Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 2 BSOD's in last 10 min

17 Jan 2010   #1
magicboy

windows 7 64 bit
 
 
2 BSOD's in last 10 min

I have just recently had 2 bsod in the last 10 min anyone else having this problem


My System SpecsSystem Spec
.
17 Jan 2010   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by magicboy View Post
I have just recently had 2 bsod in the last 10 min anyone else having this problem
I will bet you are 64 bit, right?


I have just finished my 18 analysis and 16 were 64bit. we really need the dmp file to tell you what caused it. use these to find and upload. https://www.sevenforums.com/crash-loc...d-problem.html

thanks


Ken J+
My System SpecsSystem Spec
17 Jan 2010   #3
magicboy

windows 7 64 bit
 
 

here is the mini dump 4 bsods today i think. and yes its 64 bit.
My System SpecsSystem Spec
.

17 Jan 2010   #4
Lordbob75

Windows 7 Ultimate x64, Mint 9
 
 

Magicboy, seems to be a corrupt Network driver.

Open command prompt (run as admin) and type this:
Code:
sfc /scannow
You should also try to remove and then reinstall your network driver.

~Lordbob
My System SpecsSystem Spec
17 Jan 2010   #5
magicboy

windows 7 64 bit
 
 

Thanks im running the scan just now, I recently reinstalled the network driver to try to stop first boot of day crashing but that didn't work. My computer is also running slower than it did when i got it. it takes about 20 seconds saying starting windows then about 10 seconds to use it. I didnt know if that had anything to do with it. thanks
My System SpecsSystem Spec
17 Jan 2010   #6
Lordbob75

Windows 7 Ultimate x64, Mint 9
 
 

20 seconds is a good start time. Mine is a lot more than that.....

Also, open up the Network and Sharking center, click on change adapter settings, then right click on your adapter and hit properties. What is installed, and what is not?

~Lordbob
My System SpecsSystem Spec
17 Jan 2010   #7
magicboy

windows 7 64 bit
 
 

I'm in it but how do i know whats installed and whats not, and that scan just finished and said windows resource protection did not find any integrity violations.
My System SpecsSystem Spec
17 Jan 2010   #8
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by magicboy View Post
here is the mini dump 4 bsods today i think. and yes its 64 bit.

Even before I look at them I will bet it is memory. be right back

Well guess what, memory corruption.

64bit is extremely sensitive to memory changes.

here is what I would do
downlaod memtestx86 and run it for 5 passes. Yes its a long time. we need to find out if it is memory or heat

run a system file check
type cmd in search>right click and run as admin>sfc /scannow

If you are overclocking STOP
make sure all the BIOS settings are stock

Good Luck

Ken J+


Code:
011710-16286-01.dmp    1/17/2010 8:00:56 PM    IRQL_NOT_LESS_OR_EQUAL    0x0000000a    00000000`00000028    00000000`00000002    00000000`00000000    fffff800`02f10090    ntoskrnl.exe    ntoskrnl.exe+71f00                    x64        C:\Users\K\Desktop\New folder\011710-16286-01.dmp    4    15    7600    
011710-17877-01.dmp    1/17/2010 7:55:52 PM    IRQL_NOT_LESS_OR_EQUAL    0x0000000a    00000000`00000028    00000000`00000002    00000000`00000000    fffff800`02f00090    ntoskrnl.exe    ntoskrnl.exe+71f00                    x64        C:\Users\K\Desktop\New folder\011710-17877-01.dmp    4    15    7600    
011710-20950-01.dmp    1/17/2010 11:05:52 AM    PAGE_FAULT_IN_NONPAGED_AREA    0x00000050    fffff880`039a1890    00000000`00000000    fffff880`02d57a59    00000000`00000000    ntoskrnl.exe    ntoskrnl.exe+71f00                    x64        C:\Users\K\Desktop\New folder\011710-20950-01.dmp    4    15    7600
Code:
Loading Dump File [C:\Users\K\Desktop\New folder\011710-16286-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02e5c000 PsLoadedModuleList = 0xfffff800`03099e50
Debug session time: Sun Jan 17 15:00:09.566 2010 (GMT-5)
System Uptime: 0 days 0:04:39.002
Loading Kernel Symbols
...............................................................
................................................................
............................................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {28, 2, 0, fffff80002f10090}

Probably caused by : memory_corruption ( nt!MiFindNodeOrParent+0 )

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000028, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002f10090, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800031040e0
 0000000000000028 

CURRENT_IRQL:  2

FAULTING_IP: 
nt!MiFindNodeOrParent+0
fffff800`02f10090 48f7412800ffffff test    qword ptr [rcx+28h],0FFFFFFFFFFFFFF00h

