Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 64bit BSOD

04 Jan 2010   #51
computersplus

Windows 7 Ultimate 32 bit
 
 
Driver

here is Nvidia 64 bit driver for that right from Nvidia

NVIDIA DRIVERS 195.62 WHQL

I am not sure on that last error that could be anything I am still mulling that one right now like I said try MS update and see


My System SpecsSystem Spec
.
04 Jan 2010   #52
newbie1234

Windows 7 Ultimate x64
 
 

It crashed again.. The Win32k.sys

*************************************************************
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 18441

Additional information about the problem:
BCCode: 50
BCP1: FFFFF2018444B140
BCP2: 0000000000000000
BCP3: FFFFF960000DF787
BCP4: 0000000000000007
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\010410-22854-01.dmp
C:\Users\Santa\AppData\Local\Temp\WER-34335-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Highlights - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
My System SpecsSystem Spec
04 Jan 2010   #53
computersplus

Windows 7 Ultimate 32 bit
 
 
Memory

you said your ram passed memtest I think you have some bad ram test the machine with one stick of ram at a time and see if you get any errors
My System SpecsSystem Spec
.

04 Jan 2010   #54
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by newbie1234 View Post
It crashed again.. The Win32k.sys

*************************************************************
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 18441

Additional information about the problem:
BCCode: 50
BCP1: FFFFF2018444B140
BCP2: 0000000000000000
BCP3: FFFFF960000DF787
BCP4: 0000000000000007
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\010410-22854-01.dmp
C:\Users\Santa\AppData\Local\Temp\WER-34335-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Highlights - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Hi

We need the actual dmp file use these to find and upload it to us. https://www.sevenforums.com/crash-loc...d-problem.html

thanks

Ken J+
My System SpecsSystem Spec
05 Jan 2010   #55
newbie1234

Windows 7 Ultimate x64
 
 

@Pauly

I have run the MemTest until 17Passes. So how should i carry on from here on sir?
My System SpecsSystem Spec
05 Jan 2010   #56
Wishmaster

Windows 7 Home Premium 64bit
 
 

you stated you have 4 sticks of RAM at 2GB each = 8Gb, correct?
what speed are they rated for and what are they set at?

Im sorry if i missed it, but what CPU -motherboard/chipset are you running?

MEMTEST passing for 17 full passes should be a good indication the RAM itself is good.

However, when the system is up and running with everything working together, it can still cause errors.
MEMTEST is just telling you the RAM itself is good.

With 4 slots full, this drastically increases the load on the NB, and the CPU. it also depends greatly on what speed/voltage you have the RAM set to ATM.
(hence memory related BSODS) Every board is different however, some will have np with all slots full, others will depending what type of RAm it is.

Depending on the type of board/CPU/Chipset you have ... you may need to make a couple adjustments in the bios to compensate for the additional load.

i'll look back over the thread, i may have missed something and be way off here ...
My System SpecsSystem Spec
05 Jan 2010   #57
newbie1234

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Wishmaster View Post
you stated you have 4 sticks of RAM at 2GB each = 8Gb, correct?
what speed are they rated for and what are they set at?

Im sorry if i missed it, but what CPU -motherboard/chipset are you running?

MEMTEST passing for 17 full passes should be a good indication the RAM itself is good.

However, when the system is up and running with everything working together, it can still cause errors.

With 4 slots full, this drastically increases the load on the NB, and the CPU. it also depends greatly on what speed/voltage you have the RAM set to ATM.
(hence memory related BSODS) Every board is different however, some will have np with all slots full, others will depending what type of RAm it is.

Depending on the type of board/CPU/Chipset you have ... you may need to make a couple adjustments in the bios to compensate for the additional load.

i'll look back over the thread, i may have missed something and be way off here ...
Motherboard : MSI P45-C51
RAM : x4 - 2GB Team Elite Ram DDR 1333

I will log on back to my Bios to verify on the speeds it has been set..

