Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Please analyze my win7 x64 minidump file for me

26 Dec 2009   #1

Windows 7
Please analyze my win7 x64 minidump file for me(updated

I had gone a long time between BSODs until this occurred a couple of days ago. If somebody could analyze it for me, it would be greatly appreciated.
My System SpecsSystem Spec
26 Dec 2009   #2
Microsoft MVP


Not much info in the single memory dump file. Please zip up and upload the entire contents of the C:\Windows\Minidump folder. Often we need all of the minidumps to establish a pattern.

The only significant mention is that these drivers are older and should be updated:
LMouFilt.Sys Fri Feb 29 05:08:31 2008
LHidFilt.Sys Fri Feb 29 05:08:27 2008
Summary of the BSOD:
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Tue Dec 22 21:09:40.314 2009 (GMT-5)
System Uptime: 6 days 1:26:54.296
BugCheck 7A, {fffff6fc400394d8, ffffffffc000000e, 93096be0, fffff8800729b000}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+34cde )
My System SpecsSystem Spec
20 Feb 2010   #3

Windows 7

Ok, I've had two more crashes since original post. Here are all three mini dump files. Thanks for any assistance.
My System SpecsSystem Spec

20 Feb 2010   #4

Win 8 Release candidate 8400

Quote   Quote: Originally Posted by geepondy View Post
Ok, I've had two more crashes since original post. Here are all three mini dump files. Thanks for any assistance.

Hi Geepondy

Usual causes: Memory, Paging file corruption, File system, Hard drive, Cabling, Virus infection, Improperly seated cards, BIOS, Bad motherboard, Missing Service Pack

Lets start with the memory. download memtestx86 and run it for 5 passes.

For corrupt paging file. go to the system control panel and uncheck paging file. reboot. check page file and it will rebuild.

For file system corruption
run a system file check
type cmd in search>right clICk and run as admin>SFC /SCANNOW

fOR hd

021310-44725-01.dmp    2/13/2010 9:03:50 PM    KERNEL_DATA_INPAGE_ERROR    0x0000007a    fffff6fb`80008000    ffffffff`c000000e    00000000`a7576880    fffff700`01000000    ntoskrnl.exe    ntoskrnl.exe+71f00        x64    
122209-34304-01.dmp    12/22/2009 9:11:52 PM    KERNEL_DATA_INPAGE_ERROR    0x0000007a    fffff6fc`400394d8    ffffffff`c000000e    00000000`93096be0    fffff880`0729b000    ntoskrnl.exe    ntoskrnl.exe+71f00        x64    
013110-47798-01.dmp    1/31/2010 1:36:32 PM    KERNEL_DATA_INPAGE_ERROR    0x0000007a    fffff6fc`40007320    ffffffff`c00000c0    00000000`22ce1860    fffff880`00e64f90    volmgr.sys    volmgr.sys+ff90        x64

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\K\Desktop\New folder\021310-44725-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*
Executable search path is: 
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a0f000 PsLoadedModuleList = 0xfffff800`02c4ce50
Debug session time: Sat Feb 13 21:01:37.338 2010 (GMT-5)
System Uptime: 6 days 5:11:26.352
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck 7A, {fffff6fb80008000, ffffffffc000000e, a7576880, fffff70001000000}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+34cde )

Followup: MachineOwner

3: kd> !analyze -v
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error. Also see
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arg1: fffff6fb80008000, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc000000e, error status (normally i/o status code)
Arg3: 00000000a7576880, current process (virtual address for lock type 3, or PTE)
Arg4: fffff70001000000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Debugging Details:

ERROR_CODE: (NTSTATUS) 0xc000000e - A device which does not exist was specified.

DISK_HARDWARE_ERROR: There was error with disk hardware

BUGCHECK_STR:  0x7a_c000000e



PROCESS_NAME:  svchost.exe


TRAP_FRAME:  fffff88003386f70 -- (.trap 0xfffff88003386f70)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff70001080068 rbx=0000000000000000 rcx=0000000000000009
rdx=0000000000000002 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002d8e9da rsp=fffff88003387100 rbp=0000000000000009
 r8=fffff70001000000  r9=0000000000000000 r10=8000000000000000
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe nc
fffff800`02d8e9da 490fa308        bt      qword ptr [r8],rcx ds:ffff:fffff700`01000000=b8c1ea229f5b3127
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002af4438 to fffff80002a80f00

