Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Hello Again with another BSOD

13 Dec 2009   #1
Gwindor

Windows Vista Ultimate , Windows 7 Ultimate
 
 
Hello Again with another BSOD

Back again with another anoying BSOD. Can anyone tell me what is the prob this time? I think that my memory has probs but can anyone debug and tell me if i m right?

Thank U all!

I m sending the three latest minidump files. thx.


My System SpecsSystem Spec
.
13 Dec 2009   #2
Geo64

Win7
 
 

Hello and welcome to here.

Visit OCZ's website for the correct Vdimm and timings for your ram modules. Then adjust your bios manually for that.

While testing, completely uninstall your antivirus and firewalls to test. Disabling will not help.

Please update this driver:

Code:
pcouffin pcouffin.sys Tue Dec 05 09:39:53 2006
And this driver is ancient! Please update it or uninstall it from the system:

Code:
giveio   giveio.sys   Wed Apr 03 22:33:25 1996
Uninstall speedfan or update it too:

Code:
 speedfan speedfan.sys Sun Sep 24 09:28:47 2006
My System SpecsSystem Spec
13 Dec 2009   #3
Gwindor

Windows Vista Ultimate , Windows 7 Ultimate
 
 

I have remove speedfan but another BSOD hapens. Here is the new file. If anyone can debug i will apreciate.
My System SpecsSystem Spec
.

13 Dec 2009   #4
Geo64

Win7
 
 

Same advice as my last post, minus speedfan.

Only this time, adding these drivers as well. Update your network driver by visiting Realtek's site too.

Code:
Rt86win7 Rt86win7.sys Fri May 22 10:52:05 2009
adfs     adfs.SYS     Thu Aug 14 10:57:15 2008
I noticed you have Avast installed. I'd uninstall that too, to test, while updating all the drivers shown. Once everything is updated, install Avast again to see if that was the issue - as that in itself could be.
My System SpecsSystem Spec
13 Dec 2009   #5
Gwindor

Windows Vista Ultimate , Windows 7 Ultimate
 
 

I update this driver today morning from Realtek.

Can all of this be a faulty memory problem?

Thx for the quick reply.
My System SpecsSystem Spec
13 Dec 2009   #6
Geo64

Win7
 
 

Quote   Quote: Originally Posted by Gwindor View Post
I update this driver today morning from Realtek.

Can all of this be a faulty memory problem?

Thx for the quick reply.
I'd uninstall Avast then update all the drivers shown. Take things from there.

Did you also adjust your bios yet?
My System SpecsSystem Spec
13 Dec 2009   #7
Gwindor

Windows Vista Ultimate , Windows 7 Ultimate
 
 

Yes i have adjust my memory. but when i run memtest it shows one of the two dimms of ram to be faulty with errors.

I don't know if this cause all the problems but i mso desperate that tomorrow i m gonna spend some money to buy two brand new dimms of memory. What do u think?
My System SpecsSystem Spec
14 Dec 2009   #8
usasma
Microsoft MVP

 
 

The faulty RAM must be replaced before we can figure out what other problems that you may/may not have.
Once you get the new RAM, run Memtest for 3 passes to be sure you don't get errors - then post back and we'll see where to go from there.
My System SpecsSystem Spec
14 Dec 2009   #9
Gwindor

Windows Vista Ultimate , Windows 7 Ultimate
 
 

I replace the ram (both dimms withi new ones) memtest now says everything is ok...

I also do a clean install of windows 7 Ultimate x64.
Guess what.... BSOD continues after 10 min if working with my PC....

The new minidump files is this, can anyone tell me whats the prob now?

Thx u...
My System SpecsSystem Spec
14 Dec 2009   #10
usasma
Microsoft MVP

 
 

How many passes did you run with Memtest?

Try this free hard drive diagnostic: HD Diagnostic
If it passes, then try this:
Quote:
CHKDSK /R
Run CHKDSK /R from an elevated (Run as adminstrator) Command Prompt.
When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter. Then reboot and let the test run. It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors. See "CHKDSK LogFile" below in order to check the results of the test.

Elevated Command Prompt
Go to Start and type in "cmd.exe" (without the quotes)
At the top of the Search Box, right click on Cmd.exe and select "Run as administrator"

CHKDSK LogFile
Go to Start and type in "eventvwr.msc" (without the quotes) and press Enter
Expand the Windows logs heading, then select the Application log file entry.
Double click on the Source column header.
Scroll down the list until you find the Chkdsk entry.
Copy/paste the results into your next post.
My System SpecsSystem Spec
Reply

 Hello Again with another BSOD




Thread Tools



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:46.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App