Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 0x00000101 and 0x00000124 a couple mins after logging in

10 May 2017   #1
jlambert

Windows 7 proffesional x64
 
 
BSOD 0x00000101 and 0x00000124 a couple mins after logging in

I have a new build that I built about 2 months ago. after a month I started getting these BSOD. I have ran prime 95 with no problems in safe mode. I have reinstalled windows multiple times. I can't even get drivers to update before I get bsod's. I sent in my motherboard and they said it was fine but did reflash it and update it. I want to think it is a USB problem because sometimes my keyboard will work but my mouse will not and they are using the same wireless usb. I have dump files that I can post but its just in the .dmp format as I can't even download the program like in the instructions. Any help would be aprreciated.


My System SpecsSystem Spec
.
15 May 2017   #2
YoYo155

Windows 10
 
 

Hi there welcome.
A question though, why is it you can't follow the BSOD posting instructions exactly?

We can't help you with little to no data I'm afraid.
With that said, 0x101 and 0x124 are 99.5% of the time hardware fault related, now you've
said that your USB ports are occasionally unresponsive, I would assume that you it means that your
motherboard is on its last legs.

0x101, unfortunately this bug check code doesn't contain enough
information in the minidump file be analyzed fully.

Please upload the Kernel dump file using Dropbox or Skydrive, the file is located in the Windows directory
and is usually a few hundred Megabytes in size.
Code:
C:\Windows\MEMORY.dmp
---------

Follow the steps detailed below with extra caution since I have no data to work with.

Quote:
A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. - H2SO4
The generic nature of the 0x124 (Arg1=0) stop code means we would have to take
the trail & error approach.

Do you have any spare parts (or another PC) to test with?
The usual suspect of this kind of BCCode is the CPU but it's often not the the case which is why we need
to test other components to rule them out as the cause.
How old are your components?


What is the make, model and age of your PSU?
Fill out this form and post back the result:
Good practice, open up the case and re-seat all types of connection.
  • SATA Cables (HDD/SSD/ODD).
  • SATA-Power.
  • Motherboard 24-pin.
  • Motherboard 4/8-pin (CPU).
  • Re-seat the RAM.
  • Re-seat the GPU.
Make sure that every slot / cable head is free of dust or other obstruction.
Make sure that every connection is seating properly and firmly in-place.

Also have a look at the motherboard and the GPU, search for any "bad caps", bulky, leaking bloated capacitors.

i.e




Test for thermals and stability:
  • Download HWinfo and post a Screenshot of the sensors window, one at idle and another while putting load on the PC using Prime95 for the CPU side and Furmark for the GPU.
    • Before running Prime95 make sure to enable Round-off checking (see 1st post under the tutorial).
    Note   Note
    It is not mandatory to run both tests simultaneously, although possible as long as the temperatures are under constant monitoring.
Reset the BIOS back to default:
Note   Note
Write down the current value of the SATA Mode!
Its either AHCI or IDE.
After resetting the CMOS go back and verify the value for SATA Mode is what it was
when the OS was installed.

If any component is overclocked reset it back to stock speeds!



Good places to read more:
My System SpecsSystem Spec
15 May 2017   #3
jlambert

Windows 7 proffesional x64
 
 

Everything is 2 months old that is in my PC. The motherboard I just received from Asus last week from them testing it and they said it was fine and just reflashed it and sent it back. I know it's not the hard drive tried another known working one did same thing soon as I get logged in it would bsod. The USB problem is only in windows at log in when in bios it works fine. I wish I had older parts that would work but everything I have is out of date.
My System SpecsSystem Spec
.

15 May 2017   #4
YoYo155

Windows 10
 
 

Hi That's only a partial answer, why can't you collect the files necessary for a proper analysis?
My System SpecsSystem Spec
28 May 2017   #5
jlambert

Windows 7 proffesional x64
 
 

Ok so I had warranty on my processor I sent it in and they sent me a new one. I installed it Friday and so far no bsod. So it looks like my processor went bad. Just wanted to let people know the outcome of what my problem ended up being.
My System SpecsSystem Spec
Reply

 BSOD 0x00000101 and 0x00000124 a couple mins after logging in




Thread Tools




Similar help and support threads
Thread Forum
PC freezes after 5 mins during gaming and BSOD error 0x00000101
I'm playing games at my PC when suddenly it freezes unresponsively, the only way is to restart by hitting the reset button on the cpu case. It all started when I bought a new 600W power supply because my previous PSU died. If i wait like a minute after it freezes it gives me a BSOD error...
Gaming
BSOD while playing multiple games error code 0x00000101 and 0x00000124
While playing multiple games such as 7 days to die, counter strike, league of legends, Dota 2, Starcraft 2, and many others my computer will often randomly get a BSOD, sometimes during an intense part of the game or when I am simply walking somewhere. I've gotten error code 0x00000101 and I got...
BSOD Help and Support
Laptop stays at Black screen for 10+ mins after logging in
I have Windows 7 on my laptop and after I start it up and enter my password to login to windows I have to wait another 10-15 minutes for my desktop to appear. It's just a black screen, but the kicker is that I can move my mouse and see it on screen. I've never heard of or seen anything like this...
Performance & Maintenance
Random BSOD during the first 30 Mins of logging in.
I get theese random BSODs when I log into my PC, it doesnt always happen but it happens alot. :picnic: :banghead: Also in that time my PC runs as if it were opening 50 Programs at once. I have my Minidumps attached. (Also the crash does not occur in safe mode, just in normal mode)
BSOD Help and Support
BSOD BATTLEFIELD BC2, error 0x00000124 or 0x00000101
Hi folks, I checked stability of my PC with Prime95 (CPU+RAM blended test) 3 hours and it's quite stable. However during playing BF BC2 game I recieve BSOD often. I can't attached the dump file due compressed size is 85Mb in the letter. So I paste the dump screen print. Could you please...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:54.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App