Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD minidump IRQL at or soon after start up

22 Aug 2017   #1

windows 7 home premium 64 bit
BSOD minidump IRQL at or soon after start up

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.
Locale ID: 1033

Additional information about the problem:
BCCode: a
BCP1: FFFFF80000BA7000
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF80002B34DC9
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:

Read our privacy statement online:
Windows 7 Privacy Statement

If the online privacy statement is not available, please read our privacy statement offline:

My System SpecsSystem Spec
25 Aug 2017   #2

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10

Hello and welcome Matt please follow this first
Now before we can help we do need to know what is in your machine so please do this System Info - See Your System Specs - Windows 7 Help Forums
or either enter the specs of your system in your forum profile the specs will appear when we click on that little box bottom left of the post screen it is for me the preferable option as it is easy. As you may appreciate it is very hard when you donít know what one is working with for example a diesel or petrol engine.
*(pretyped to save time)

An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arg1: fffff80000ba7000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
	bit 0 : value 0 = read operation, 1 = write operation
	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002b34dc9, address which referenced memory
In the meantime after seeing this I would suggest you follow this as well please follow this to the letter the only time you can stop the test for sure is if errors appear straight away or very shortly into the test.
Now to make absolutely we are on the same page the memtest linked here is the only*one we recommend and it MUST be run for at least 8 passes or you may as well not bother. It is rather lengthy and best left for a downtime for that machine - overnight is good. Having said that you can stop the test if errors show up while you are around and then it is a matter of tracking down the bad stick of RAM.* RAM - Test with Memtest86+ - Windows 7 Help Forums
(This is pretyped to save time)
My System SpecsSystem Spec

 BSOD minidump IRQL at or soon after start up

Thread Tools

Similar help and support threads
Thread Forum
BSOD on window start up, error minidump.dmp Caused by ntkrnlmp.exe.
SF_Diagnostic_Tool file included ,need some help for this problem ps. It's annoyed me so much and also extend the boot times. Thank you
BSOD Help and Support
PC will not start up sometimes (minidump/power off), BSOD, Win 7 x64
Hello, Please help, computer will not start up sometimes (minidump), BSOD. It seems to happen once a week where it will not start up the first time, after the BIOS loads it goes to a minidump, and then the computer just turns off. I have to manually power it on again to get it going. ...
BSOD Help and Support
BSOD / Appcrash - IRQL / Page Fault / Driver IRQL
hey, experiencing so many BSOD's over the last couple days. w7 64 bit full install fairly new comp i5 2400 6850
BSOD Help and Support
++Help!!++ BSOD on start up MINIDUMP inc.
Hi, I just successfully booted my computer after series of BSOD. I have no idea what the problem is... My comp spec is: OS: win7 CPU i5 Motherboard: gigabyte p55A-UD4 HDD: 1gig Cavier black Mem: 4gig not sure about the brand
BSOD Help and Support
BSOD crash after start up- minidump attached-please help
Hello everybody, Can anyone help with BSOD crash that I am having. I have attached the minidump below. I did not do anything unusual-do not seem to remember adding hardware or software..but I see a blue screen as soon as the boots up completely and Windows 7 loads. BTW, I have a gateway...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 22:18.
Twitter Facebook Google+