Hey guys ,

A little update so my ram came clean after hours of test no errors or ecc errors have been found so I can safely say that my ram is 100% clean.
And after Memtest, got the "insert disk system and press enter " 4 times , until I completly turned off the psu , rebooted again and it was fine , I have to test my hard drive with WinDlg ( Western Digital tool ) to see if there is something wrong on the hard drive side , all the smart value looks clean , no reallocated sector count ( bad sectors ) but there could be some mechanical wear , it's a 10K rpm hard drive that is 10+ years old running 24/7 , if the hard drive come clean after the test I'll be short of ideas guy or I'll need someone that can go deeper with the debug file with advanced command.