Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD, Code: 0x124 (0x0, 0xFFFFFA800D9BE8F8, 0x0, 0x0)

20 Mar 2017   #1
Crimsonmoon

Windows 7 Ultimate x64
 
 
BSOD, Code: 0x124 (0x0, 0xFFFFFA800D9BE8F8, 0x0, 0x0)

Hello

I was watching some videos on YouTube last week sometime when the computer just shut down and reset itself, I then put the computer in safe mode (what im doing now) and used the program WhoCrashed and it told me this information.

(Note this is the test done for today as the others are not showing.)

Crash Dump Analysis

crash dump file: C:\Windows\Minidump\032017-32697-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x4ADB3C)
Bugcheck code: 0x124 (0x0, 0xFFFFFA800D9BE8F8, 0x0, 0x0)
Error: WHEA_UNCORRECTABLE_ERROR
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

Can someone help me as I have no clue whats going on.

Thanks.


My System SpecsSystem Spec
.
20 Mar 2017   #2
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hello and welcome Crimsonmoon now mate first up please follow this
Now before we can help we do need to know what is in your machine so please do this System Info - See Your System Specs
or either enter the specs of your system in your forum profile the specs will appear when we click on that little box bottom left of the post screen it is for me the preferable option as it is easy. As you may appreciate it is very hard when you don’t know what one is working with for example a diesel or petrol engine.
*(pretyped to save time)

Then if possible please follow these

Dump Files - Configure Windows to Create on BSOD
&
Blue Screen of Death (BSOD) Posting Instructions

Until we get the full dump files it is near impossible to advise what to do, but I can say it is almost certainly a hardware problem. Just how old is this machine??

Edit: Now in safe mode can you please run these
SFC /SCANNOW Command - System File Checker
Disk Check < if necessary include the /f switch and if this does not make any improvement then just run this switch instead /r in the command line as per Option2
Run these in safe mode and the sfc often best run for two to three runs – you can leave out the /r switch in ckdsk if you feel it not necessary
My System SpecsSystem Spec
21 Mar 2017   #3
Crimsonmoon

Windows 7 Ultimate x64
 
 

Hello

I updated the spcs and then tryed to add the info you asked for on here but it jusy gave me a 404 error and won't let me attach the files.
My System SpecsSystem Spec
.

21 Mar 2017   #4
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok mate nicely done with the specs and that 404 is just a network failure to hook up to wherever you have linked for want of a better term. Now I often get this from time to time and the fix is to just try again / reboot your modem / reboot the machine I usually try hat in that order.

But in any case that bugcheck 124 you mentioned in post #1 is almost certainly be down to a hardware problem as it mentions there and the ntoskrnl.exe bugcheck is very common and means just about nothing to us in pointing out what the issue is.

We shall need to go through the hardware bit by bit to find the components/s that are bad in some way. This is usually started out by testing stuff like the RAM and CPU etc but please try getting those dumps through to us because they may narrow the search down for us.

Now as you also mention a thermal isue can you please run this Speccy - Free Download - Piriform and post back either a screen shot or just type the temps for the CPU and GPU and the board will be shown too but the CPU and GPU are the important ones.
Having said that have you ever overclocked that machine?? and added new hardware recently??

Now for screen shots you could use this
Screenshots and Files - Upload and Post in Seven Forums and if you go to Heres How you will find how to use the snipping tool - something I use all the time and very handy to keep on the taskbar.

Anyway those dumps mate.
My System SpecsSystem Spec
21 Mar 2017   #5
Crimsonmoon

Windows 7 Ultimate x64
 
 

Hello
I tried to log into the computer a few minutes ago to run in safe mode and it will not go in safe mode, it tells me its loading the files and just stops
My System SpecsSystem Spec
21 Mar 2017   #6
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok mate now get into the BIOS and see what the temps are in there. The fact it will not boot into safemode may be due to the CPU overheating.

