Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: The location of startup repair log files

17 Apr 2020   #1
jraju

windows 7 ultimate 32 bit
 
 
The location of startup repair log files

Hi, I was prompted to opt for startup repair and it repaired and booted to normal windows.I received a warning that system recovered from serious error. Now the pc is running. Where is the log file? Could I see which caused the bsod?
My System SpecsSystem Spec
.
17 Apr 2020   #2
iko22

Windows 7 x64, Vista x64, 8.1 smartphone
 
 

Hi

The BSOD log files are located in C:\Windows\Minidump, and there maybe another file in C:\Windows

The Startup reapir log file is at
C:\Windows\System32\Logfiles\Srt\SrtTrail.txt

Hope that helps.
My System SpecsSystem Spec
17 Apr 2020   #3
Snick

Win 10 x64, Linux Lite, Win 7 x64, BlackArch, & Kali
 
 

TXT extensions can be opened with Notepad, Wordpad, Word or any text editor.
I prefer Notepad++

My System SpecsSystem Spec
.

19 Apr 2020   #4
jraju

windows 7 ultimate 32 bit
 
 

Hi, Iko, thank you very much for giving me the location.
i furnish below the contents of the log file
i could see the error as bugcheck.......
and it has been fixed.
1. Has the error been fixed by SR point, that i was asked to choose while running start up repair or the system was restored with the startup repairs
2. what is bugcheck error, and why there was no detailed error report, instead of something like 0x0 ....ect.
3. What is the other log files in c: winodws, and what it is named
4. can i open the mini dump files to see what the error is , for bsod
5. why there was an alert that the system has been recovered from serious error and it further prompts for some solution tabs.
i just ignored it, as aslready , the system itself has prompted system repair screen.
8. Since my system was restored with 0x0, could i take that i need not do any further check , or should i opt chkdsk and sfc scannow options
expecting a detailed point by point reply from you , sir,
Startup Repair diagnosis and repair log
---------------------------
Last successful boot time: ‎3/‎30/‎2020 3:50:16 AM (GMT)
Number of repair attempts: 1

Session details
---------------------------
System Disk = \Device\Harddisk0
Windows directory = D:\Windows
AutoChk Run = 0
Number of root causes = 1

Test Performed:
---------------------------
Name: Check for updates
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms

Test Performed:
---------------------------
Name: System disk test
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms

Test Performed:
---------------------------
Name: Disk failure diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 359 ms

Test Performed:
---------------------------
Name: Disk metadata test
Result: Completed successfully. Error code = 0x0
Time taken = 47 ms

Test Performed:
---------------------------
Name: Target OS test
Result: Completed successfully. Error code = 0x0
Time taken = 141 ms

Test Performed:
---------------------------
Name: Volume content check
Result: Completed successfully. Error code = 0x0
Time taken = 125 ms

Test Performed:
---------------------------
Name: Boot manager diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms

Test Performed:
---------------------------
Name: System boot log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms

Test Performed:
---------------------------
Name: Event log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 234 ms

Test Performed:
---------------------------
Name: Internal state check
Result: Completed successfully. Error code = 0x0
Time taken = 16 ms

Test Performed:
---------------------------
Name: Boot status test
Result: Completed successfully. Error code = 0x0
Time taken = 16 ms

Test Performed:
---------------------------
Name: Setup state check
Result: Completed successfully. Error code = 0x0
Time taken = 312 ms

Test Performed:
---------------------------
Name: Registry hives test
Result: Completed successfully. Error code = 0x0
Time taken = 2453 ms

Test Performed:
---------------------------
Name: Windows boot log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms

Test Performed:
---------------------------
Name: Bugcheck analysis
Result: Completed successfully. Error code = 0x0
Time taken = 641 ms

Root cause found:
---------------------------
Unknown Bugcheck: Bugcheck 3b. Parameters = 0xc0000005, 0xfffff80002e3267e, 0xfffff88002aef940, 0x0.

Repair action: System Restore
Result: Completed successfully. Error code = 0x0
Time taken = 1154953 ms

---------------------------
---------------------------
Here are the logs
My System SpecsSystem Spec
19 Apr 2020   #5
iko22

Windows 7 x64, Vista x64, 8.1 smartphone
 
 

bugcheck is another name for BSOD. Or, at least a bugcheck happens after a BSOD. Bugcheck includes details suitable for programmers.

Your computer's bugcheck suggests that a System Restore was completed as a result.

You can check your own BSODs with BlueScreenView | NirSoft
My System SpecsSystem Spec
19 Apr 2020   #6
jraju

windows 7 ultimate 32 bit
 
 

what went wrong with the system is the one , i want to know.
Normally system restore alert oks, immediatelly responds with immediate boot with restore points in a minute or two.
But it took almost half an hour to finish.
can i see what went wrong with nirsoft softeare
My System SpecsSystem Spec
Reply

Thread Tools




Similar help and support threads
Thread Forum
Stuck on Startup Repair Loop (Windows is Loading Files ; no safe mode)
Hi guys, I'm having an issue with my system that I hope someone will be able to help me with. Basically I am stuck on a 'Startup Repair' loop. I am running Windows 7 64bit and did not have any startup / booting issues up until a few days ago. When I was last using my system it was...
General Discussion
sfc and startup repair found corrupted files but can't fix
Win 7 starts ok but sfc reports corrupted files Cbs Log attached. Any advice will be appreciated
Performance & Maintenance
Startup repair - system files integrity check failed
Yesterday my Windows 7 machine crashed a couple times - the first time the screen just went black, and the second time it looked like a video driver problem. There was no BSOD either time, I had to do a hard power off and then restart. When I started up the computer after the second crash,...
Performance & Maintenance
windows 7 startup repair delete my personal files
Hi dear, I am windows 7 home premium user with 1 Tb hard disk (1 partition). Earlier day, while my pc was shutting down. Unfortunately I disconnect the electricity line. So my pc couldn't shut down correctly. After 2 hours, I was trying to start my pc. But after boot screen a message was shown...
General Discussion
Need Partition help? Startup repair says no OS files found on disk.
After running startup repair, the details state the root cause to be "No OS files found on disk. Repair action: Partition table repair. Result: Failed. Error code = 0x3f8" I have Partition Wizard and have a funny feeling that might help, but I'm not 100% sure how to use that software for this...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 05:08.
Twitter Facebook