Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 6 BSOD in one day

12 Dec 2009   #11
usasma
Microsoft MVP

 
 

Please check to see if all the RAM is bad - or if it's the slots that are bad.
The steps after Step 6 in this post will help do that: Memory Diagnostics

Once you've figured out what's bad and what's good - replace/remove the bad stuff and see if that fixes the BSOD's.


My System SpecsSystem Spec
.
12 Dec 2009   #12
Spyrofly

Windows 7
 
 

well i have tested it with that memtest

suprisingly i only get errors while they are all inserted

but when tested seperatly no errors
My System SpecsSystem Spec
13 Dec 2009   #13
sotorious

windows 7 professional 64 bit
 
 

you should let the ram go about 3 to 5 passes each, and if the all pass in 1 slot move to the next slot... so you can narrow it down, whether it is the ram or the dimm slot. i know it sounds like a pain, and it is cause i just went threw hell testing ram but, better to buy the right thing when you go out purchasing.
My System SpecsSystem Spec
.

13 Dec 2009   #14
Spyrofly

Windows 7
 
 

ok i will try ASAP
My System SpecsSystem Spec
13 Dec 2009   #15
Geo64

Win7
 
 

Raise the Vdimm (RAM voltage) slightly in the bios and it will be good with all sticks in. Better, visit OCZ's site and find the exact Vdimm and timings for your specific modules then enter manually in bios. OCZ always needs higher Vdimm.

Start trying with 2.0v Vdimm and go higher up to 2.2v until it is stable.

http://www.ocztechnology.com/product...2_dual_channel

You are also getting 0x3b errors, so please uninstall your antivirus also, to test. Disabling only, will not help here.
My System SpecsSystem Spec
13 Dec 2009   #16
smarteyeball

 
 

Quote   Quote: Originally Posted by Spyrofly View Post
well i have tested it with that memtest

surprisingly i only get errors while they are all inserted
You may also have to raise your NorthBridge voltage (MCH) a notch or two since all four 4 dimm slots are filled.
My System SpecsSystem Spec
Reply

 6 BSOD in one day




Thread Tools



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:35.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App