Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: I'm back, more new, sudden BSODs three minidumps

06 Jan 2010   #1
James7679

Windows 7 Home Premium x64
 
 
I'm back, more new, sudden BSODs three minidumps

Hello you 7 gurus. I'm back with some new minidump files. Any help you ppl can give me would be greatly appreciated. BTW, no commonality to give you on these other than the computer was at rest(not in use). It was not sleeping or in hibernation, just resting. Wish I could give you more help. I have run mem diag, everything there is fine. I have also ran startup repair because after the second(?) bsod she wouldnt come back up.


My System SpecsSystem Spec
.
06 Jan 2010   #2
James7679

Windows 7 Home Premium x64
 
 

Wow, no help? Is it that bad? Oh yeah, and COD4 is apparently crashing all the time now.
My System SpecsSystem Spec
06 Jan 2010   #3
ickymay

win7 ultimate / virtual box
 
 

your "SSPORT.sys fffff880`08b86000 fffff880`08b8e000 0x00008000 0x42fbda34 11/08/2005 23:07:32" driver needs updating , would it be a samsung printer ?

your problems all look like ram issues with stop error 0x0000001a pointing to MEMORY_MANAGEMENT,

I suggest you run memtest86 overnight for at least 3 passes and post back here if you get any errors,

what size and make of Power Supply do you have as these crashes can be caused by voltages dropping on the ram ?

or even bad contact in the ram slot ?
My System SpecsSystem Spec
.

06 Jan 2010   #4
James7679

Windows 7 Home Premium x64
 
 

I have a corsair 550watt psu, i know, but heres the thing. Everything has been fine for months since I pulled one of my cards out(a bad ram card). Nothing has changed hardware wise. I have'nt even taken anything apart only a cleaning about two weeks ago. My pc runs 24/7 and it never has problems, maybe more bad ram? Or bad MoBo? I'll run memtest again and let you know.
My System SpecsSystem Spec
06 Jan 2010   #5
Wishmaster

Windows 7 Home Premium 64bit
 
 

What speed are your Dominators rated for
and what are they running at currently? Speed/Timing/Voltage
My System SpecsSystem Spec
06 Jan 2010   #6
James7679

Windows 7 Home Premium x64
 
 

They are rated at 1333. mem freq @ 800(ddr2)mhz. mem ratio 2.0 x. fsb freq 200 mhz. cas latency 5. Does that help? I think the voltage is at 1.8
My System SpecsSystem Spec
06 Jan 2010   #7
Wishmaster

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by jamesandalexis View Post
They are rated at 1333. mem freq @ 800(ddr2)mhz. mem ratio 2.0 x. fsb freq 200 mhz. cas latency 5. Does that help? I think the voltage is at 1.8

Was looking at your board. it looks as if it's rated at DDR2 800 for the MEM standard up to 8GB. Thing is, with all 4 slots full, using 8GB this may, or may not be a issue as 4 slots full does put a greater load on the NB.....

Was thinking it could be something along these lines.
But if your running at 800mhz 5-5-5-15(18), you should be OK. Thats fairly relaxed settings. :-/ And the fact you said there was no issues until recently.
I would however, Bump the VDIMM to 1.9 - 1.95V
Dominators are be perfectly fine all the way to 2.1 (1066 speed)

non-the-less
If you have run MEMTEST and passed i would suggest:

Running IBT (Intell Burn Test) for 5-10 passes , at a MAX stress level.
In order to find out if the NB itself is under too much stress with all 4 slots full.

I have a feeling its not the cause here, but it wouldnt hurt to test and see to be sure stability along the NB isnt causing the occasional MEMORY_MANAGEMENT error..
My System SpecsSystem Spec
07 Jan 2010   #8
James7679

Windows 7 Home Premium x64
 
 

Ok, I got up this morning to check the forum, booted the computer and checked the thread. I went to get a cup of coffee and came back to a BSOD, the desc was something like "irq_notless_than_orequal_to" with a code something along the lines of "stop0000003.....". As I was about to load this info with an explanation and the minidump, it BSODd again, this time with a "memory_management" tag and another "stop0000003....". In my frustration and lateness to work I was not able to sit there and reload all of this info. When I get home I will attempt to run the "IBT" and let you know the results. I do have one question, could this be related to Airbots thread (first one in this forum) entitled "sticky..."? Only ask because I have a large hd and I keep getting stop codes. Thanks again for your help.
My System SpecsSystem Spec
07 Jan 2010   #9
James7679

Windows 7 Home Premium x64
 
 

Here are the minidumps from today. I am going to get intell burn test and run it. I'll get you the results.
My System SpecsSystem Spec
07 Jan 2010   #10
James7679

Windows 7 Home Premium x64
 
 

Wishmaster, my friend, after going to Guru3d's wesite to download "intell burn test" I was confronted with a pretty hefty warning about this program. They state that it has been know to fry cpus and/or mobos. Is that a bunch of horse squeeze? I know my processor sucks, but I don't want to replace it right now. What are your feelings on this?
My System SpecsSystem Spec
Reply

 I'm back, more new, sudden BSODs three minidumps




Thread Tools




Similar help and support threads
Thread Forum
Random BSODs, New Computer Build, minidumps included
This is my first computer build, completed in September. Desktop has been used infrequently but will need to be used daily here soon. This computer is primarily going to be used for flash animation and video editing. There has been no pattern when receiving a BSOD. From what I can recall,...
BSOD Help and Support
BSODs - finding a reason (+minidumps)
Hello, I keep having BSODs for quite a long time. Basicly since I have this computer (5 months). Usually it happens during rendering, playing a game or if computer is running for a long time. I tried to find out the reason for myself, but I don't understand it too much and usually it says a...
BSOD Help and Support
NEW PC HARDWARE BSODS - minidumps in
Hi you all!! Well, I've had a lot of bsods. I've test hdd, ram, change cpu but they still here... So I need your help;) Bsods always happen after few minutes - three, four - system is logged. And, after first bsod, such restart means another bsod...:mad: So, I turn pc off and go to sleep. In...
BSOD Help and Support
Help me with Win 7 64-bit endless BSODs - minidumps
So many! Can't take it anymore! I installed win 7 64 bit few weeks ago and I had allot of Random BSOD since! 50 Minidumps included: Salvege me from the situation! Thank you so much.
BSOD Help and Support
Lots of sudden BSoD - minidumps avail
Having random bsods every day, as well as other problems. (this is the 3rd time I have to type this message out, so forgive the lack of info, I want to get this out) EDIT: They are all over the place, but the mean comes from ntfs.sys and ntoskrnl.exe. This is a relatively new install on...
BSOD Help and Support
Memory Management BSODs + Minidumps
Hi, For the past month I've been having an absolute nightmare in regards to Bluescreens on a new build. Originally I thought that a faulty stick of ram (Failed Memtest) was the problem but even after replacing the stick I'm still plagued with BSODs whenever the computer attempts anything to...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:07.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App