Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: hp 250 g3 err BSOD BCCode: 9f BCP1: 0000000000000003

11 Dec 2018   #21
wither 2

Windows 7 Pro SP1 64 bit
 
 

I've asked this question at least once before-

If you go to Control Panel, Device manager, are any errors shown in Universal Serial Bus Controllers?

Perhaps you can provide a screenshot.


My System SpecsSystem Spec
.
11 Dec 2018   #22
figi77

Windows 7 Ultimate x64
 
 

in the device manager is all right
no yellow triangle
My System SpecsSystem Spec
11 Dec 2018   #23
figi77

Windows 7 Ultimate x64
 
 

screenshot
My System SpecsSystem Spec
.

11 Dec 2018   #24
wither 2

Windows 7 Pro SP1 64 bit
 
 

On the other hand, there's also no "unknown device" shown. Where are you seeing that.

Did you try installing the Realtek driver suggested by axe0?

What is your anti-virus?
My System SpecsSystem Spec
11 Dec 2018   #25
axe0

Windows 10 Pro
 
 

Could you check Windows Updates for updates please. If you already ran Windows Update recently, please run it once more just to verify that there are no updates.
My System SpecsSystem Spec
12 Dec 2018   #26
figi77

Windows 7 Ultimate x64
 
 

Hello friends
unknown device = usb3 splitter
as soon as I installed it, a triangle disappeared
Realtek designed axe0 is installed
see the picture
today I installed update win first once
nor do I have any antivirus
as I mentioned at the beginning, I was doing a clean install of windows 7
after update:

Learn more about the problem:
** BCCode: and
** BCP1: FFFFF8000313B254
** BCP2: 0000000000000002
** BCP3: 0000000000000008
** BCP4: FFFFF8000313B254
** OS Version: 6_1_7601
** Service Pack: 1_0
** Product: 256_1
My System SpecsSystem Spec
12 Dec 2018   #27
figi77

Windows 7 Ultimate x64
 
 

please check

thank you for your further help
My System SpecsSystem Spec
12 Dec 2018   #28
wither 2

Windows 7 Pro SP1 64 bit
 
 

The BSOD prior to this one was an IRQ problem.

I think this one is related to the splitter. I'm no expert or even close to one but this error occurs repeatedly in the event log-

Driver Management concluded the process to install driver NULL Driver for Device Instance ID PCI\VEN_8086&DEV_0F35&SUBSYS_2213103C&REV_0E\3&11583659&0&A0 with the following status: 0xe0000203.

I assume it's related to that device.

Can you plug the splitter directly into the motherboard?

Do you have any system problems without that device.
My System SpecsSystem Spec
13 Dec 2018   #29
axe0

Windows 10 Pro
 
 

How old is this laptop?
My System SpecsSystem Spec
14 Dec 2018   #30
figi77

Windows 7 Ultimate x64
 
 

Hello friends
so every day bsod
now not after rebuilding
, but during work

* wither 2 do not understand?
how much do I connect to the motherboard on my laptop?

ax00 4 years

why is it bsod?
all my drivers have been used
Thanks for help
My System SpecsSystem Spec
Reply

 hp 250 g3 err BSOD BCCode: 9f BCP1: 0000000000000003




Thread Tools




Similar help and support threads
Thread Forum
Random BSOD, BcCode 19 0000000000000003, FFFFF8000306B880, FFFFFA800A8
Hey all, So, I'm having a random and occasional BSod. Also, 3.0 usb eXtensible driver issues which I don't know if it's related or not. Here are the dump files. Thanks!
BSOD Help and Support
BSOD when i switch on laptop BCCode: 9f BCP1: 0000000000000003
My laptop doesn't cease to do BSOD at each new day of its inclusion. I mean that the laptop steadily reboots once a day and after it functions normally. But doesn't pass day when it wouldn't reboot. There is a wish to get rid of this problem. It is always the same error message:...
BSOD Help and Support
BSOD Random crashes - BCCode:9f BCP1:0000000000000003
I am getting random BSOD on my PC. The problem signature is Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 2057 Additional information about the problem:
BSOD Help and Support
BSOD when computer was idle, BC Code 9f, BCP1:0000000000000003
My laptop continues to blue screen and it is usually when it's been idle/hibernated. I'm not sure if it's an issue with it overheating or the fan not getting enough air/circulation as the fan seems to run/make noticeable noise all the time. It is always the same error message:...
BSOD Help and Support
Apparently Random BSOD (BCCode:f4 BCP1: 0000000000000003)
Hi everybody... I'm new here, so I hope Iím posting this correctly. :) We have a brand new Dell Vostro 3460 in our company that I set up with all the software required to run in our small consulting company a couple of weeks ago. I applied all the upgrades and installed all the updated drivers...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:40.
Twitter Facebook