Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 ultimate no longer working after bios update

24 Oct 2018   #11
HOCKEY97

WINDOWS 7 ULTIMATE
 
 

I tried putting in the old cpu and it didn't work at all didn't boot up. I then had an idea and pressed f8 when windows would try to load it loaded up a screen to start in safe mode. There was an option to use low resolution and I selected that. It then booted into windows. Everything worked and found out my graphics driver was in the process of updating in the background when I started to upgrade my cpu. So, the issue was a bad currupted video driver. I had to reinstall the driver when I got into windows with low resolution.

Now everything works perfectly.


My System SpecsSystem Spec
.
Reply

 Windows 7 ultimate no longer working after bios update




Thread Tools




Similar help and support threads
Thread Forum
Windows no longer genuine, BIOS missing license
I'm using Windows 7 Ultimate 64 bit and it was genuine for over a year and suddenly it is not genuine. When I try activating with my key it said that the BIOS is missing a license. Does anyone know why this is? Thanks. :)
Windows Updates & Activation
startup repair infinite loop after BIOS update, recovery not working
Hello, I recently attempted to update my BIOS (Gigabyte F8 to F10) so that I could upgrade my CPU from a sandy bridge to an ivy bridge. I did not do the cpu upgrade, yet, just the BIOS flash. The flash, using Gigabyte's q-flash) went fine, according to the flash results screen. I then rebooted,...
General Discussion
Windows Update no longer working
I no longer can get Windows update to work; only getting a screen that reads: "Windows Update can no longer check for updates, because the service is not running. You may need to restart your computer." Please see attachment. I have restarted the computer but still get the same message. ...
Windows Updates & Activation
Windows Update no longer working, Windows now states not genuine
I recently upgraded my hard disk and operating system to Windows 7 Professional from XP Professional that was orignally on my Lenovo T61p Think Pad. The Windows as purchased from Micro Center was an OEM system builder pack. Can you advise how I can resolve these issues?
Windows Updates & Activation
Onboard graphics card not working after BIOS update!
Hello all! Please help me. I purchased motherboard with the manufacturer number of MB.G0409.005 (MB.G0409.005 GATEWAY MOTHERBOARD DESKTOP BOARD SOCKET AM2) on 2/3/12. I had put it into my system and then proceeded to install upgrades from the Gateway website. I saw there was a BIOS update...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:14.
Twitter Facebook