Let us know what the temps are.
My System SpecsSystem Spec
21 Mar 2017   #7
Crimsonmoon

Windows 7 Ultimate x64
 
 

Hello
How do I find the temp in the BIOS?

Thanks
My System SpecsSystem Spec
22 Mar 2017   #8
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok shut down the computer (normally) and then power up and while doing so tap the DEL button repeatedly (for Gigabyte boards) a useful link for you in the future maybe BIOS Keys by Motherboard (Gigabyte, MSI, ASUS, Etc.)

Now when open you need to get to the correct section of the BIOS and if you have the older legacy type that will be quite easy see pic for an example of what I think your BIOS probably is as from your specs I cannot tell because it only says Gigabyte board - no model.

It might be useful for you to read this How to Monitor CPU Temperature: 11 Steps (with Pictures) - wikiHow

Edit: To get out of each section hit ESC


Attached Thumbnails
BSOD, Code: 0x124 (0x0, 0xFFFFFA800D9BE8F8, 0x0, 0x0)-bios-1.png  
My System SpecsSystem Spec
22 Mar 2017   #9
Crimsonmoon

Windows 7 Ultimate x64
 
 

In the pc health status there is cpu/system temperature

While in there I can see a few things Current system temp at 30 and current cpu temp at 40 started at 28, current cpu fan speed 2848 rpm and current system fan speed at 0 rpm.
My System SpecsSystem Spec
22 Mar 2017   #10
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok mate now while the temps are ok I think maybe 40C is a tad more than I would like as you are only running the BIOS it is a smidgen over the 50% of the max for that CPU - 70.5C and I would expect that if you had a few tabs open or watching YouTube for example.

Problem here is now it will not boot into safe mode even so we might need to try some other options.

Now while I know on shouldn't do this normally I would try just shutting down the machine and see if you get the message Window was not shut down properly etc etc it should have a black screen with options on it and I would choose the repair your computer one see this for what you might see (hopefully)
Advanced Boot Options

Post back what happens.
My System SpecsSystem Spec
Reply

 BSOD, Code: 0x124 (0x0, 0xFFFFFA800D9BE8F8, 0x0, 0x0)




Thread Tools




Similar help and support threads
Thread Forum
BSOD bugcheck code: 0x124
Hello guys, So I've been getting this BSOD for a while now. I've researched, ran every type of program to test my hardware out, and at the end they all seem to say that everything is fine. I had a stock heat sink for the CPU and I changed it to a water cooled one. The BSOD usually happen at...
BSOD Help and Support
Random BSOD, Error code 0x124
Hi! fist of all, sorry for my bad english. I've been getting BSOD for a like a month now, i had my laptop stored for a year because the power jack and poder cord of my laptop where broken. A month ago i asked a friend to help me soldering both. Since then, ive been getting bsod when i open...
BSOD Help and Support
BSOD Battlefield 3 (and others!) Bugcheck code: 0x124
Hey Guys, I'm running on a custom built system (specs in my profile I think) and it's been going fine for several years with only the odd BSOD that driver updates seem to fix. I've been getting more and more frequent crashes and it seems to happen most when I'm playing Battlefield 3 but can...
BSOD Help and Support
BSOD hal.dll Bugcheck code: 0x124
Hello. I apologize for my bad English. I need help with my OS. BSOD is usually going while watching on-line video. I've some problems with downloading Windows_NT6_BSOD_jcgriff2. Here is dump files and config.
BSOD Help and Support
BSOD - Bugcheck code: 0x124 (0x0, 0xFFFFFA800BAF6038, 0x0, 0x0)
Hello all, I have been experiencing a few BSODs the past few days. My computer will boot up fine after the BSOD, but they seem to be happening more often. I am running a custom built i7-920 machine with 12GB Tripple Channel DDR3 RAM, and an NVIDIA GTX470 Graphics card. I think 0x124 is...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 21:34.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App