Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Windows Error Recovery Boot Loop

3 Weeks Ago   #1
anothertwenty4

Windows 7 Home Premium x64
 
 
BSOD Windows Error Recovery Boot Loop

hello,

I want to thank everyone who contributes to this forum. It has been very helpful and i'm grateful to have found this site. However, i have found myself in a bit of a pickle with this one and i don't seem to be qualified to handle on my own, but I believe you guys may be.

I have provided pictures of the screens i can access. If it's not pictured, I have not been able to access it.

Here's what I'm working with:


Lenovo B570 - B Series Laptop
Serial Number:WB06182752
Machine Type Model:1068BAU
OS:Windows 7 Home Premium x64
Processor: Intel Huron River SV

Core Chipset: Intel HM65

CMOS RAM: 256bytes

HDD: 2.5" SATA 320gb (5400rpm)




Laptop is stuck in a boot loop which ends at a blank black screen , and picks up where at the very top it says "WINDOWS ERROR RECOVERY"

I cannot access bios settings.
I cannot access safe mode.
I cannot access command prompt.


PC will boot up to the "STARTING WINDOWS" screen, Windows logo loads , goes to a blank black screen with the pointer for maybe 5 seconds roughly,then the backlight dims for maybe 5 seconds, and loops back to initial boot screen showing options to for bios F2 and F12.


No repair or recovery options are ever listed or shown, none of the safe modes work, last known good config does not work, and it does not want to boot by USB or CD/DVD


I have tried creating bootable USB using ISO files, such as: BartPE, UBCD4WIN, HBCD PE, HBCD 15.1, Linux Mint Mate14, Windows 7 Home Premium x64 Installation Disc (created using iso)


Last night, I found some blank cds and dvds, so i burned a windows 7 home premium 64bit bootable iso to a dvd using WinISO. It burned successfully, as i tried it on the PC i'm currently using and booted perfectly fine, (i've been testing the flash drives on this pc before i try them on the lenovo to ensure they're in working order)

In a nut shell, it's not getting past the Kernel loading phase.

Any help is greatly appreciated!




Attached Thumbnails
BSOD Windows Error Recovery Boot Loop-2020-03-06_13_40_17.jpg   BSOD Windows Error Recovery Boot Loop-2020-03-06_13_40_29.jpg   BSOD Windows Error Recovery Boot Loop-2020-03-06_13_40_48.jpg   BSOD Windows Error Recovery Boot Loop-2020-03-06_13_41_14.jpg   BSOD Windows Error Recovery Boot Loop-2020-03-06_13_41_19.jpg  

BSOD Windows Error Recovery Boot Loop-2020-03-06_13_43_08.jpg   BSOD Windows Error Recovery Boot Loop-2020-03-06_13_43_31.jpg  
My System SpecsSystem Spec
.
3 Weeks Ago   #2
torchwood

W7 home premium 32bit/W7HP 64bit/w10 tp insider ring
 
 

Hi

Interesting, thats not the usual place it falls over -

Can you try booting from Dissable driver signature enforcement option


from what i can find the driver relates to Aoemi back-up
if thats the case can you could try using the last image you created.


Roy
My System SpecsSystem Spec
3 Weeks Ago   #3
anothertwenty4

Windows 7 Home Premium x64
 
 

Good morning Roy, thank you for showing interest.

You are correct when you mention aomei. I had recently put both aomei and macrium on both laptops. However, Im not seeing an image for the Lenovo. I'm going to try booting from disable driver signature and see what that results.

Also, I had just recently done a reinstall of win7 on the Lenovo, so im not worried about any data or programs.

With that being said, (pardon me if something I say doesn't make sense. I've been learning about all this just over the last few weeks) I have been trying to create bootable media that would boot into MSDOS or free dos, since this Lenovo (based on the product manual) came with free dos pre-installed, seemingly. Am I wasting my time with that

That's where I'm at.
My System SpecsSystem Spec
.

