Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: How change from "IDE" to RAID (clone) without BOSD

5 Days Ago   #1

Windows 7 Ultimate x64
How change from "IDE" to RAID (clone) without BOSD

Hi, thanks for your kind support,
to improve the safety of my server I would like to use RAID1 (present on board), today I made the clone but I realized it cannt boot. I need so the driver for RAID, but how can I install it? Actually only Mini WinXP boot from flash (mini win10 frozen as soon it finished to load files from USB to RAM) and I probably need to use it to edit some files in the RAID clone, maybe add the driver, maybe change something somewhere, maybe registries.. but how can I edit those registries?
Do you have ideas? Thank you!
My System SpecsSystem Spec
5 Days Ago   #2

Windows 7 Ultimate x64

Here I've found the driver for boot, if I install them using the .msi file when the PC is booted into "IDE" mode, will it install if there aren't RAID devices present? (if I enable the controller in RAID I have BOSD into startup) And will it be enough to boot nest time with the RAID cloned copy?
ASRock > A75M-HVS
My System SpecsSystem Spec
5 Days Ago   #3

Windows 7 x64, Vista x64, 8.1 smartphone

Hello GiovanniG,

I understand you want to install RAID drivers onto your installation. Does the answers in this thread How to install RAID drivers on already installed Windows 7? | Super User help you?
My System SpecsSystem Spec

4 Days Ago   #4

Windows 7 Ultimate x64

Thank you for your kind answer, I cloned to raid already and I don't want to use original disk for experiments, if I boot with mini winxp and I use inf2reg tool (and manually copy files to win folders) do you think it's possible it will boot in raid? Thanks
My System SpecsSystem Spec
4 Days Ago   #5

Windows 7 x64, Vista x64, 8.1 smartphone

I do not think that will work. I'll tell you why. It is not just a matter of installing the correct drivers. You also need to "tell" the registry that you are using RAID/AHCI drivers, instead of using IDE drivers. Windows registry uses this information to speed up the boot, at start-up. The change to the registry is a manual "experiment" if you are the nervous kind, otherwise, if you are feeling confident, it is a straight forward change - I will not pursued you.

This procedure is all explained in the web link I provided. If you want to double check, then here are a couple more links with the same procedure:
How to change from IDE/AHCI to AHCI/RAID *without* reinstalling windows
How to Change SATA HDD Mode from IDE to AHCI / RAID in BIOS after Installing Windows
My System SpecsSystem Spec

Thread Tools

Similar help and support threads
Thread Forum
Changing windows boot drive sata config from "raid" to "ahci"
So I have an AMD A88X motherboard in my htpc. For a few reasons I want to change the bios config for the sata controller from RAID to AHCI. I followed the instructions in this article: to have windows load the ahci driver, but now I can't...
"Local Area Connection" missing in "Change adapter Settings".. Plz hlp
I have to set up a Broadband connection. But Local Area connection icon is missing. Someone told "drivers" could be missing... I installed few. But the problem is as it was.. please guide me in this regards.. Thank you Screen shots Attached
Network & Sharing
Help with Software Raid: Raid over file system "FlexRAID"
Hello Gurus Finally coming back here as i cant get help anywhere else for past 3 or 4 days i am trying to get a software raid to work but it is not happing and i am not getting anywhere. What i am trying to do: Simple i am trying to setup a Software Raid over file system with paid...
Change font of "Welcome", "Logging Off" and "Shutting down"?
How do I change the font of "Welcome", "Logging Off" and "Shutting down"? Is it hard coded in a uifile? Which file are the words in? Is the file written in XML?? John
change start menu icons "devices and printers" and "recorded tv"
Hello Ive managed to change all the icons on my system to custom ones apart from devices and printers and recorded tv on the right of the start menu.(the ones that appear over your user picture when you hover over them) Ive searched everywhere for their location in the registry but cant find them...

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 05:23.
Twitter Facebook