Hi Guys
I have attached my zip as per instructions.
My three bsods have occurred as follows:
once doing intensive 3d work (in 3d coat)
once in sleep mode, overnight
once on booting up in the morning (straight after login)
Any help would be massively appreciated.
Cheers
Jake
Diagnostic Test
RAM TEST
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums
Note
MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
Make a photo of the result and post it.
Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.
Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
The PSU, cooling and other stuff are NOT mentioned in the tool.
In the left corner below in your post you find 'My System Specs'. After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.
Ace, will give this a go. Thanks very much for your help, much appreciated!
ace = brilliant
Hi Axe (and anyone else following this)
I have done an initial memtest with all four sticks in. It came up with over a hundred and fifty thousand errors over 3 three hours (Photo attached).
I am starting individual stuck tests now.
Cheers
Jake
Quote