booted up to BSOD after computer logo

I don't know if anyone uses W7 or monitors this forum but today I turned on my computer and immediately after showing laptop manufacturer name it was BSOD. It continued to start up perfectly fine - not a restart, just continued with startup after a few seconds.



This is after a few days ago my computer started up and I got a message saying: Windows has recovered from an unexpected shutdown... but it shut down perfectly fine before that. It said the problem is BlueScreen (image attached). I immediately did chkdsk /f /r /x and no issues.


W7 is old but have not had issues before this week. I haven't made a single change or update to any hardware or softwareand scans show no malware. ANY help would be appreciated! Thanks.

What did the blue screen say? We need additional information. See this: Blue Screen of Death (BSOD) Posting Instructions

I apologize. I didn't see your attached file. I didn't find much in it. From what I can see Windows is finding file system corruption:

Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dumps are enabled on your computer. This system is not configured for complete or automatic crash dumps. For best results, configure your system to write out complete or automatic crash dumps. Select Tools->Crash Dump Configuration from the main menu to configure your system to write out complete memory dumps.

Crash dump directories:
MEESH-PC-Fri_07_12_2024_192800_50

On Thu 7/4/2024 3:54:45 PM your computer crashed or a problem was reported

Crash dump file: \MEESH-PC-Fri_07_12_2024_192800_50\070424-25100-01.dmp (Minidump)
Bugcheck code: 0x24(0x1904FB, 0xFFFFF880041A3468, 0xFFFFF880041A2CD0, 0xFFFFF88002639419)
Bugcheck name: NTFS_FILE_SYSTEM
Driver or module in which error occurred: Ntfs.sys (Ntfs+0x4261)
File path: C:\Windows\System32\Drivers\Ntfs.sys
Description: NT File System Driver
Product: Microsoft® Windows® Operating System
Company: Microsoft Corporation
Bug check description: This indicates a problem occurred in the NTFS file system.
Analysis: This bugcheck indicates that the error is file system or disk related. If no offending driver is found, it is suggested that you run CHKDSK to check your drive(s) for errors. The crash took place in a file system driver. Since there is no other responsible driver detected, this could be pointing to a malfunctioning drive or corrupted disk. It's suggested that you run CHKDSK to check your drive(s) for errors.




On Wed 7/3/2024 9:25:52 AM your computer crashed or a problem was reported

Crash dump file: \MEESH-PC-Fri_07_12_2024_192800_50\070324-18111-01.dmp (Minidump)
Bugcheck code: 0x24(0x1904FB, 0xFFFFF880041AA468, 0xFFFFF880041A9CD0, 0xFFFFF88002618419)
Bugcheck name: NTFS_FILE_SYSTEM
Driver or module in which error occurred: Ntfs.sys (Ntfs+0x4261)
File path: C:\Windows\System32\Drivers\Ntfs.sys
Description: NT File System Driver
Product: Microsoft® Windows® Operating System
Company: Microsoft Corporation
Bug check description: This indicates a problem occurred in the NTFS file system.
Analysis: This bugcheck indicates that the error is file system or disk related. If no offending driver is found, it is suggested that you run CHKDSK to check your drive(s) for errors. The crash took place in a file system driver. Since there is no other responsible driver detected, this could be pointing to a malfunctioning drive or corrupted disk. It's suggested that you run CHKDSK to check your drive(s) for errors.

If you tried chkdsk then right click on command prompt from your start menu and select run as administrator. Then type the following into the black box followed by enter.

sfc /scannow

Let it run. It could take a few hours. Also you should download hard drive diagnostic tools from your hard drive's manufacturer and scan your hard drive using the long tests. That will also take a few hours.

Hello,

Last week I did both CHKDSK and scannow.. yesterday my computer booted up to CHKDSK because I had requested one on the next startup. Everything started fine but when powering off it hung on the shutting down screen & I had to force shutdown with power button (but it started up fine the next time).

I just did scannow as admin. Took less than 30 mins. and said did not find any integrity violations.

Unfortunately, the only diagnostics tool I have already installed from the manufacturer (Lenovo) is a 'lite' version & it has always said everything is fine and only does short tests of things. I tried to downloaded a diff./updated diagnostic tool from their site but when I try to run it I get an error saying it was unable to start correctly - even though it said it was compatible for W7 I suspect it's not.

I appreciate any ideas or help you can give.

- - - Updated - - -

My computer shut down perfectly yesterday but today it won't turn on!! Right after the logo and welcome I got BSOD but this time it didn't start up.. it went back to logo and back to BSOD over and over.. I forced shutdown and went to F10 and am running manufacture diagnostic. It's passing everything. I don't know why this is happening suddenly (I made no changes).