fffff880`03386c58 fffff800`02af4438 : 00000000`0000007a fffff6fb`80008000 ffffffff`c000000e 00000000`a7576880 : nt!KeBugCheckEx
fffff880`03386c60 fffff800`02a72d8b : fffffa80`076bf7c0 fffff880`03386dd0 fffffa80`03b596a8 fffff880`033873b0 : nt! ?? ::FNODOBFM::`string'+0x34cde
fffff880`03386d40 fffff800`02a9c09b : 00000000`00000000 00000000`00000000 ffffffff`ffffffff 00000000`00000000 : nt!MiIssueHardFault+0x28b
fffff880`03386e10 fffff800`02a7efee : 00000000`00000000 00000000`0145f000 00000000`00000000 fffff800`02a9caf5 : nt!MmAccessFault+0x14bb
fffff880`03386f70 fffff800`02d8e9da : fffff800`02c0ea00 fffff880`02fd3180 00000000`0000000f 00000000`000000ad : nt!KiPageFault+0x16e
fffff880`03387100 fffff800`02d804c3 : ffffffff`00000000 ffffffff`ffffffff 00000000`00000004 00000000`000007ff : nt!MiInsertVadCharges+0x10a
fffff880`03387190 fffff800`02a80153 : ffffffff`ffffffff fffff880`03387ad8 00000000`00000080 fffff880`03387ac8 : nt!NtAllocateVirtualMemory+0x773
fffff880`03387340 fffff800`02a7c6f0 : fffff800`02d47800 ffffffff`ffffffff 00000000`00000000 86200001`12cbe025 : nt!KiSystemServiceCopyEnd+0x13
fffff880`03387548 fffff800`02d47800 : ffffffff`ffffffff 00000000`00000000 86200001`12cbe025 80000001`12cbe121 : nt!KiServiceLinkage
fffff880`03387550 fffff800`02a80153 : fffffa80`03a8b700 00000000`00005a4d 00000000`ff630000 00000000`00000000 : nt!NtSetInformationProcess+0x383
fffff880`033878a0 fffff800`02a7c6f0 : fffff800`02d4abce 00000000`00000000 00000000`ff6300e8 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
fffff880`03387a38 fffff800`02d4abce : 00000000`00000000 00000000`ff6300e8 00000000`00000000 fffff800`02d77034 : nt!KiServiceLinkage
fffff880`03387a40 fffff800`02d493b2 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00001000 : nt!RtlCreateUserStack+0x122
fffff880`03387b30 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!PspAllocateThread+0x29e


nt! ?? ::FNODOBFM::`string'+34cde
fffff800`02af4438 cc              int     3


SYMBOL_NAME:  nt! ?? ::FNODOBFM::`string'+34cde

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  ntkrnlmp.exe


FAILURE_BUCKET_ID:  X64_0x7a_c000000e_nt!_??_::FNODOBFM::_string_+34cde

BUCKET_ID:  X64_0x7a_c000000e_nt!_??_::FNODOBFM::_string_+34cde

Followup: MachineOwner

3: kd> lmvm nt
start             end                 module name
fffff800`02a0f000 fffff800`02fec000   nt         (pdb symbols)          d:\symbols\ntkrnlmp.pdb\F8E2A8B5C9B74BF4A6E4A48F180099942\ntkrnlmp.pdb
    Loaded symbol image file: ntkrnlmp.exe
    Mapped memory image file: d:\symbols\ntkrnlmp.exe\4A5BC6005dd000\ntkrnlmp.exe
    Image path: ntkrnlmp.exe
    Image name: ntkrnlmp.exe
    Timestamp:        Mon Jul 13 19:40:48 2009 (4A5BC600)
    CheckSum:         0054B487
    ImageSize:        005DD000
    File version:     6.1.7600.16385
    Product version:  6.1.7600.16385
    File flags:       0 (Mask 3F)
    File OS:          40004 NT Win32
    File type:        1.0 App
    File date:        00000000.00000000
    Translations:     0409.04b0
    CompanyName:      Microsoft Corporation
    ProductName:      Microsoft® Windows® Operating System
    InternalName:     ntkrnlmp.exe
    OriginalFilename: ntkrnlmp.exe
    ProductVersion:   6.1.7600.16385
    FileVersion:      6.1.7600.16385 (win7_rtm.090713-1255)
    FileDescription:  NT Kernel & System
    LegalCopyright:   © Microsoft Corporation. All rights reserved.
My System SpecsSystem Spec
07 Jun 2010   #5

win7 32 bit

Please, be kind to analyze my dump files. Thank you in advance.
My System SpecsSystem Spec

Thread Tools

Similar help and support threads
Thread Forum
analyze this minidump please! BSOD crash
I put it in a zip file because it kept saying invalid to upload... Don't really know what it could be /: , all i know is that my computer was running really slow when it did it , and that whenever i typed it would delay for a couple seconds for it showed up in the chat box , its fine , now i just...
BSOD Help and Support
Can someone analyze my minidump file? Not a bsod.
My computer keeps freezing after coming out of sleep. I'm pretty sure it has something to do with the sound manager. Thanks.
BSOD Help and Support
Can someone please analyze this dump file?
For some reason, I can't get Windbg to work for me and its driving me nuts! >_< Much appreciated! My error: DBGHELP: c:\symbols\ntkrnlmp.pdb\47F5C3BF9E0A493C9F63BB8F6413358B2\ntkrnlmp.pdb - file system or network error reading pdb DBGHELP: ntkrnlmp.pdb - file not found *** ERROR:...
BSOD Help and Support
BSOD Win7 x64 New PC - Can't create a minidump file?
I recent built a new PC and after 2-3 days i got my first BSOD. The frist thing i did at this point was go to Startup and Recovery and make sure it was set write a small memory dump, Automatically Restart is also checked but for whatever reason it just sits on the BSOD until i force a power off and...
BSOD Help and Support
Can you please analyze this dump file .
ANd also explain how to read this ( what program is needed ) . I just see random stuff in the dmp file .. Thanks a million ..
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 06:23.
Twitter Facebook