Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BOOTMGR missing after power outage. SPECIAL CASE!

3 Weeks Ago   #1
peterm1981

Windows 7 Home Premium x64
 
 
BOOTMGR missing after power outage. SPECIAL CASE!

Hi everyone, I know there is a million and one tutorials, fixes and guides online and youtube and trust me I`ve scoured all of them in the last 3 days. With no avail.
My problem is the following.
I had a power cut and my windows 7 didn`t boot after, total lack of boot record and boot partition.
I tried fixing with Windows 7 USB, repair it ways that it cant be fixed automatically and that I should contact microsoft. First of all in the repair usb, the operating system or drive is not shown in the window where it is supposed to show up.
I made an Aomei partition assistant boot USB and I saw that my system partition is OK, all my data is there. I set it to active, rebuild MBR and restart. Still nothing.
Went back to windows repair USB, command line. Used Diskpart to select disk, select partition, active, exit.
Used Bootrec /fixboot, success. bootrec /fixmbr, success. bootrec /scanos, success, found windows on C:
then i got to bootrec /rebuildmbr and says the system is not available or invalid.

For now I split the partitions and managed to use a 70 GB partition to install windows 7 to at least copy my files from the unbootable partition and my other SSD.

My question is.....why cant i copy or port the new install bootmgr or boot files to the NON-working old partition and make it active and boot again.
Nothing seems to work, I would need files from that windows OS for my work. Is there any way to ghost just the partition or something. So now my C is the new 70 GB partition with working windows 7 but I would need the windows on the old partition to also be bootable.

Appreciate all the help I can get....exhausted and stumped after 2 days of trial and error.


My System SpecsSystem Spec
.
3 Weeks Ago   #2
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

Do you have any shadow copies or a backup image?

If not, you can try this:Cannot get into Windows desktop. Stuck on black screen, DWM.exe crash
My System SpecsSystem Spec
3 Weeks Ago   #3
peterm1981

Windows 7 Home Premium x64
 
 

No I dont have shadow copy or image file. I only have a Windows 7 Installer.
My System SpecsSystem Spec
.

3 Weeks Ago   #4
RolandJS

Windows 7 Professional 64-bit
 
 

If that w7 installer is the dvd for that computer, a repair install might work, it might ask for product key, hope you have it.
My System SpecsSystem Spec
3 Weeks Ago   #5
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

Did you try replacing the hives with backups - as explained in the link in my last post? Everything you need to do it is at that link.

Even if you have no shadow copies (and therefore no restore points), you have probably got hive backups.

Quote   Quote: Originally Posted by peterm1981 View Post
No I dont have shadow copy or image file. I only have a Windows 7 Installer.
My System SpecsSystem Spec
3 Weeks Ago   #6
FreeBooter

Windows 10 Pro x64
 
 

Since the BCD store exists and lists a Windows installation, you'll first have to "remove" it manually and then try to rebuild it again.

At the Command Prompt, type below command as shown and then press Enter:

Code:
C:
At the Command Prompt, type below command as shown and then press Enter:

Code:
bcdedit /export C:\bcdbackup
The bcdedit command is used here to export the BCD store as a file: bcdbackup. There's no need to specify a file extension.

The command should return the following on screen:
The operation completed successfully.

Meaning the BCD export worked as expected.


At this point, you need to adjust several file attributes for the BCD store so you can manipulate it. At the prompt, execute the attrib commands exactly like this:

Code:
attrib c:\boot\bcd -h -r -s
What you just did with the attrib command was remove the hidden, read-only, and system attributes from the file bcd. Those attributes restricted the actions you could take on the file. Now that they're gone, you can manipulate the file more freely - specifically, rename it.

To rename the BCD store, execute the ren command as shown:

Code:
ren C:\boot\bcd   bcd.old
Now that the BCD store is renamed, you should now be able to successfully rebuild it.

Try rebuilding the BCD again by executing the following, followed by Enter:

Code:
bootrec /scanos
bootrec /rebuildbcd
Restart your computer after rebuilding the BCD store.
My System SpecsSystem Spec
Reply

 BOOTMGR missing after power outage. SPECIAL CASE!




Thread Tools




Similar help and support threads
Thread Forum
Challenging Case - How to reset user password under special username
Hello, I encounter a difficult case recently Background: 1: The user account HKDM/kit.tsui is shown after starting the window 2: There is a button to switch user account. If you click this button, you are allowed to type username and password. 3: The window is installed in D driver. In...
General Discussion
Windows 7 upgrade missing after power outage
Hi everyone I ran into something today I never seen before. I setup and sold a computer that I upgraded from vista to windows 7 by running upgrade option inside vista home premium to 7 home premium. Everything was working fine for 6 months. The customer brought it in my shop today and said the...
Windows Updates & Activation
BootMGR Missing.. Unusual Case
Hi seven forums I am having a problem with my pc today. It started when I was playing Mass Effect and all of a sudden my computer froze. I rebooted and during reboot I noticed the BOOT_DEVICE_LED was lit up solid red during the reboot. Surely enough my screen read SELECT PROPER BOOT DEVICE AND...
General Discussion
BSOD following power outage
Hello, I have been trying to sort out my computer for about a week now. My husband turned on my computer a few hours prior to the arrival of Hurricane Sandy and forgot to shut it down. We lost power and it was not shut down properly. I get a BSOD when Windows loads and gets to the login...
BSOD Help and Support
Special situation Bootmgr is missing
I am going to try my best to explain this problem in its entirety, i have a very complex problem on my hands and i am trying to not lose my mind. OS: Windows 7 home premium 64-bit The first error i received was OS not found. I prepared a USB stick with my Win 7 ISO files using the download...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:47.
Twitter Facebook