Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD IRQL_NOT_LESS_OR_EQUAL 0x000000a

13 Feb 2017   #1

Windows 7 Home Premium 64-Bit

It always involved driver ntoskrnl.exe
Hey guys my computer just keeps randomly BSOD'ing 95% of the time it gives me the message in the title, but a couple times I have gotten Page_Fault_In_Nonpaged_area. I have uploaded the necessary files, thank you in advance!

Windows 7 Home Premium 64 Bit
Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz
BIOS Date: 03/21/14 09:37:11 Ver: 14.02
16.00 GB 15.94 GB G. Skill Ripjaw
(1) ST2000DX001-1CM164 ATA Device (2) ST32000542AS ATA Device (3) Seagate Expansion Desk SCSI Disk Device (4) Seagate FreeAgent GoFlex SCSI Disk Device
(1) NVIDIA Virtual Audio Device (Wave Extensible) (WDM) (2) NVIDIA High Definition Audio (3) Sound Blaster Z

My System SpecsSystem Spec
17 Feb 2017   #2

Windows 10 Pro

Please run the DM Log Collector again and upload a new zip, the current uploaded one misses several logs.
You could check if there are
  1. 18 .txt,
  2. 1 .nfo,
  3. 1 or more .dmp,
files present, if this is the case then all logs are present :)
If there are a few missing, no problem as we can get them manually if required :)
My System SpecsSystem Spec
18 Feb 2017   #3

Windows 7 Home Premium 64-Bit

Ok new one has been uploaded, thank you so much man. I appreciate it.
My System SpecsSystem Spec

18 Feb 2017   #4

Windows 10 Pro


Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums

Note   Note

MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it.

If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.
My System SpecsSystem Spec
18 Feb 2017   #5

Windows 7 Home Premium 64-Bit

I did that before and it didn't find any errors. I will do it again though. Should I do anything special with the memtest, like set any options?
My System SpecsSystem Spec


Thread Tools

Similar help and support threads
Thread Forum
BSOD - 0x000000a when installing driver help to identify cause
Hey Everyone, So I had an original problem of my computer being extremely laggy and getting a BSODs often so used verifier and it came back iastor.sys looked it up and the 2nd post off link below below dramatically improved my system ...
BSOD Help and Support
BSOD while using Google Chrome, error 0x000000A
Hi, Would appreciate your help on this. I am running Windows 7 Home Premium 64bit on a Dell XPS 1640 (3.5 years old). Started having BSOD randomly a week ago while using Chrome or working. I have run the SF Diagnostic tool, files as attached. Looking forward to your advice! Thank you.
BSOD Help and Support
BSOD every 1-3 hours, STOP 0x000000a
Hey guys, this is my first post, and I can't find anyone else to help me. I'm getting a BSOD on my new computer, and I need to know if a part is damaged and if I have to replace it. I've included everything in the folder like they asked. The code is STOP 0x000000a and not really much else to say....
BSOD Help and Support
Hello Everyone!, Unfortunately I now am running into a BSOD 0x000000a IRQL_NOT_LESS_OR_EQUAL error. I have included the JCGriff file, Perfmon, and zipped up Minidump files (2 of them to be exact). I am unsure as to what the problem of this one is. I ran MemTest86+ for over 15 Hours and 9 passes...
BSOD Help and Support
getting this one mostly alongside D1. after few minutes or few hours from turn on, very randmoly. the rig is AMD VENICE +3200, 2GB (4X512) twinmos memories ATI HD4530 card (new and the BS was before it was installed) and a generic HEC 400W PSU. here is a screenshot i've taken from...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:19.
Twitter Facebook Google+