A few thin red lines running up from my pc?


  1. Posts : 9
    Windows 7 Starter
       #1

    A few thin red lines running up from my pc?


    I bet it's not dead pixel or something, cause it sometimes appear, not too often.
    Sorry I can't take a screenshot from it, cause the screenshot can't seem to take it.

    Any comment would be appreciate.
    Thanks
      My Computer


  2. Posts : 2,588
    SEVEN x64
       #2

    game333 said:
    I bet it's not dead pixel or something, cause it sometimes appear, not too often.
    Sorry I can't take a screenshot from it, cause the screenshot can't seem to take it.

    Any comment would be appreciate.
    Thanks
    Hi there....


    if the screenshot wont duplicate what your seeing, its 100% monitor related.

    the panel itself may be on the verge of failing (or at the very least loosing the pixels in question forever), is it always in the same spot..??

    how long have you had the monitor, & what is the exact model..??
      My Computer


  3. Posts : 1,020
    Windows 7 Ultimate 64 bit
       #3

    Hi game333,

    In my experience it is most likely that your monitor might be on it's way out, (EDIT - I see skunksmash thinks the same) so check the warranty asap. Other less likely causes could be a dying graphics card, or (if it's a new installation) new drivers or firmware needed for either the graphics card or monitor. It could also be a faulty cable.

    Try to test with either a different graphics card, monitor and cable (if you have one or can beg or borrow one) to work out which piece of hardware has the issue. If it's the graphics card that you are testing, remember to be aware of multiple port cards and test all available ports.

    Good Luck

    Also look up your monitors native resolution on the manufacturers website and set your graphic card to it.
    Last edited by TimStitt; 16 Jan 2010 at 08:57. Reason: Posted seconds after skunksmash
      My Computer


  4. Posts : 2,588
    SEVEN x64
       #4

    TimStitt said:
    Hi game333,

    In my experience it is most likely that your monitor might be on it's way out, so check the warranty asap. Other causes could be a dying graphics card, or (if it's a new installation) new drivers or firmware needed for either the graphics card or monitor. It could also be a faulty cable.

    Try to test with either a different graphics card, monitor and cable (if you have one or can beg or borrow one) to work out which piece of hardware has the issue. If it's the graphics card that you are testing, remember to be aware of multiple port cards and test all available ports.

    Good Luck

    Also look up your monitors native resolution on the manufacturers website and set your graphic card too it.
    im sure a screenshot would pick up GPU artifacting, its only the monitor directly that'll be able to bypass it...

    but its good advice all the same.
      My Computer


  5. Posts : 1,020
    Windows 7 Ultimate 64 bit
       #5

    skunksmash said:
    TimStitt said:
    Hi game333,

    In my experience it is most likely that your monitor might be on it's way out, so check the warranty asap. Other causes could be a dying graphics card, or (if it's a new installation) new drivers or firmware needed for either the graphics card or monitor. It could also be a faulty cable.

    Try to test with either a different graphics card, monitor and cable (if you have one or can beg or borrow one) to work out which piece of hardware has the issue. If it's the graphics card that you are testing, remember to be aware of multiple port cards and test all available ports.

    Good Luck

    Also look up your monitors native resolution on the manufacturers website and set your graphic card too it.
    im sure a screenshot would pick up GPU artifacting, its only the monitor directly that'll be able to bypass it...

    but its good advice all the same.
    RE: GPUartifacting - Yep I'm definite it would too. What I was thinking that if the problem was on port heading out, it might behave similar to a cable issue, where the screen prints don't always pick it up (admittedly, a Graphics card failing there would be extremely rare though). I'm with you in that I think the monitor is dying.Lets hope it's under Warranty.
      My Computer


  6. Posts : 2,588
    SEVEN x64
       #6

    TimStitt said:
    skunksmash said:
    TimStitt said:
    Hi game333,

    In my experience it is most likely that your monitor might be on it's way out, so check the warranty asap. Other causes could be a dying graphics card, or (if it's a new installation) new drivers or firmware needed for either the graphics card or monitor. It could also be a faulty cable.

    Try to test with either a different graphics card, monitor and cable (if you have one or can beg or borrow one) to work out which piece of hardware has the issue. If it's the graphics card that you are testing, remember to be aware of multiple port cards and test all available ports.

    Good Luck

    Also look up your monitors native resolution on the manufacturers website and set your graphic card too it.
    im sure a screenshot would pick up GPU artifacting, its only the monitor directly that'll be able to bypass it...

    but its good advice all the same.
    RE: GPUartifacting - Yep I'm definite it would too. What I was thinking that if the problem was on port heading out, it might behave similar to a cable issue, where the screen prints don't always pick it up (admittedly, a Graphics card failing there would be extremely rare though). I'm with you in that I think the monitor is dying.Lets hope it's under Warranty.
    ..... your right, it could well be a port on the monitor or card....or the cable connecting the two..


    check these out also..... switch the ports on the back of the card (maybe one of them is not contacting properly), & maybe change the DVI/VGA cable your using.

    but failing all we've posted above...a new monitor could be on the horizon.
      My Computer


  7. Posts : 9
    Windows 7 Starter
    Thread Starter
       #7

    skunksmash said:
    TimStitt said:
    skunksmash said:

    im sure a screenshot would pick up GPU artifacting, its only the monitor directly that'll be able to bypass it...

    but its good advice all the same.
    RE: GPUartifacting - Yep I'm definite it would too. What I was thinking that if the problem was on port heading out, it might behave similar to a cable issue, where the screen prints don't always pick it up (admittedly, a Graphics card failing there would be extremely rare though). I'm with you in that I think the monitor is dying.Lets hope it's under Warranty.
    ..... your right, it could well be a port on the monitor or card....or the cable connecting the two..


    check these out also..... switch the ports on the back of the card (maybe one of them is not contacting properly), & maybe change the DVI/VGA cable your using.

    but failing all we've posted above...a new monitor could be on the horizon.
    Thanks for all of your comments mate.
    It might true that is my monitor case, cause I own this monitor since from 2006 feb.
    So I think it would be.
    Thanks ya and have a good day.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 19:48.
Find Us