I said the hard drive's manufacturer not the computer's manufacturer. It'll be made by seagate, western digital, toshiba, hitachi, etc. They will have bootable disks with long tests. You can try seatools but I don't know if it'll run if the drive isn't a seagate. SeaTools | Support Seagate US Whatever you use run the long tests. BTW I strongly suggest that you backup your important documents.

Sorry.. I misunderstood. My hard drive is WD. I was posting from my phone because it wouldn't boot up.. After the diagnostic it started and I never turned it off. Event viewer says: The driver detected a controller error on \Device\Harddisk2\DR5.

I tried to download the most recent WD testing software but I don't think W7 is supported. I think I'm using an older one. I'm running the only test now - I hope it's the right one.

- - - Updated - - -

I ran 'extended' test it said everything was fine. I don't think it was a proper long test... also, CrystalDiskInfo and HDDScan also say everything is normal..
'Not sure if this is helpful (I didn't see a txt file from the WD test):

----------------------------------------------------------------------------
CrystalDiskInfo 9.3.2 (C) 2008-2024 hiyohiyo
Crystal Dew World: Crystal Dew World [en] -
----------------------------------------------------------------------------

OS : Windows 7 Professional [6.1 Build 7601] (x64)
Date : 2024/07/16 10:59:23

-- Controller Map ----------------------------------------------------------
+ Intel(R) 6th Generation Core Processor Family Platform I/O SATA AHCI Controller [ATA]
- WDC WD5000LPLX-08ZNT SCSI Disk Device
- HL-DT-ST DVDRAM GUE0N SCSI CdRom Device
- BayHubTech Integrated MMC/SD controller [SCSI]

-- Disk List ---------------------------------------------------------------
(01) WDC WD5000LPLX-08ZNTT0 : 500.1 GB [0/0/0, pd1]

----------------------------------------------------------------------------
(01) WDC WD5000LPLX-08ZNTT0
----------------------------------------------------------------------------
Model : WDC WD5000LPLX-08ZNTT0
Firmware : 05.01A05
Serial Number : WD-WXK1A475JPJP
Disk Size : 500.1 GB (8.4/137.4/500.1/----)
Buffer Size : 32767 KB
Queue Depth : 32
# of Sectors : 976773168
Rotation Rate : 7200 RPM
Interface : Serial ATA
Major Version : ACS-2
Minor Version : ACS-3 Revision 3b
Transfer Mode : SATA/600 | SATA/600
Power On Hours : 22310 hours
Power On Count : 4235 count
Temperature : 36 C (96 F)
Health Status : Good
Features : S.M.A.R.T., APM, NCQ, GPL
APM Level : 0060h [ON]
AAM Level : ----
Drive Letter : C:

-- S.M.A.R.T. --------------------------------------------------------------
ID Cur Wor Thr RawValues(6) Attribute Name
01 200 200 _51 000000000000 Read Error Rate
03 144 142 _21 000000000708 Spin-Up Time
04 _46 _46 __0 00000000D313 Start/Stop Count
05 200 200 140 000000000000 Reallocated Sectors Count
07 200 200 _51 000000000000 Seek Error Rate
09 _70 _70 __0 000000005726 Power-On Hours
0A 100 100 __0 000000000000 Spin Retry Count
0B 100 100 __0 000000000000 Recalibration Retries
0C _96 _96 __0 00000000108B Power Cycle Count
C0 200 200 __0 00000000004D Power-off Retract Count
C1 134 134 __0 0000000307AB Load/Unload Cycle Count
C2 107 _83 __0 000000000024 Temperature
C4 200 200 __0 000000000000 Reallocation Event Count
C5 200 200 __0 000000000000 Current Pending Sector Count
C6 100 253 __0 000000000000 Uncorrectable Sector Count
C7 200 200 __0 000000000000 UltraDMA CRC Error Count
C8 200 200 __0 000000000000 Write Error Rate
F0 _71 _71 __0 00000000554E Head Flying Hours

