New
#1
BSOD after partition wizard copy of RAID 0 to non raid drive
Hi 7 forum,
The mission is to copy a raid 0 array to a non raid SSD drive and then move the fresh copy to another PC.
So I successfully copied a RAID 0 array (Win7 Pro) to a non RAID SSD using minitool partition wizard server edition. After the copy completed I left the bios booting to RAID and disconnected the 2 drives in the array (sata0 and sata1 ports) and left the fresh copy in sata2 port and the PC booted up perfect. Next I move the fresh copy into sata0 port and fire up PC and it runs perfect. Do several reboots to make sure all without issue.
Next I go into bios and change the SATA from RAID to AHCI and reboot. Quickly see the windows logo and
BSOD flashes then quickly jumps to repair windows option. I run the repair and after a few minutes say "Cant repair". Do this a few times with identical results.
I reset the bios SATA option to RAID and it boots up normal on the fresh copy. I took the fresh copy to the new shuttle DS81 and it behaved the same way (BSOD into repair without success).
I need this to boot from AHCI bios so I can move this drive to another shuttle.
I formatted the MBR to no avail. Any ideas would be greatly appreciated.
PC is Shuttle XPC SH87R, i7, 16G RAM and the DUMP is uploaded.