Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: hp 250 g3 err BSOD BCCode: 9f BCP1: 0000000000000003

01 Dec 2018   #1
figi77

Windows 7 Ultimate x64
 
 
hp 250 g3 err BSOD BCCode: 9f BCP1: 0000000000000003

Product Name: HP 250 G3 Notebook PC
Product number: K3X07EA # BCM
Serial number: CND4446Q40
BIOS: F.45-06 / 27/2018
Keyboard revision: 57.58
Total memory: 4.00 GB
Processor name: Intel (R) Pentium (R) CPU N3540 @ 2.16GHz

The name of the Microsoft Windows 7 Ultimate operating system
Version 6.1.7601 Service Pack 1, set 7601
Description of the operating system Not available
Manufacturer of the Microsoft Corporation operating system
The name of the ZUZUNA-PC system
Manufacturer of Hewlett-Packard
HP 250 G3 Notebook PC Model
Type of system x64-based PC
Processor Intel (R) Pentium (R) CPU N3540 @ 2.16GHz, 2159 MHz, number of cores: 4, number of logic processors: 4
BIOS Version and Insyde Date F.45, June 27, 2018
SMBIOS version 2.7
Windows C: \ Windows directory
System directory C: \ Windows \ system32
Boot device \ Device \ HarddiskVolume1
Local Settlement Slovak Republic
Layer HAL Version = "6.1.7601.24291"
Username zuzuna-PC \ zuzuna
Central European time zone (normal)
A physical memory (RAM) of 4,00 GB is installed
Total physical memory of 3.89 GB
Available physical memory of 1.62 GB
Total virtual memory of 7.78 GB
Available virtual memory of 5.13 GB
Pager space of 3.89 GB
The C: \ Pagefile.sys paging file

Windows 7: BSOD Random Failures - BCCode: 9f BCP1: 0000000000000003
usb mause does not respond after awakening
please help me




Attached Files
File Type: zip ZUZUNA-PC-so_01__12__2018_161600,87.zip (1.80 MB, 2 views)
My System SpecsSystem Spec
.
01 Dec 2018   #2
wither 2

Windows 7 Pro SP1 64 bit
 
 

It looks like you might have a driver problem. Since you said the mouse won't work on startup so I would either connect it to a different USB port or it's receiver to a different USB port (depending on whether or not you have a wireless mouse) and see if that fixes the problem. If so, we can go from there.
My System SpecsSystem Spec
01 Dec 2018   #3
axe0

Windows 10 Pro
 
 

It looks like the major function of an IRP is invalid which identifies what dispatch routines the IO manager has to invoke. It seems there are quite a few routines that have been cancelled by Windows.
Code:
Dispatch routines:
[00] IRP_MJ_CREATE                      fffff88005106f60	usbhub!UsbhGenDispatch
[01] IRP_MJ_CREATE_NAMED_PIPE           fffff80002cbeed0	nt!IopInvalidDeviceRequest
[02] IRP_MJ_CLOSE                       fffff88005106f60	usbhub!UsbhGenDispatch
[03] IRP_MJ_READ                        fffff80002cbeed0	nt!IopInvalidDeviceRequest
[04] IRP_MJ_WRITE                       fffff80002cbeed0	nt!IopInvalidDeviceRequest
[05] IRP_MJ_QUERY_INFORMATION           fffff80002cbeed0	nt!IopInvalidDeviceRequest
[06] IRP_MJ_SET_INFORMATION             fffff80002cbeed0	nt!IopInvalidDeviceRequest
[07] IRP_MJ_QUERY_EA                    fffff80002cbeed0	nt!IopInvalidDeviceRequest
[08] IRP_MJ_SET_EA                      fffff80002cbeed0	nt!IopInvalidDeviceRequest
[09] IRP_MJ_FLUSH_BUFFERS               fffff80002cbeed0	nt!IopInvalidDeviceRequest
[0a] IRP_MJ_QUERY_VOLUME_INFORMATION    fffff80002cbeed0	nt!IopInvalidDeviceRequest
[0b] IRP_MJ_SET_VOLUME_INFORMATION      fffff80002cbeed0	nt!IopInvalidDeviceRequest
[0c] IRP_MJ_DIRECTORY_CONTROL           fffff80002cbeed0	nt!IopInvalidDeviceRequest
[0d] IRP_MJ_FILE_SYSTEM_CONTROL         fffff80002cbeed0	nt!IopInvalidDeviceRequest
[0e] IRP_MJ_DEVICE_CONTROL              fffff88005106f60	usbhub!UsbhGenDispatch
[0f] IRP_MJ_INTERNAL_DEVICE_CONTROL     fffff88005106f60	usbhub!UsbhGenDispatch
[10] IRP_MJ_SHUTDOWN                    fffff8800512c540	usbhub!UsbhDeviceShutdown
[11] IRP_MJ_LOCK_CONTROL                fffff80002cbeed0	nt!IopInvalidDeviceRequest
[12] IRP_MJ_CLEANUP                     fffff80002cbeed0	nt!IopInvalidDeviceRequest
[13] IRP_MJ_CREATE_MAILSLOT             fffff80002cbeed0	nt!IopInvalidDeviceRequest
[14] IRP_MJ_QUERY_SECURITY              fffff80002cbeed0	nt!IopInvalidDeviceRequest
[15] IRP_MJ_SET_SECURITY                fffff80002cbeed0	nt!IopInvalidDeviceRequest
[16] IRP_MJ_POWER                       fffff88005106f60	usbhub!UsbhGenDispatch
[17] IRP_MJ_SYSTEM_CONTROL              fffff88005106f60	usbhub!UsbhGenDispatch
[18] IRP_MJ_DEVICE_CHANGE               fffff80002cbeed0	nt!IopInvalidDeviceRequest
[19] IRP_MJ_QUERY_QUOTA                 fffff80002cbeed0	nt!IopInvalidDeviceRequest
[1a] IRP_MJ_SET_QUOTA                   fffff80002cbeed0	nt!IopInvalidDeviceRequest
[1b] IRP_MJ_PNP                         fffff88005106f60	usbhub!UsbhGenDispatch