Will get back to you shortly Pauly..
My System SpecsSystem Spec
05 Jan 2010   #58
Wishmaster

Windows 7 Home Premium 64bit
 
 

Sorry, just seen that all on the very 1st post. Was looking at you Specs
Please update it for us


Yes, please verify that the voltage and timings both are set to what is recommended for 1333 speeds.
Your board says it supports DDR3 800/1066/1333 .. Please bear in mind this does not always mean it can support DDR3 1333 with all 4 slots full. These generally are refering to 2 slots/4GB .... But not always .. depends on board.


To find out if there's a issue with the board being able to run all 4 slots at that speed,
Go into your bios, and lower the DRAM speed to DDR3 1066 or DDR3 800. leave timings and voltages the same for now.

If the issues go away, we can go from there. Have you ran IBT or OOCT or any other form of stress test? not counting the MEMTEST
My System SpecsSystem Spec
05 Jan 2010   #59
newbie1234

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Wishmaster View Post
Sorry, just seen that all on the very 1st post. Was looking at you Specs
Please update it for us


Yes, please verify that the voltage and timings both are set to what is recommended for 1333 speeds.
Your board says it supports DDR3 800/1066/1333 .. Please bear in mind this does not always mean it can support DDR3 1333 with all 4 slots full. These generally are refering to 2 slots/4GB .... But not always .. depends on board.


To find out if there's a issue with the board being able to run all 4 slots at that speed,
Go into your bios, and lower the DRAM speed to DDR3 1066 or DDR3 800. leave timings and voltages the same for now.

If the issues go away, we can go from there. Have you ran IBT or OOCT or any other form of stress test? not counting the MEMTEST
I think i saw my DRAM Timing mode = Auto. I might go in and try test it out and see.

Also just to find out should i leave my FSB/DRAM Ratio to Auto, since there are a few settings for it - 1.1.50, 1.1.20, 1.1.60, 1.2.00, 1.1.00, 1.1.33?

I have not run the IBT and OOCT. Could you provide me with the links. Thanks
My System SpecsSystem Spec
05 Jan 2010   #60
newbie1234

Windows 7 Ultimate x64
 
 

I do not know why My Service Conrtrol Manager error is popping out again in Event Viewer : The NVIDIA Display Driver Service service has reported an invalid current state 32.
My System SpecsSystem Spec
Reply

 Windows 7 64bit BSOD




Thread Tools




Similar help and support threads
Thread Forum
BSOD Winxp 64bit, Win7 Pro 64bit many error codes
Hi every one, i have this machine which is causing too much headache for me, this machine was having Windows XP 64 Bit, and it had a lot of BSOD crashes, then i just decided that it's the time to make the move to Windows 7 for this high performance machine, since i was not able to upgrade to...
BSOD Help and Support
BSOD on windows 7 64bit only!
I already had 2 OS on my HDDs (win xp and win 7 32-bit).. everything's fine on them... no BSOD... been using win xp for more than 3 years now ... and win 7 32-bit for 1 year... no major problems... now i wanted to install win 7 64bit to take full advantage of my 4gb ram(i had since the purchase of...
BSOD Help and Support
Bsod Windows 7 64bit
Hi Well I have a strange problem when testing a 3D graphics card brand is, nothing happens, and when the computer reboots while playing and then the 3D Mark test bSod restarts the computer card is operational was the latest gwarancji.Drivers are loaded, daemon tools uninstall anything not given,...
BSOD Help and Support
BSOD on windows 7 64bit
hi, windows 7 64bit the original OS was windows XP OEM Version Hardware: P5k pro, Intel core 2quad CPU Q6600, 4,0gb ram, Nvidia GeForce 9600gt I re-installed windows seven 2 days ago. i attacched windows7report, the folder that you need and three dump file of my BSOD
BSOD Help and Support
Windows 7 Pro 64bit BSOD
Windows 7 64-bit Professional Brand new PC. Specs: Motherboard: Gigabyte EX58-UD3R Rev 1.6 RAM: G-Skill 3x2GB Tri-channel Memory DDR3-1600 CPU: Intel i7-930 GPU: ASUS Radeon 5850
BSOD Help and Support
BSOD windows 7 64bit help me
hi I can not solve the problem. Help me Additional information about the problem: BCCode: 1000007e BCP1: FFFFFFFFC0000002 BCP2: FFFFF800030B87F8
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:29.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App