help in bsod crashes in windows 7

have you tried removing AVG?? In your dump it shows avgtdia.sys
Seems strange thought that you have so many memory errors but no issue with your memory.

What is your full system specs

thanks

Always completely uninstall AVG. AVG is worse than a virus, seriously.

hm.. i ran memtest again just for kicks now its barfing all over the place.. let me get some new memory and retest this thing.. growl.....

palidanx said:

hm.. i ran memtest again just for kicks now its barfing all over the place.. let me get some new memory and retest this thing.. growl.....

trust me friend I had the same issue, RMA it and once you get it we can see if your RAM voltage settings are too high or correct. Let me know once you have spares :)

If you can give me your full specs that would be great, thanks

SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
its being caused by: ntoskrnl.exe

Check if you are using the latest hardware drivers, especially the chipset and video drivers. Older drivers are a common contributor to BSoD issues.

Just wanted to provide an update. I got some cheapy crucial ram temporarily to see what was going on, and so far no bsod for a couple of days (albeit the system is slow). I ordered some gskill memory and it should be coming in today so hopefully is good *crosses fingers*

My computer is starting to barf again.. is this pointing to general memory issues (installed 4gig gskill ram)

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000008884, The subtype of the bugcheck.
Arg2: fffffa800242e7d0
Arg3: fffffa8001fa8800
Arg4: 0000000000000504

Debugging Details:
------------------


BUGCHECK_STR: 0x1a_8884

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP

PROCESS_NAME: svchost.exe

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from fffff80002b7fdf6 to fffff80002ad2f00

STACK_TEXT:
fffff880`060ab8b8 fffff800`02b7fdf6 : 00000000`0000001a 00000000`00008884 fffffa80`0242e7d0 fffffa80`01fa8800 : nt!KeBugCheckEx
fffff880`060ab8c0 fffff800`02bde5f5 : fffffa80`04763438 fffffa80`04764000 00000000`00000000 00000000`00000000 : nt!MiRelinkStandbyPage+0xc6
fffff880`060ab930 fffff800`02ee4064 : fffffa80`04762000 fffff880`060abca0 fffff880`060aba08 00000000`000cff01 : nt!MmSetPfnListPriorities+0x175
fffff880`060ab980 fffff800`02f44d7a : 00000000`00000020 00000000`00000000 fffffa80`04762000 00000000`00000001 : nt!PfpPfnPrioRequest+0x84
fffff880`060ab9d0 fffff800`02f494be : 00000000`00000000 00000000`01a4b490 00000000`0000004f 00000000`00000001 : nt!PfSetSuperfetchInformation+0x199
fffff880`060abab0 fffff800`02ad2153 : fffffa80`065d5b60 00000000`03065f28 00000000`00000000 00000000`0307ef30 : nt!NtSetSystemInformation+0xb91
fffff880`060abc20 00000000`779515aa : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`01a4b418 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x779515aa


STACK_COMMAND: kb

FOLLOWUP_IP:
nt!MiRelinkStandbyPage+c6
fffff800`02b7fdf6 cc int 3

SYMBOL_STACK_INDEX: 1

SYMBOL_NAME: nt!MiRelinkStandbyPage+c6

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bc600

IMAGE_NAME: memory_corruption

FAILURE_BUCKET_ID: X64_0x1a_8884_VRF_nt!MiRelinkStandbyPage+c6

BUCKET_ID: X64_0x1a_8884_VRF_nt!MiRelinkStandbyPage+c6

Followup: MachineOwner
---------

In addition to setting cas settings, do i need to bump up my NB voltage?

Post the actual .dmp in a rar attached to a post.

Hey guys,

I just ran memtest x86 on my new gskill ram last night and I set it to

5-5-5-15, pc1066 2.02v

I noticed thought when reading memtest it said the settings were

8-5-5-15

is There any reason the cl is off?

Thanks

palidanx said:

Hey guys,

I just ran memtest x86 on my new gskill ram last night and I set it to

5-5-5-15, pc1066 2.02v

I noticed thought when reading memtest it said the settings were

8-5-5-15

is There any reason the cl is off?

Thanks

Not sure why memtest would read it that way but I would trust your BIOS settings and CPU-Z. Mine is set to 5-5-5-15 and it reads it correctly in CPU-z.