Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Recently fixed one BSOD, getting new code 0x1e

24 Jun 2018   #1
olivert

Windows 7 Home Premium 64 bit
 
 
Recently fixed one BSOD, getting new code 0x1e

I only just closed another thread recently, but I started getting a new BSOD/error code x1e. I ran it through an online crash analyzer and it was initially pointing to MSIafterburner, at which point I ran a complete uninstall and installed NVIDIA inspector, as I prefer to run my graphics card fans even though by default sometimes they don't turn on until 70C (yikes). Anyways, I just had a crash after a few days and the analyzer is now pointing to the NVIDIA inspector.

Looking for help or recommendations that might ease this issue.




Attached Files
File Type: zip OLI-PC-Sun_06_24_2018_121750_69.zip (3.58 MB, 3 views)
My System SpecsSystem Spec
.
24 Jun 2018   #2
HonorGamer

Windows 8.1 Pro x64
 
 

Hello!

Code:
MaxSpeed: 3400 

CurrentSpeed: 3502 


Processor may be overclocked! 
Expected Frequency: 3400 
Actual Frequency: 3502 
Overclock Ratio: 1.03
Please revert back to normal speed.
My System SpecsSystem Spec
25 Jun 2018   #3
olivert

Windows 7 Home Premium 64 bit
 
 

Oh man! This is gonna sound kinda dumb but I don't know how to change that (safely).
My System SpecsSystem Spec
.

25 Jun 2018   #4
HonorGamer

Windows 8.1 Pro x64
 
 

You should be able to go into the motherboard's BIOS (usually pressing F2 as the PC boots up) and simply reset the BIOS back to factory settings.
My System SpecsSystem Spec
29 Jun 2018   #5
olivert

Windows 7 Home Premium 64 bit
 
 

Have been busy this week, tried to do this, reset to recommended defaults. For some reason the clock speed won't go under 3500mhz. Also left computer running to see what was going on. Left for a while and when I came back computer was black screen but still on and having since tried to restart, it loads thru BIOS but won't load windows, no logo, no login. Any idea what to do?
My System SpecsSystem Spec
29 Jun 2018   #6
olivert

Windows 7 Home Premium 64 bit
 
 

I'll make a quick addition - after unplugging the PSU for a couple of minutes, I attempted another restart and it looked like it was going properly until login screen never showed up. The mouse did get a little win7 wheel for a moment though.
My System SpecsSystem Spec
29 Jun 2018   #7
olivert

Windows 7 Home Premium 64 bit
 
 

I've been trying to repair start up, etc, and just now decided to run chkdsk /r and the attached is a photo of the results. My HDD is supposed to be 1TB... Did I fry it?
My System SpecsSystem Spec
29 Jun 2018   #8
HonorGamer

Windows 8.1 Pro x64
 
 

My System SpecsSystem Spec
30 Jun 2018   #9
axe0

Windows 10 Pro
 
 

The System Reserved partition appears to have been checked which is a small partition. Depending on the way your hard drive is partitioned, there are by default 1/2 or more small partitions for the recovery and booting.
Run diskpart in the command prompt to find out on which partition letter you need/want to run chkdsk on.
Code:
diskpart
list volume
My System SpecsSystem Spec
Reply

 Recently fixed one BSOD, getting new code 0x1e




Thread Tools




Similar help and support threads
Thread Forum
BSOD in games and random, Bugcheck code: 0x1E (0x0, 0x0, 0x0, 0x0)
My system has BSOD twice today, used to do it many time a day before i re-installed windows. I have no idea what causes it and would really like to know. Most recent WhoCrashed said "This was probably caused by the following module: ntoskrnl.exe (nt+0x75B90)" and the other says "This was probably...
BSOD Help and Support
BSOD shortly after start up, Bugcheck code: 0x1E (0xFFFFFFFFC0000005,
Hello, I have a Toshiba laptop that started with the BSOD right after a virus that was removed, not sure if related. Here is my who crashed copied and pasted. Not sure how to do a zip file of my minidump. :o System Information (local) </B> computer name: OD-PC windows version: Windows 7...
BSOD Help and Support
Error code 0xC8000247. Recently cloned my HDD, it might be the reason.
Diagnostic Report (1.9.0027.0): ----------------------------------------- Windows Validation Data--> Validation Code: 0x8004FE21 Cached Online Validation Code: 0x0 Windows Product Key: *****-*****-6377X-2YQPX-HHWQM Windows Product Key Hash: TQExrpoWs54DRUYMBwyUGuvVatA= Windows Product ID:...
Windows Updates & Activation
ThinkPad T420s random BSOD with no fixed code
Hi, This ThinkPad T420s was purchased last year and no one has been using it since it gets BSOD randomly. Now I've decided to try to find the cause of the BSOD so I can contact the repair centers. The BSOD occurs quite randomly. Sometimes I could trigger a BSOD by stressing the mSATA...
BSOD Help and Support
fixed BSOD isn't fixed :(
right. i had another thread here but we fixed it. apparently though, we didn't. i just 2 BSOD's in a timespan of about an hour. i didn't package the first dumps, because i hoped that it was just an anomaly... anyway, a .rar is attached, can anyone please look at it? tnx :) P.S i got my first few...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:17.
Twitter Facebook Google+