Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Trying to analyze sudden PC boots - 04/07/2017

07 Apr 2017   #1
rbassman98003

 
 
Trying to analyze sudden PC boots - 04/07/2017

Trying to analyze sudden PC boots


My System SpecsSystem Spec
.
08 Apr 2017   #2
axe0

Windows 10 Pro
 
 

Please uninstall Norton and install Microsoft Security Essentials as a temporary replacement.


Please uninstall everything of AMD using Display Driver Uninstaller and install new drivers from AMD. Be sure to install as less as possible software using custom/advanced options, you can use this tutorial to do so AMD Graphics Drivers - Install Without Catalyst Install Manager - Windows 7 Help Forums

Code:
0: kd> lmvm atikmdag
Browse full module list
start             end                 module name
fffff880`056b9000 fffff880`060d4000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: atikmdag.sys
    Image name: atikmdag.sys
    Browse all global symbols  functions  data
    Timestamp:        Wed May 23 03:45:20 2012 (4FBC4130)
    CheckSum:         009D3822
    ImageSize:        00A1B000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4




Trying to analyze sudden PC boots - 04/07/2017 Diagnostics Test Trying to analyze sudden PC boots - 04/07/2017
 HDD TEST

Note   Note
Please run HDTune first, in the order posted!

Run HDTune to
  • check the health,
  • scan for errors, no quick scan but full scan
  • run a benchmark.
It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following
  • the health,
  • the error scan,
  • the benchmark incl. following
    • transfer rate,
    • access time,
    • burst rate,
    • cpu usage.

Run SeaTools DOS to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run the long test.
Note   Note
Do not run SeaTools on an SSD as the results will be invalid.

Make a photo of the result and post it.

Run chkdsk
Disk Check - Windows 7 Help Forums
Use option TWO with parameter /r
Upload the chkdsk log Check Disk (chkdsk) - Read Event Viewer Log - Windows 7 Help Forums






Trying to analyze sudden PC boots - 04/07/2017 Diagnostic Test Trying to analyze sudden PC boots - 04/07/2017
 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums

Note   Note


MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


Make a photo of the result and post it.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.



Please fill in your system specs
Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
The PSU, cooling and other stuff are NOT mentioned in the tool.

In the left corner below in your post you find 'My System Specs'. After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.


My System SpecsSystem Spec
Reply

 Trying to analyze sudden PC boots - 04/07/2017




Thread Tools




Similar help and support threads
Thread Forum
analyze -v
hi could someone tell me what is analyze -v and how do i perform this task ? ive been asked to do it in the bsod thread. ty
General Discussion
Could Someone Analyze My .dmp?
So I got a BSOD and I'm not really knowledgeable enough to interpret the contents of a .dmp; could someone take a look and let me know what happened? Thanks! I suspect that it was some Canon printer drivers that I downloaded/installed shortly before the crash occurred but I want to be sure.
BSOD Help and Support
Sudden Death, computer no longer boots
Death of a laptop Related posts Computer turned off suddenly, now doesn't turn on Computer freezes on startup before beeper posts The information in the related posts listed above give much more detail and provide more options than what I'm posting here. This is a general post based on...
Hardware & Devices
Please analyze this
Could you geeks tell me why my favorite laptop crashed. Minidump attached. Thanks in advance. Kari
BSOD Help and Support
Please analyze this BSOD for me
my GX740 notebook crashed again, 2 times today... please tell me whats the cause. i attached 2 dump files. I had no crashes for 3 or 4 days. today it started to crash again. I cant tell i made driver or other big changes to my notebook. i dont think so...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:04.
Twitter Facebook Google+