Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Unresolved BSOD crash - error 9F

06 Jan 2017   #11
Layback Bear

Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64

Without the information I requested posted in the fashion the tutorial instructs, I'm unable to help any farther.


My System SpecsSystem Spec
06 Jan 2017   #12
Al Lewis

Windows 7 x64

Five screenshots duly attached as separate JPEG files.
My System SpecsSystem Spec
07 Jan 2017   #13
Al Lewis

Windows 7 x64

Greetings Jack,
Do you have what you need now?
My best,
My System SpecsSystem Spec

07 Jan 2017   #14
Layback Bear

Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64

Yes that helps. Good job.

In my opinion you have way to many things that start with a boot.
They are all running in the background eating up your system resources. Any one of them can be causing problems.

One I notice first off was AVG Tuneup program.
Their is no such thing as a good Tuneup program for Windows 7. They all cause more problems than they worth.

Compare your pictures to my picture. Big difference.

I'm no BSOD expert but I think the information you added will help find your problem.

I will see if I can find one of our BSOD experts to continue with you and your problem.

They are always very busy so just hang in there.

My System SpecsSystem Spec
07 Jan 2017   #15
Al Lewis

Windows 7 x64

Thanks Jack. We're moving forward now.

I did notice the big difference in what was running in the background on your system and mine. Another clue is that when I shut down Windows I get a series of notifications telling me that the system is waiting for a background program to close, one notification after the other with a pause between them, even though I have closed all the programs that were open. Eventually the system shuts down, sometimes with a BSOD, sometimes not.

Also. the system response time is noticeably slower than when I first set it up the PC a month ago.

These seem to be clues that all point in the same direction.

For now I'll follow your suggestion and disable AVG Tuneup. I'll wait for advice from one of your BSOD specialists before taking any further action. I'll take my place in line while hoping that my number comes up soon.
My System SpecsSystem Spec
08 Jan 2017   #16

Windows 10 Pro

It is recommended to remove AVG PC Tuneup and the AVG toolbar.

All dumps point to the Intel LAN driver, check Dell for driver updates.
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

A driver has failed to complete a power IRP within a specific time.
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8004dff060, Physical Device Object of the stack
Arg3: fffff800050cf3d8, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: fffff98076b92d80, The blocked IRP

0: kd> !devstack fffffa8004dff060
  !DevObj           !DrvObj            !DevExt           ObjectName
  fffffa800e108c30  \DRIVER\VERIFIER_FILTERfffffa800e108d80  InfoMask field not found for _OBJECT_HEADER at fffffa800e108c00

  fffffa800e107050 *** WARNING: Unable to verify timestamp for e1d62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1d62x64.sys
 \Driver\e1dexpress fffffa800e1071a0  InfoMask field not found for _OBJECT_HEADER at fffffa800e107020

  fffffa800dfac0e0  \DRIVER\VERIFIER_FILTERfffffa800dfac230  InfoMask field not found for _OBJECT_HEADER at fffffa800dfac0b0

  fffffa80051a1480  \Driver\ACPI       fffff980017a2d50  InfoMask field not found for _OBJECT_HEADER at fffffa80051a1450

> fffffa8004dff060  \Driver\pci        fffffa8004dff1b0  Cannot read info offset from nt!ObpInfoMaskToOffset

!DevNode fffffa80051a4890 :
  DeviceInst is "PCI\VEN_8086&DEV_15B8&SUBSYS_06BA1028&REV_31\3&11583659&0&FE"
  ServiceName is "e1dexpress"

0: kd> !irp fffff98076b92d80 3
Irp is active with 6 stacks 4 is current (= 0xfffff98076b92f28)
 No Mdl: No System Buffer: Thread 00000000:  Irp stack trace.  
Flags = 40000000
ThreadListEntry.Flink = fffff98076b92da0
ThreadListEntry.Blink = fffff98076b92da0
IoStatus.Status = c00000bb
IoStatus.Information = 00000000
RequestorMode = 00000000
Cancel = 00
CancelIrql = 0
ApcEnvironment = 00
UserIosb = 00000000
UserEvent = 00000000
Overlay.AsynchronousParameters.UserApcRoutine = 00000000
Overlay.AsynchronousParameters.UserApcContext = 00000000
Overlay.AllocationSize = 00000000 - 00000000
CancelRoutine = 00000000   
UserBuffer = 00000000
&Tail.Overlay.DeviceQueueEntry = fffff98076b92df8
Tail.Overlay.Thread = 00000000
Tail.Overlay.AuxiliaryBuffer = 00000000
Tail.Overlay.ListEntry.Flink = fffff98091032e28
Tail.Overlay.ListEntry.Blink = fffff80003477bc0
Tail.Overlay.CurrentStackLocation = fffff98076b92f28
Tail.Overlay.OriginalFileObject = 00000000
Tail.Apc = 00000000
Tail.CompletionKey = 00000000
     cmd  flg cl Device   File     Completion-Context
 [N/A(0), N/A(0)]
            0  0 00000000 00000000 00000000-00000000    

