1...)-cap-3.png  
Attached Images
BSOD error 0x3B (0xC0000005, 0xFFFFF88011162AB1...)-cap-1.png BSOD error 0x3B (0xC0000005, 0xFFFFF88011162AB1...)-cap-2.png 
My System SpecsSystem Spec
.
26 Jan 2017   #142
Hylander650

Windows 7 Home Premium 64bit
 
 

Since I just bought a brand new PSU do I still need to test its volts/rails still? When I installed the new PSU I used all the new cables that came with it and checked all the places where they connect, they all look fine. I checked all the caps and none of them looked like the bad ones shown in your pictures.

I try to keep my computer clean, use a couple cans of air every few months to keep all the dust out.

Now when I checked for the bad caps, the only thing I found that looked out of place/bad was this line of smaller-looking caps in the corner, I have included a picture of what I am talking about, they look bent out of place or something.


Attached Thumbnails
BSOD error 0x3B (0xC0000005, 0xFFFFF88011162AB1...)-20170126_134442.jpeg  
My System SpecsSystem Spec
26 Jan 2017   #143
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Well you can check the new PSU if you feel like it (only takes a couple of minutes as you know) but I should think it is fine.

Now those caps yes they can look "bent" over and that could be just the way they were installed. What you need to do is to get a close a look at them as you can what you are looking for is any signs of ooze usually a white to pale yellow gunk from around the top or the base where they are attached to the board.

Another thing you can do is to make sure you ground yourself first or better still use a wrist grounding strap and feel the tops of those caps for any signs of bulging upwards and in some cases you might feel if there is any sort of ooze from them.

I have attached couple of pics of bad caps.


Attached Thumbnails
BSOD error 0x3B (0xC0000005, 0xFFFFF88011162AB1...)-cap-4.png   BSOD error 0x3B (0xC0000005, 0xFFFFF88011162AB1...)-cap-5.png  
My System SpecsSystem Spec
.

Reply

 BSOD error 0x3B (0xC0000005, 0xFFFFF88011162AB1...)




Thread Tools




Similar help and support threads
Thread Forum
BSOD error 0x3B
Hi, Having lots of issues with BSOD errors. Have tried a number of fixes but can't find anything that works. I'm hoping that the very nice people here might be able to help. I'm also pretty PC illiterate so please don't hold that against me. I've posted what info I have but let me know...
BSOD Help and Support
BSOD G73JH ntoskrnl.exe (nt+0x75BC0) BCC: 0x3B (0xC0000005,
Started getting random BSOD Any suggestions would be appreciated! Regards
BSOD Help and Support
BSOD error 0x3b
I have been getting BSOD 0x3b's nearly everyday for the past few days. I downloaded a hotfix from Microsoft that seems to have have stopped the win32k.sys+c47b3 driver error. The 0x3b I just had shows mrxsmb20.sys as the driver error.
BSOD Help and Support
HD Tune Pro Causes BSOD 0x3B (0xC0000005, 0xFFFFF80003102BF4, 0xFFFFF8
When runnning HD Tune Pro, a BSOD pops up creating a dump which "whocrashed" analyzed as : I recently re-installed windows on my system, and it worked fine before. Now it causes blue screen of death. System Spec :
BSOD Help and Support
BSOD when starting certain programs, error 0x0000008E (0xC0000005, 0x8
Can anyone tell anything from the dump files? Problem appeared out of the blue, system had been working fine.
BSOD Help and Support
BSOD : 0x7e with error code 0xC0000005
Hi, Attaching here BSOD crash dump file, BTW i am using Windows XP embedded OS, If this is not the right place to ask help for XP embedded then please suggest.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:59.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App