Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Pc stopped and do not boot

16 Dec 2009   #1
Chafer

Windows 7
 
 
Pc stopped and do not boot

Well, I changed the timing of memories through the Intel Desktop Control Center, according to the manufacturer's support, OCZ, and sent restart. The PC stopped working.

Normally binds the hds, the coolers and the video card, but does not send signal to the monitor, the keyboard does not light (Logitech G15) and wireless mouse does not work.

I've done: I changed out the monitor cable, as I dismounted and mounted memories, as I clear CMOS, already took and put back the video card, I tried to use the HDMI exit of the video card and take off the jumper to restore BIOS. Still without success. The PC also stopped working the reset button, just off the finger himself, holding the ON button. Guarantee: no problem with the monitor (which is new), no problem of physical memory, has no problem with the video card.

Any suggestions?


My System SpecsSystem Spec
.
17 Dec 2009   #2
Jonathan_King

Windows 7 Professional x64
 
 

Hello, Welcome!
I am sorry, I did not understand your problem very much. Does your monitor ever show anything?
My System SpecsSystem Spec
17 Dec 2009   #3
Chafer

Windows 7
 
 

No, the monitor did not show anything, just flashes the LED operation, but the video card not sending the signal or give POST.

I did the Clear CMOS for over an hour ... did not work. I had to take to a repair center this morning to solve the problem, we had to put a memory stick to another brand, reset, replace the other, and finally connect the pc ...

It seems that by changing the frequency of my memories, they went into the BIOS crash came too ... We had to reset everything....

Now, problem solved, but thanks for the answer!
My System SpecsSystem Spec
.

17 Dec 2009   #4
Jonathan_King

Windows 7 Professional x64
 
 

Wow, I never would have pinned the problem to RAM. Thanks for posting!
My System SpecsSystem Spec
17 Dec 2009   #5
chev65

Windows 7 Ult, Windows 8.1 Pro,
 
 

Improper memory settings are probably the biggest cause of BSOD's over everything else. OCZ is by far the most difficult Ram to set up, no wonder you were having problems with it. Using the desktop control center over the bios was probably a mistake also.
My System SpecsSystem Spec
18 Dec 2009   #6
Chafer

Windows 7
 
 

I agree chev65. But it is the kind of thing that you only discover after you have done and create all these problems. After I built my pc I found out that OCZ memory and Intel motherboard are not very compatible ... Do what?
Thanks for the answer, I have helped someone with the same problem or helping someone who may have.
My System SpecsSystem Spec
Reply

 Pc stopped and do not boot




Thread Tools




Similar help and support threads
Thread Forum
[HELP]BFE services stopped and boot not working
Hello sevenforums member am in two new problem in my win7 32bit pc First is BFE service not running. first i open services.msc here i don't found any BFE service.i google it i so i found a registry editor file for repair bfe after installing reg file bfe show in services but an able to start...
General Discussion
Dual Boot Win 7 & XP - XP has stopped loading
2 years ago I created a Win 7/XP dual boot set up using this excellent tutorial: https://www.sevenforums.com/tutorials/8057-dual-boot-installation-windows-7-xp.html It has run faultlessly until now when the default Win 7 still loads perfectly well, but when selecting XP it now boots until the blue...
Installation & Setup
Win 7 64 bit pro stopped working, doesn't start - asks boot from cd
Hi, I was using Windows (win7 pro 64bit), just browsing the internet and then I went away from computer for an hour or two. When I came back computer had restarted itself and there was this black bios startup screen and it asked me to boot from cd. "Boot from cd: DISK BOOT FAILURE, INSERT SYSTEM...
General Discussion
Dual Boot: One partition has stopped booting
I seem to always one into this problem every couple of months it seems. I have a dual boot pc. One Partition has Windows 7 the Other XP. The XP boot looks like it got corrupted because when it boots it asks for I have to select "Last known good configuration". I hit that it the xp boot...
Installation & Setup
Dual boot-Stopped working!
Hi. I've been running a dual boot with Vista x64 and W7 x64. I've been doing this for a while and am presented with a choice between W7 and Vista at boot. Today I tried to boot into Vista and I can't move the choice with the keyboard arrows. I cannot choose Vista (2nd choice) and the up down...
Installation & Setup
Reinstall Win 7 has stopped dual boot
I have 3 partitions - 1=Vista, 2=Win 7, 3=Data. Dual boot had Vista as default but Win 7 available too. The Win 7 installation started coming up with a Winload error and would not repair. I Booted from Win 7 RC DVD, deleted partition 2 and re-installed Win 7 on the new, unallocated partition...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:45.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App