-- IDENTIFY_DEVICE ---------------------------------------------------------
0 1 2 3 4 5 6 7 8 9
000: 427A 3FFF C837 0010 0000 0000 003F 0000 0000 0000
010: 2020 2020 2057 442D 5758 4B31 4134 3735 4A50 4A50
020: 0000 FFFF 0000 3035 2E30 3141 3035 5744 4320 5744
030: 3530 3030 4C50 4C58 2D30 385A 4E54 5430 2020 2020
040: 2020 2020 2020 2020 2020 2020 2020 8010 4000 2F00
050: 4000 0000 0000 0007 3FFF 0010 003F FC10 00FB 0110
060: FFFF 0FFF 0000 0007 0003 0078 0078 0078 0078 0D00
070: 0000 0000 0000 0000 0000 001F 9D0E 0006 004C 004C
080: 03FE 001F 346B 7D09 6123 3469 BC09 6123 407F 0024
090: 0024 0060 FFFE 0000 0000 0000 0000 0000 0000 0000
100: 6030 3A38 0000 0000 0000 0000 6003 0000 5001 4EE6
110: B246 24BE 0000 0000 0000 0000 0000 0000 0000 401C
120: 401C 0000 0000 0000 0000 0000 0000 0000 0029 0400
130: 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000
140: 0000 0000 0004 0000 0000 0000 0000 0000 0000 0000
150: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
160: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
170: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
180: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
190: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
200: 0000 0000 0000 0000 0000 0000 3035 0000 0000 4000
210: 0000 0000 0000 0000 0000 0000 0000 1C20 0000 0000
220: 0000 0000 107E 0000 0000 0000 0000 0000 0000 0000
230: 0000 0000 0000 0000 0001 1000 0000 0000 0000 0000
240: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
250: 0000 0000 0000 0000 0000 49A5

-- SMART_READ_DATA ---------------------------------------------------------
+0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +A +B +C +D +E +F
000: 10 00 01 2F 00 C8 C8 00 00 00 00 00 00 00 03 27
010: 00 90 8E 08 07 00 00 00 00 00 04 32 00 2E 2E 13
020: D3 00 00 00 00 00 05 33 00 C8 C8 00 00 00 00 00
030: 00 00 07 2F 00 C8 C8 00 00 00 00 00 00 00 09 32
040: 00 46 46 26 57 00 00 00 00 00 0A 32 00 64 64 00
050: 00 00 00 00 00 00 0B 32 00 64 64 00 00 00 00 00
060: 00 00 0C 32 00 60 60 8B 10 00 00 00 00 00 C0 32
070: 00 C8 C8 4D 00 00 00 00 00 00 C1 32 00 86 86 AB
080: 07 03 00 00 00 00 C2 22 00 6B 53 24 00 00 00 00
090: 00 00 C4 32 00 C8 C8 00 00 00 00 00 00 00 C5 32
0A0: 00 C8 C8 00 00 00 00 00 00 00 C6 30 00 64 FD 00
0B0: 00 00 00 00 00 00 C7 32 00 C8 C8 00 00 00 00 00
0C0: 00 00 C8 08 00 C8 C8 00 00 00 00 00 00 00 F0 32
0D0: 00 47 47 4E 55 00 00 00 00 00 00 00 00 00 00 00
0E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160: 00 00 00 00 00 00 00 00 00 00 00 00 7C 1A 01 7B
170: 03 00 01 00 02 50 05 00 00 00 00 00 00 00 00 00
180: 00 00 01 02 00 00 00 00 00 00 00 00 00 00 00 00
190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 94

-- SMART_READ_THRESHOLD ----------------------------------------------------
+0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +A +B +C +D +E +F
000: 10 00 01 33 C8 C8 00 00 00 00 00 00 00 00 03 15
010: 00 00 00 00 00 00 00 00 00 00 04 00 00 00 00 00
020: 00 00 00 00 00 00 05 8C 00 00 00 00 00 00 00 00
030: 00 00 07 33 C8 C8 00 00 00 00 00 00 00 00 09 00
040: 00 00 00 00 00 00 00 00 00 00 0A 00 00 00 00 00
050: 00 00 00 00 00 00 0B 00 00 00 00 00 00 00 00 00
060: 00 00 0C 00 00 00 00 00 00 00 00 00 00 00 C0 00
070: 00 00 00 00 00 00 00 00 00 00 C1 00 00 00 00 00
080: 00 00 00 00 00 00 C2 00 00 00 00 00 00 00 00 00
090: 00 00 C4 00 00 00 00 00 00 00 00 00 00 00 C5 00
0A0: 00 00 00 00 00 00 00 00 00 00 C6 00 00 00 00 00
0B0: 00 00 00 00 00 00 C7 00 00 00 00 00 00 00 00 00
0C0: 00 00 C8 00 C8 C8 00 00 00 00 00 00 00 00 F0 00
0D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EA

You can't accurately and sufficiently scan and fix hard drive issues while Windows is running since part of the drive is in use. You need WD's bootable tools to be able to scan the entire hard drive. Go here: Western Digital Repair Tool | Repair WD hard drive for Windows 11, 10 Try this section:
Step 1. Create a Windows PE bootable drive

If that doesn't work sea tools has the same thing. I provided the link.

I'm sorry that I missed this. Running hard drive scans in windows is just about pointless because windows is using the drive no matter what the software is. I referred you to using diagnostic tools that you either create on a cd or put on a usb drive and boot into without running windows. Then the drive isn't in use and you can get an adequate scan. Until you've done that you haven't adequately scanned the hard drive for issues. Try this specifically: https://www.seagate.com/content/dam/...lsBootable.zip