Please run driver verifier using the following settings for 48 hours.
  • Special Pool
  • Force IRQL checking
  • Pool Tracking
  • Deadlock Detection
  • Security Checks
  • Miscellaneous Checks
  • Power framework delay fuzzing
  • DDI compliance checking


Warning: driver verifier could cause boot issues and/or performance issues.

Resetting driver verifier options (recommended in this order)
  1. In normal mode open an administrator command prompt and enter the below command
  2. In safe mode open an administrator command prompt and enter the below command
  3. On 3 boot failures, you'll boot automatically to the recovery options,
    • click Troubleshoot
    • go to the advanced options
    • choose command prompt
    • enter the below command
  4. Boot with the recovery media, see above 4 steps in option 3.
  5. Via the recovery options or recovery media, select a restore point prior enabling driver verifier
Code:
verifier /reset


Crashed when running driver verifier
  1. Reset driver verifier
  2. Boot in normal mode if necessary
  3. Follow Blue Screen of Death (BSOD) Posting Instructions to provide the requested logs
My System SpecsSystem Spec
.

03 Dec 2018   #4
figi77

Windows 7 Ultimate x64
 
 

C:\Windows\system32>verifier /reset
No settings were changed.

C:\Windows\system32>

I'm sorry I'm not good at my computer
I do not understand your solution
could you describe me more precisely what to do?

I reinstalled win7 again
this time I forgot the win update
remains the same a problem


Attached Files
File Type: zip ZUZANA-PC-po_03__12__2018_154229,61.zip (178.8 KB, 2 views)
My System SpecsSystem Spec
03 Dec 2018   #5
wither 2

Windows 7 Pro SP1 64 bit
 
 

Did you try what I suggested? Obviously, you would need to reconnect your mouse to the receiver if you have a wireless mouse.

Open Control Panel and select Device Manager. First check to see if there's an error symbol (yellow black exclamation in triangle) for Mice and.......................

If not, open Universal Serial Bus Controllers. Are any errors shown there?
My System SpecsSystem Spec
03 Dec 2018   #6
axe0

Windows 10 Pro
 
 

Please read my post carefully again. I would like you to run a test, driver verifier, to test drivers.
Driver verifier is a diagnostics test, it will validate selected drivers on selected actions, that may cause performance issues or even boot issues. If driver verifier finds a driver doing something wrong when this driver is performing 1 of the selected actions, driver verifier will crash your system.