3 Weeks Ago   #4
anothertwenty4

Windows 7 Home Premium x64
 
 

I'm trying to get it to the right screen to select THE DISABLE DRIVER SIGNATURE ENFORCEMENT option
My System SpecsSystem Spec
3 Weeks Ago   #5
anothertwenty4

Windows 7 Home Premium x64
 
 

Once I was able to select that option, it goes to the "starting windows" with logo, followed by black screen with pointer, and back to "windows error recovery" page, back in the loop.

I have it sitting on the ADVANCED BOOT OPTIONS screen right now.
My System SpecsSystem Spec
3 Weeks Ago   #6
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

If you are not able to get into bios, deatch all peripherals ( including the hard disk) and use a process of elimination to figure what is stopping bios access.



Windows 7 Home Premium x64 Installation Disc (created using iso)

Boot from the installtion disc. Select "repair my computer".

Use cmd prompt, type
regedit
load the system hive from your windows\system32\config folder

If you name the loaded hive SYS

delete upperfilter ambakdrv from

HKEY_LOCAL_MACHINE\SYS\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}
and if it exists
HKEY_LOCAL_MACHINE\SYS\ControlSet002\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}

also set start type to 4 in

HKEY_LOCAL_MACHINE\SYS\ControlSet001\services\ambakdrv
and if it exists
HKEY_LOCAL_MACHINE\SYS\ControlSet002\services\ambakdrv


These pics help indicate what you are looking for. But of course you look in the hive you have just loaded.

BSOD Windows Error Recovery Boot Loop-ambakdrv1.jpg

BSOD Windows Error Recovery Boot Loop-ambakdrv2.jpg


My System SpecsSystem Spec
3 Weeks Ago   #7
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

Alternatively, use the installation boot media to do system restore to a point before you had the problem.
My System SpecsSystem Spec
.
3 Weeks Ago   #8
anothertwenty4

Windows 7 Home Premium x64
 
 

I have removed peripherals and the hdd, powered on, and has landed me on bios password screen. This password was set before I bought the laptop.
My System SpecsSystem Spec
3 Weeks Ago   #9
anothertwenty4

Windows 7 Home Premium x64
 
 

I put the win7 setup dvd in and it has actually booted. Hdd is still removed. Now, would it beneficial to do a clean install instead of restore
My System SpecsSystem Spec
3 Weeks Ago   #10
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

Nothing wrong with a clean install. Do you have another HD that doesn't cause issues getting into bios?
My System SpecsSystem Spec
Reply

 BSOD Windows Error Recovery Boot Loop




Thread Tools




Similar help and support threads
Thread Forum
Window 7 Professional 32bit - Windows Error Recovery Endless Loop
hi there, good day to all of you. tried all the steps from your tutorial (Startup Repair Infinite Loop Recovery - Windows 7 Help Forums) sadly none of them fixed my problem. looking forward for any instruction that might help, thanks Windows 7 Professional 32 bit. HP Desktop.
General Discussion
BSOD error 0x0000007F / Infinite Boot Loop
Hello, Within the past couple days, my PC has stopped booting to Windows 7 Home Premium (64 bit). It will either freeze on the Windows logo just before the desktop or shown or it will crash as soon as the desktop/cursor appears and gives a BSOD error 0x0000007F. I'm able to boot to safe mode...
BSOD Help and Support
Windows Error Recovery Loop, BSoD after Disable Automatic Restart
Hi everyone, Newbie here so hope I posted this in the right section. I am not able to boot up my laptop at all so I cannot do the DM Log Collector, sorry! I own an ASUS R500A laptop that seemed to have crashed for no reason yesterday. I was using it, went afk for a few hours, came back and...
BSOD Help and Support
Re: Windows 7 System Recovery Loop Error
Greetings: 1st, not sure if I have posted in the right section, moderator please feel free to move. My computer froze during an update, upon restarting the computer I now I have a endless loop error. :*** A black screen appears with the following message. "Windows failed to start. A recent...
Backup and Restore
bosd and windows error recovery screen loop
I did a restore point a week back from when my laptop was acting up..since then Ive been getting the bsod then switches to the windows error recovery screen in a loop..now..I cant launch startup repair (it loops back to the error recovery screen) and start windows normally will load but then loops...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:37.
Twitter Facebook