Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSoD. Do not know. 0x50 page fault in nonpaged area.

25 Mar 2017   #1
User Name

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
BSoD. Do not know. 0x50 page fault in nonpaged area.

Can not boot. Known good configuration goes to same BSoD.
What do the following parameters mean?

0xfffffa80196de000, 0x0, 0xfffff80002edf2a8, 0x0.


My System SpecsSystem Spec
.
25 Mar 2017   #2
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hello and welcome User Name mate can you boot into safe mode?? if so please run these for starters
SFC /SCANNOW Command - System File Checker
Disk Check < if necessary include the /f switch and if this does not make any improvement then just run this switch instead /r in the command line as per Option2
Run these in safe mode and the sfc often best run for two to three runs Ė you can leave out the /r switch in ckdsk if you feel it not necessary

Now I have to say what you have posted is almost impossible to know the cause of so if it does happen to boot normally please follow these
Dump Files - Configure Windows to Create on BSOD
&
Blue Screen of Death (BSOD) Posting Instructions
My System SpecsSystem Spec
28 Mar 2017   #3
User Name

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

SFC /SCANNOW Command - System File Checker and Disk Check did not find any violations or errors.
The minidump folder was empty despite already being setup. Except the default operating system drop down was blank with no selections available.
I have attached the contents of the DM Log Collector.


Attached Files
File Type: txt all_services_status[1].txt (57.2 KB, 4 views)
File Type: txt autorun[1].txt (878 Bytes, 3 views)
File Type: txt driver_status[1].txt (84.1 KB, 3 views)
File Type: txt drivers[1].txt (60.8 KB, 2 views)
File Type: txt dxdiag[1].txt (19.9 KB, 4 views)
My System SpecsSystem Spec
.

29 Mar 2017   #4
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok mate now can you follow this please as we need to know just what you have in the machine.
Now before we can help we do need to know what is in your machine so please do this System Info - See Your System Specs - Windows 7 Help Forums
or either enter the specs of your system in your forum profile the specs will appear when we click on that little box bottom left of the post screen it is for me the preferable option as it is easy. As you may appreciate it is very hard when you donít know what one is working with for example a diesel or petrol engine.
*(pretyped to save time)

The other thing I want to know is do you have iTunes installed?? because it often downloads a service/software called "Bonjour" and in the past it has been known to caused issues in Windows and I found this in one of your logs


SERVICE_NAME: Bonjour Service
DISPLAY_NAME: Bonjour Service
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 1084 (0x43c)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

The other thing I found is that the Windows Audio service has stopped
------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: This computer cannot play audio because the Windows Audio service is not enabled. Use the Sounds and Devices Properties control panel to enable audio. No sound card was found. If one is expected, you should install a sound driver provided by the hardware manufacturer.
Input Tab: No problems found.

This may mean nothing so is your or has your machine been without sound for any time? I ask in case you have a sound card installed.
My System SpecsSystem Spec
29 Mar 2017   #5
User Name

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I updated my system information following the link you provided.
I do not have ITunes and the Bonjour program was preloaded on the computer and never used.
The only time I have had any problems with my sound was when I tried the windows 10 free upgrade and that was resolved by reverting back to 7. No problems before or since. My guess is the current lack of audio is related to being in safe mode.
My System SpecsSystem Spec
31 Mar 2017   #6
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok mate now you have what looks to be three drives installed - can you disconnect everything (hard drives of whatever sort) can you also disconnect for the net (turn off your modem) and disable the Webrooot AV too before you do the above.

Then power on while tapping the F8 button.

Now if that HP came prebuilt then the iTunes and Bonjour may have been bundled with the OS unless you have got rid ot id since getting the machine.

The other little problem is that you installed 10 then reverted back to 7 and just how did you do that because there has been quite a number of members who have done this and ended up with issues notwithstanding the recent problems with 10 updates.

If the machine has some age on it then this would be a good time to check for a dirty interior. By the by just what exact model is the machine the designation and model number on the stickers. It would also be worth knowing if this machine was new or refurbished when you got it.

If the worst comes to the worst and you need to clean install is there a Microsoft sticker on the machine with an activation code?? DO NOT send any pics of it unless you obliterate some of the coding alpha/numerical.
Providing you have that you can install from an official ISO and I have two methods of retrieving data before you do that even thought the machine will not boot.

Anyway I shall await your reply.
My System SpecsSystem Spec
Reply

 BSoD. Do not know. 0x50 page fault in nonpaged area.




Thread Tools




Similar help and support threads
Thread Forum
BSOD Page Fault in Nonpaged Area
Hi All, I have today found BSOD Page Fault in Nonpaged Area. Laptop working ok in safe mode with networking. I've attached the dump file as directed. When I try perfmon /report it states "an error occured while attempting to generate the report." Spec: Win 7 Home Premium x64, pre...
BSOD Help and Support
Regular BSOD - 0x50 - Page fault in nonpaged area
Hi guys I've had a lot of problems with BSODs on my new computer. I don't know if a record of events is important for the diagnosis, but I'll go ahead and write it out, and if it's not, feel free to just skip to the attached file. I recently got a few pieces of new hardware - MB, CPU, GPU,...
BSOD Help and Support
BSOD - Page Fault In Nonpaged Area
Hi all, I've recently run into the dreaded BSOD - Page Fault in Non-Paged Area screen. Initially, it started randomly while I was copying some files over but now has escalated into always occurring every time when I start up. Basically, windows will start up and get past the welcome screen so...
BSOD Help and Support
BSOD - Page Fault in Nonpaged Area?
My comp recently BSOD Computer Spec: Intel C2D E7500 2.9GHz (OC'ed to 3.6Ghz) Kingston 2 x 2GB DDR2 RAM Asus P5Q SE2 Inno3D Gtx 560 Ti Windows 7 Ultimate x64
BSOD Help and Support
BSOD in BF3/WoW/Google Chrome, Page Fault in Nonpaged Area 0x50
Hi I have Win 7 x64 Home Premium, recently I have been encountering BSOD's again after reinstalling Win 7 3 months ago and reseating my ram to fix them. Recently I have had 2 BSOD's one when I booted up WoW after playing BF3 and one about an hour ago in BF3, I appreciate any help you guys can offer!
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 21:38.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App