			Args: 00000000 00000000 00000000 00000000
 [N/A(0), N/A(0)]
            0  0 00000000 00000000 00000000-00000000    

			Args: 00000000 00000000 00000000 00000000
 [N/A(0), N/A(0)]
            0 10 00000000 00000000 00000000-00000000    

			Args: 00000000 00000000 00000000 00000000
            0 e0 fffffa800e107050 00000000 fffff80003758eb0-fffff98076b92f70 Success Error Cancel 
	       \Driver\e1dexpress	nt!IovpInternalCompletionTrap
			Args: 00015400 00000000 00000005 00000003
            0 e1 fffffa800e108c30 00000000 fffff80003514210-fffffa800dda29a0 Success Error Cancel pending
	       \DRIVER\VERIFIER_FILTER	nt!PopSystemIrpCompletion
			Args: 00015400 00000000 00000005 00000003
 [N/A(0), N/A(0)]
            0  0 00000000 00000000 00000000-fffffa800dda29a0    

			Args: 00000000 00000000 00000000 00000000

0: kd> !devobj fffffa800e107050
Device object (fffffa800e107050) is for:
 InfoMask field not found for _OBJECT_HEADER at fffffa800e107020
 \Driver\e1dexpress DriverObject fffffa800dfac7a0
Current Irp 00000000 RefCount 0 Type 00000017 Flags 00002050
SecurityDescriptor fffff8a000087140 DevExt fffffa800e1071a0 DevObjExt fffffa800e1088c0 
ExtensionFlags (0xe0000800)  DOE_DEFAULT_SD_PRESENT, DOE_RAW_FDO, 
                             DOE_BOTTOM_OF_FDO_STACK, DOE_DESIGNATED_FDO
Characteristics (0x00000100)  FILE_DEVICE_SECURE_OPEN
AttachedDevice (Upper) fffffa800e108c30 \DRIVER\VERIFIER_FILTER
AttachedTo (Lower) fffffa800dfac0e0 \DRIVER\VERIFIER_FILTER
Device queue is not busy.

0: kd> !DevNode fffffa80051a4890
DevNode 0xfffffa80051a4890 for PDO 0xfffffa8004dff060
  Parent 0xfffffa8004076640   Sibling 0xfffffa80051a4610   Child 0000000000   
  InstancePath is "PCI\VEN_8086&DEV_15B8&SUBSYS_06BA1028&REV_31\3&11583659&0&FE"
  ServiceName is "e1dexpress"
  State = DeviceNodeStarted (0x308)
  Previous State = DeviceNodeEnumerateCompletion (0x30d)
  StateHistory[09] = DeviceNodeEnumerateCompletion (0x30d)
  StateHistory[08] = DeviceNodeEnumeratePending (0x30c)
  StateHistory[07] = DeviceNodeStarted (0x308)
  StateHistory[06] = DeviceNodeStartPostWork (0x307)
  StateHistory[05] = DeviceNodeStartCompletion (0x306)
  StateHistory[04] = DeviceNodeStartPending (0x305)
  StateHistory[03] = DeviceNodeResourcesAssigned (0x304)
  StateHistory[02] = DeviceNodeDriversAdded (0x303)
  StateHistory[01] = DeviceNodeInitialized (0x302)
  StateHistory[00] = DeviceNodeUninitialized (0x301)
  StateHistory[19] = Unknown State (0x0)
  StateHistory[18] = Unknown State (0x0)
  StateHistory[17] = Unknown State (0x0)
  StateHistory[16] = Unknown State (0x0)
  StateHistory[15] = Unknown State (0x0)
  StateHistory[14] = Unknown State (0x0)
  StateHistory[13] = Unknown State (0x0)
  StateHistory[12] = Unknown State (0x0)
  StateHistory[11] = Unknown State (0x0)
  StateHistory[10] = Unknown State (0x0)
  Flags (0x6c0000f0)  DNF_ENUMERATED, DNF_IDS_QUERIED, 
  CapabilityFlags (0x00002000)  WakeFromD3