I'll rewrite my post.
My System SpecsSystem Spec
03 Dec 2018   #7
figi77

Windows 7 Ultimate x64
 
 

Issues found
Device Unknown Appliance Does Not Have Driver Unknown device does not have a driver
No driver is installed for device Unknown device. Not fixed
Use a solution for the Completed driver problem
Install the driver for this Completed device
*
Ralink_RT3290_Bluetooth_01 does not have a device Ralink_RT3290_Bluetooth_01 does not have a driver
There is no driver installed for Ralink_RT3290_Bluetooth_01. Not fixed
Use a solution for the Completed driver problem
Install the driver for this Completed device
*
Problem with PnP devicesProvider for PnP devices
There have been problems with some PnP devices. Windows will take additional steps to resolve issues with these devices. Detected
*The Unknown device does not have a Not fixed driver
*
No driver is installed for device Unknown device.
Device information
Identification: IUSB3 \ ROOT_HUB30 \ 4 & 16DD74CC & 0
Error code: 28
*
*
I can not install my drivers
please help me?
is it possible that I occasionally become a bsod?
My System SpecsSystem Spec
04 Dec 2018   #8
figi77

Windows 7 Ultimate x64
 
 

Popis problému:
Názov problémovej udalosti: BlueScreen
Verzia OS: 6.1.7601.2.1.0.256.1
Identifikácia miestneho nastavenia: 1051

Ďalšie informácie o probléme:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA80061F9060
BCP3: FFFFF80000BA2748
BCP4: FFFFFA8006E8D6F0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Súbory, ktoré pomáhajú popísať problém:
C:\Windows\Minidump\120418-16380-01.dmp
C:\Users\zuzana\AppData\Local\Temp\WER-59561-0.sysdata.xml

Prečítajte si prehlásenie o používaní osobných údajov online:
Declaracion de privacidad de Windows 7

Ak prehlásenie o používaní osobných údajov nie je dostupné v režime online, prečítajte si ho v režime offline:
C:\Windows\system32\sk-SK\erofflps.txt

good morning
to this morning everything ok
I woke up my laptop from my sleeping
and the abbot happened
BSOD


Attached Files
File Type: zip ZUZANA-PC-ut_04__12__2018__83629,99.zip (307.0 KB, 5 views)
My System SpecsSystem Spec
04 Dec 2018   #9
wither 2

Windows 7 Pro SP1 64 bit
 
 

Unplug your Ralink bluetoothdevice and reboot. Do you still get the BSODs.
My System SpecsSystem Spec
04 Dec 2018   #10
figi77

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by wither 2 View Post
Unplug your Ralink bluetoothdevice and reboot. Do you still get the BSODs.
Excuse me how do I fix it?

I'm not experienced
My System SpecsSystem Spec
Reply

 hp 250 g3 err BSOD BCCode: 9f BCP1: 0000000000000003




Thread Tools




Similar help and support threads
Thread Forum
Random BSOD, BcCode 19 0000000000000003, FFFFF8000306B880, FFFFFA800A8
Hey all, So, I'm having a random and occasional BSod. Also, 3.0 usb eXtensible driver issues which I don't know if it's related or not. Here are the dump files. Thanks!
BSOD Help and Support
BSOD when i switch on laptop BCCode: 9f BCP1: 0000000000000003
My laptop doesn't cease to do BSOD at each new day of its inclusion. I mean that the laptop steadily reboots once a day and after it functions normally. But doesn't pass day when it wouldn't reboot. There is a wish to get rid of this problem. It is always the same error message:...
BSOD Help and Support
BSOD Random crashes - BCCode:9f BCP1:0000000000000003
I am getting random BSOD on my PC. The problem signature is Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 2057 Additional information about the problem:
BSOD Help and Support
BSOD when computer was idle, BC Code 9f, BCP1:0000000000000003
My laptop continues to blue screen and it is usually when it's been idle/hibernated. I'm not sure if it's an issue with it overheating or the fan not getting enough air/circulation as the fan seems to run/make noticeable noise all the time. It is always the same error message:...
BSOD Help and Support
Apparently Random BSOD (BCCode:f4 BCP1: 0000000000000003)
Hi everybody... I'm new here, so I hope I’m posting this correctly. :) We have a brand new Dell Vostro 3460 in our company that I set up with all the software required to run in our small consulting company a couple of weeks ago. I applied all the upgrades and installed all the updated drivers...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 14:32.
Twitter Facebook Google+