Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Stop Codes During Install

04 Sep 2018   #1

se7en x64 Enterprise
Stop Codes During Install

On a separate machine while trying to install a proven disk I get Stop Codes "0x0A", (10 characters) "0x80" (16 characters) and "0x02". (16 characters)
It happens while setup is collecting info just before "Installing Files" starts. Once it got to 2% installing files with DVD and once it got to 80% installing files using same setup files on a USB Flash Drive. I don't think the 80% was correct because there was only a little over a GB worth of files on the drive.
I've tried the on-board and discreet graphics, both CD Burners individually, no CD Burners.
I'm tired of looking at GParted and it's tired of looking at me.
Thank for any ideas.

michael clyde

My System SpecsSystem Spec
04 Sep 2018   #2

Win 10 x64, Linux Lite, Win 7 x64, BlackArch, & Kali

Hi mchldpy,
Expound on proven disk please!
My System SpecsSystem Spec
06 Sep 2018   #3

se7en x64 Enterprise

Proven Disk = the machine I'm speaking to you from. The only se7en install media I have. Fresh copy from the .iso file. I tried it on this machine (2x Gigabyte® GA-MA785-US2H MB) and it completed fine. (again) The trouble is on a new Gigabyte® GA-MA785-UD3H MB. It's now informing me at reboot, when it should boot from the new install, that the BCD/Boot Configuration is not right so ...
My System SpecsSystem Spec


 Stop Codes During Install

Thread Tools

Similar help and support threads
Thread Forum
BSODs - various STOP codes
Been researching forum with the mounds of helpful info. However, we keep getting BSODs with various stop codes. Need help with figuring out root cause. At one point it was so bad, the PC would not boot and we refreshed from factory image which helped for awhile. A couple months later getting...
BSOD Help and Support
BSOD - various stop codes
Windows 7 Home Premium 64bit Full Retail Built the system last summer, but the OS was installed about a month ago with Service Pack 1. BSODs occur every few days. I suspend to memory often and the computer will BSOD when waking sometimes -- though this is usually not a BLUE screen, rather a...
BSOD Help and Support
BSOD with various stop codes - need help with minidumps
Hi everyone, I've been researching this problem without success. The BSODs started last week. I first ran the Memory Diagnostic tool and found some "hardware" problems. However, the stop codes that I've been getting seem to point toward a driver issue. It could be both, though. The...
BSOD Help and Support
BSOD with assorted stop codes
Hiya. After about 50 attempts at installing Windows 7 Ultimate 64-bit to a newly built computer, I finally got it installed, despite all the "source file unavailable" messages and random BSODs, and ran it rock solid stable for about 6 hours last night. When I turned it on this morning, however,...
BSOD Help and Support
BSOD (Various stop codes)
Hi,have my computer for around 4 months now and lately i've been getting these BSOD's and kind of annoying seeing as I work from home and as you can tell I don't get alot of work done these days due to this,this thread is my final solution before I have to go spending some money on a fix..but i...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 19:47.
Twitter Facebook