BSOD When putting my computer to sleep.

admiral ackbar · 30 Jun 2017

Hello dear users of Win7. I hope you are all well. I apologize if this may be a re-post from another user, but I have taken the time to search for the answer and well, I have failed.

I have only had the BSOD happen to me a few times but while using the computer itself, so I knew the issue at hand, but now I do not, it isn't clear to me what I should do, perhaps someone can take the time to help me? The issue is, when I put my computer to sleep, it goes to sleep but after a few hours it'll shut down and then I have to reboot the system and when I do I get the "Windows" box that explains what has happened. I recently had Win 10 but didn't enjoy it as I am a huge fan of Win 7 and have been for over 7yrs now. I freshly installed Win 7 again. Here is the best information I can provide. Please and thank you again for taking the time dear users!

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: FFFFF8800B987638
BCP2: 0000000000000002
BCP3: 0000000000000008
BCP4: FFFFF8800B987638
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\063017-19843-01.dmp
C:\Users\GHOST\AppData\Local\Temp\WER-28828-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

ICIT2LOL · 30 Jun 2017

Hello AA mate have you got an X box simulator hooked up to this machine by any chance because of this

Code:

BugCheck D1, {fffff8800b987638, 2, 8, fffff8800b987638}

*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
Probably caused by : MijXfilt.sys ( MijXfilt+1b638 )

Not sure if this is a driver problem but if you can update it - try it first because the Bug check is linking to a memory problem.

admiral ackbar · 30 Jun 2017

ICIT2LOL said:

Hello AA mate have you got an X box simulator hooked up to this machine by any chance because of this

Code:

BugCheck D1, {fffff8800b987638, 2, 8, fffff8800b987638}

*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
Probably caused by : MijXfilt.sys ( MijXfilt+1b638 )

Not sure if this is a driver problem but if you can update it - try it first because the Bug check is linking to a memory problem.

Hello ICIT2LOL. Thanks for your reply my friend. I have indeed installed an xbox controller program called "Motionjoy". Also you said linking to a memory problem, does this mean one of my RAM has an issue? Thanks again! :)

torchwood · 30 Jun 2017

I'll tell you something increase the size of your C partition.

Now can you tell me where you got your Dell product key, for your Asus

As you appear to have re-installed - 57 updates are now failling that includes drivers,
from the windows update log
WUApp WARNING: SetDescendentText called on non-existent id 'selectedUpdateDetailImportance

please run this tool copy/paste the output
http://go.microsoft.com/fwlink/?LinkID=52012

Roy

ICIT2LOL · 01 Jul 2017

Thanks Roy I am not much good at picking those errors and AA mate do as Roy says and we can go form there.

admiral ackbar · 01 Jul 2017

ICIT2LOL said:

Thanks Roy I am not much good at picking those errors and AA mate do as Roy says and we can go form there.

torchwood said:

I'll tell you something increase the size of your C partition.

Now can you tell me where you got your Dell product key, for your Asus

As you appear to have re-installed - 57 updates are now failling that includes drivers,
from the windows update log
WUApp WARNING: SetDescendentText called on non-existent id 'selectedUpdateDetailImportance

please run this tool copy/paste the output
http://go.microsoft.com/fwlink/?LinkID=52012

Roy

Dear gentlemen, it is with great happiness that I have solved this issue! I have followed your steps in taking care of the matter and it worked! I deleted drivers that weren't needed, such as the unsigned driver "motionjoy" I have ran some diagnosis and tests over night, did a whole bunch of driver updates and eureka! IT worked! Thank you both kindly for the help and time! :)

Roy, my original Dell product key came from my laptop which I then transferred to my desktop which I had built a while back without a OS, so I was forced to get Win 10, which I must say I dislike with a passion. I had also done some tweaks to my desktop to my liking so a lot of things in my zip might seem up and down.

torchwood · 01 Jul 2017

The ZIP reports show the current status of the computer at the time you ran them.

From your reply you are obviously running a non genuine system.
OEM keys are motherboard linked, (the one you currently have in use)
Its highly likely that MS has picked it up and DENIED you the updates i referred to in my last post.
in less than 28 days, unless you have an exploit in place, your comp i suspect will turn non-genuine.

post the results from that tool and i will be able to confirm it one way or another.

Roy

ICIT2LOL · 01 Jul 2017

Now just to add a titbit - sorry Roy if I ma gong off track abit but AA mate if you have to have 10 then it is easy to set up to look like 7 and not have to use any add on softarwe.

You simply right click an delete all that bloat at the Start and then type in the start box what you want on the Start meu

For example type This PC (Computer in 7) and then right click it a and pin it to the Start menu do it for msconfig , Control Panel Pictures Docs etc. etc until you are left with just what comes up with the Start menu in 7 \.

Having said that you can also pin to taskbar if you so wish on most of them but apart from the command prompt unnecessary.
The only one I have found you cannot pin to either is regedit see my pic of my Snady Bridge desktop the others are different in some ways because in 10 you can add some to one machine but not others these are the ones you definitely can.
The only thing I really dislike about 10 is the "double handling" of for example the Command prompt and snipping tool which you right click on and then have click on "More" to get admin rights