0: kd> lmvm e1d62x64
Browse full module list
start             end                 module name
fffff880`05541000 fffff880`055bf000   e1d62x64 T (no symbols)           
    Loaded symbol image file: e1d62x64.sys
    Image path: \SystemRoot\system32\DRIVERS\e1d62x64.sys
    Image name: e1d62x64.sys
    Browse all global symbols  functions  data
    Timestamp:        Thu Jun 18 18:49:38 2015 (5582F6A2)
    CheckSum:         0007B97E
    ImageSize:        0007E000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My System SpecsSystem Spec
08 Jan 2017   #17
Al Lewis

Windows 7 x64

Thank you. I'll do that and report back on the result.
My System SpecsSystem Spec
08 Jan 2017   #18
Layback Bear

Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64

Thank you axe0 for coming to the aid of Al Lewis.

axe0 is one of our BSOD experts. Please follow his instructions.

Hopefully AVG Tuneup hasn't already caused damage.

I will sit back and watch.

My System SpecsSystem Spec
08 Jan 2017   #19
Al Lewis

Windows 7 x64


Thank you very much.

1. I have disabled the AVG Tuneup process
2. I have updated the "Intel Ethernet Connection I219-V" driver -- I PRESUME THAT THAT IS THE DRIVER THAT YOU SUGGESTED WAS AT FAULT - Yes??
3. The Dell online support utility tells me that all my drivers are up to date.

Question: I don't see "AVG toolbar" in the list of startup/running processes. Is it there?


If you have time, would you care to suggest some startup or running processes that I can safely kill?

Thanks to both of you, I'll report back when I know whether or not the BSOD has been banished.

My System SpecsSystem Spec
08 Jan 2017   #20
Layback Bear

Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64

I can give you some guide lines of how I keep my systems.

Do not that when you uncheck things in msconfig/Startup you can still use them by just ticking on them or their icon. They just don't run in the background when they are not being used.


1. No auto update anything. I do all my updates of everything manually. I check often everything to see if they need up dates. This way I get the updates I want and when I want them. This way if a problem arises I know exactly what I have done and check quickly fix things.

2. Start with just your active security programs checked. Examples in my case it is Malwarebytes Premium and Microsoft Security Essentials.

Then check and see how things work.

*** Please note:***

axe0 requested that you remove AVG Tuneup. He did not ask you to disable it.
Have you already used AVG to tune up your system?

I would suggest that you read axe0 post again and follow his suggestions and directions.

My System SpecsSystem Spec

 Unresolved BSOD crash - error 9F

Thread Tools

Similar help and support threads
Thread Forum
BSOD and windows crash Error: 0x000000F4 no crash files.
Hello everyone I have been trying to fix my PC for the last two weeks. I've tried everything. Windows clean install a bunch of test on my hard drive. I've checked S.M.A.R.T done an 9 hour memtest and I;ve finally given up. I honestly don't know what to do this is a fairly new build done in June. I...
BSOD Help and Support
win10/win7 start, orb freezes, bsod flickers, unresolved error
hi folks here is the deal win 10 freshly installed on ssd, doing my bit in reorganizing some files, malwarebyte antimalware doing a scan in the background when all of a sudden a colored screen pops up informing me of updates coming in with the little wheely thing. then the pc restarts but...
General Discussion
Okay to upgrade to 10 with unresolved problems in 7?
Multiple questions here, but the thread title has a character limit. I've been unsuccessfully struggling to fix a problem I've been having with "Failure configuring Windows updates. Reverting changes." (Fifteen minutes to boot up, grr!) Now that the Windows 10 upgrade is available, I'm hoping...
Installation & Setup
BSOD - Still Unresolved Probably Because of Old Drivers
I apologize for starting a new thread but I am not getting any responses in my old thread describes the problem and the steps that I have taken. I have new information, and am attaching new files to this thread. Old thread is here: ...
BSOD Help and Support
Random BSOD, new system build, unresolved for weeks
Hi, I have been trying to solve a BSOD issue i have been having now for weeks. I installed a fresh copy of windows 7 64bit on my new rig, and all drivers are installed. I then installed my wifi dongle and then antivirus and a few others like VLC media player etc... I did all windows updates...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:59.
Twitter Facebook Google+