Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD BAD_POOL_CALLER on Restart and strange CPU TMPIN3 readings.

03 Dec 2016   #1
Gnomifer

Windows 7 x64
 
 
BSOD BAD_POOL_CALLER on Restart and strange CPU TMPIN3 readings.

So this is just 1 event in a very long string of them. I decided to downgrade windows 10 to windows 7 yesterday as i didnt like the performance i was getting in games such as seemingly random FPS drops out of nowhere for no reason in CSGO and EVE despite there being no background processes, with updated clean installed drivers, ect. After i installed windows 7 without issue i noticed when i checked bios and hardware monitor that my CPU temp was sitting at 100 degrees Celsius and my TMPIN3 was 100 degrees Celsius. It would start at around 80 degrees and just climb till it maxed out at 100, but i figured it would have shut down if the temp was really that high or i would feel heat accumulating in the case but i did not. I used an infrared laser thermometer and periodically shined it on my Water cooler and various areas of the mobo like the bridge to test if there were heat issues or fluctuations, all read normal around the 30 degrees celsius mark. Im also 100 percent sure that its not the heatsink or paste or anything of that nature as it only started this after win 7 install, my case is also dust free. So i did some research and heard some people say reflash the bios they could be corrupted, so i got the latest bios and drivers from MSI suite and installed all of them to no avail. I then started to install windows updates and noticed i was getting this BAD_POOL_CALLER issue as the updates were finished and it was trying to boot into the desktop. It has done this a few different times now, mem test and disk test both found no issues. I have to say at this point im at a complete loss. All i could think of was to come upload my dump file that i set up to be created after this became a frequent thing. Also a thing to note, i tried to go back to windows 10 to see if it was something with win 7 and it wont get through the installation, said it couldnt copy files or something like that after the 2nd boot process around 80 percent in the installation.




Attached Files
File Type: zip 120316-36317-01.zip (42.5 KB, 0 views)
My System SpecsSystem Spec
.
Reply

 BSOD BAD_POOL_CALLER on Restart and strange CPU TMPIN3 readings.




Thread Tools




Similar help and support threads
Thread Forum
Strange fan readings and no control?
Ever since I purchased the H80i, I have had no control over what the fan speeds are, Corsair Link hasn't worked no matter how many "fixes" I do, and turning any "auto" fan control off in the bios hasn't done a thing either. In the bios, it sees my CPU fan speed as 2400rpm, constantly, no matter...
Hardware & Devices
Ai suite 11 readings
I'm getting "abnormal" readings and would like to know how to correct this problem. Thanks, Paul I also just did an update to the latest BIOS.
Hardware & Devices
Strange Issue with AMD Catalyst 12.8 under Windows 7 x64 upon restart
Essentially this issue only shows up after the system is shut down or after a restart. The issue is that after a reboot/restart - Aero is disabled and can't be fixed (via windows aero trouble-shooter - coming back with a message that my card may support Aero but the driver installed doesn't) -...
Graphic Cards
Can anyone assist with my memory and CPU-Z readings
Hi all, Im currently running CPU-z, speedfan and core temp. Ive added a screenie of CPU-z. http://i141.photobucket.com/albums/r52/carryonminiin/customBUILDER/cpu-z.jpg Am i getting this wrong or is there a problem. BIOS says that it is set to run at 1333mhz at 9-9-9-24 @ 1.500v not...
PC Custom Builds and Overclocking
CPUZ processor readings
Ok here goes a really dumb noob question... I have just changed my power management settings from balanced to high performance. Previously in CPUZ my processor (i5 750) would read 1.2GHz with the multiplier x9 (cos speed stepping was on) and only when stressed go up to the 3.2GHz max as the...
Hardware & Devices
Strange Restart or start or...,I don't what!!!
Hi every one When I open a folder which contains some "video files" including types of 3GP,WMv,etc,windows crashes and this message appears: windows explorer has stopped working and then: windows is restarting then,like loging off,system starts again,but there is only one differnce and that is...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:47.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App