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xA

PROCESS_NAME:  iexplore.exe

TRAP_FRAME:  fffff880033165c0 -- (.trap 0xfffff880033165c0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002f10090 rsp=fffff88003316758 rbp=0000000000000000
 r8=fffff880033167a0  r9=0000000000000000 r10=fffffa8003dd7da0
r11=fffffa800404a070 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na po nc
nt!MiFindNodeOrParent:
fffff800`02f10090 48f7412800ffffff test    qword ptr [rcx+28h],0FFFFFFFFFFFFFF00h ds:6748:00000000`00000028=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002ecd469 to fffff80002ecdf00

STACK_TEXT:  
fffff880`03316478 fffff800`02ecd469 : 00000000`0000000a 00000000`00000028 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`03316480 fffff800`02ecc0e0 : fffff880`00fbd604 fffffa80`03dd7de8 00000000`00000008 fffff880`00fbe8ff : nt!KiBugCheckDispatch+0x69
fffff880`033165c0 fffff800`02f10090 : fffff800`02f13e17 fffff880`02fd3180 00000000`00000002 00000000`00000000 : nt!KiPageFault+0x260
fffff880`03316758 fffff800`02f13e17 : fffff880`02fd3180 00000000`00000002 00000000`00000000 00000000`000008e1 : nt!MiFindNodeOrParent
fffff880`03316760 fffff800`02f13d9d : 00000000`63416d4d 00000000`00000002 00000000`00000000 00000000`00001000 : nt!MiLocateAddressInTree+0x17
fffff880`03316790 fffff800`02f13ea8 : 00000000`00000000 fffffa80`06b82000 fffffa80`054896b0 fffffa80`03dd7e90 : nt!MiGetSharedProtosAtDpcLevel+0xbd
fffff880`033167e0 fffff800`02e6a19b : fffffa80`04295018 fffff800`02ee1490 fffff880`033168d8 fffff880`02fd3180 : nt!MiGetSharedProtos+0x18
fffff880`03316810 fffff800`02fd2810 : 00000000`00000000 fffffa80`03dd7de0 fffff880`02fd3180 fffff800`02edbf21 : nt! ?? ::FNODOBFM::`string'+0x92bb
fffff880`03316840 fffff800`02fd29f0 : fffffa80`041b5b30 00000003`00000000 fffffa80`03dd7da0 fffffa80`03dd7e90 : nt!MiEmptyPageAccessLog+0x160
fffff880`033168b0 fffff800`02fd2bf6 : fffffa80`05489000 00000000`00003350 fffff680`00037fc0 00000000`00000000 : nt!MiAllocateAccessLog+0x80
fffff880`033168e0 fffff800`02f361d8 : 00000003`00000000 b5000000`6549f867 00000000`00000000 00000000`00003350 : nt!MiLogPageAccess+0x46
fffff880`03316930 fffff800`02f4ea0e : fffffa80`041b5ec8 fffff880`00000001 00000000`00000001 fffff880`03316bb0 : nt! ?? ::FNODOBFM::`string'+0x21846
fffff880`03316ae0 fffff800`02ee26e2 : 00000000`00000117 00000000`00000000 fffffa80`00000000 00000000`00000004 : nt! ?? ::FNODOBFM::`string'+0x49926
fffff880`03316b80 fffff800`02ee296f : 00000000`00000008 fffff880`03316c10 00000000`00000001 fffffa80`00000000 : nt!MmWorkingSetManager+0x6e
fffff880`03316bd0 fffff800`03171166 : fffffa80`03a06680 00000000`00000080 fffffa80`039e7040 00000000`00000001 : nt!KeBalanceSetManager+0x1c3
fffff880`03316d40 fffff800`02eac486 : fffff880`02f63180 fffffa80`03a06680 fffff880`02f6dfc0 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`03316d80 00000000`00000000 : fffff880`03317000 fffff880`03311000 fffff880`03316710 00000000`00000000 : nt!KxStartSystemThread+0x16


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!MiFindNodeOrParent+0
fffff800`02f10090 48f7412800ffffff test    qword ptr [rcx+28h],0FFFFFFFFFFFFFF00h

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  nt!MiFindNodeOrParent+0

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP:  4a5bc600

IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0xA_nt!MiFindNodeOrParent+0

BUCKET_ID:  X64_0xA_nt!MiFindNodeOrParent+0

Followup: MachineOwner
---------
My System SpecsSystem Spec
17 Jan 2010   #9
Lordbob75

Windows 7 Ultimate x64, Mint 9
 
 

Ok good. There should be a short list of some weird things like TCP/IP Protocol 4 and 6, etc. They should either have a checkmark or not.

~Lordbob
My System SpecsSystem Spec
17 Jan 2010   #10
magicboy

windows 7 64 bit
 
 

Everything in it has ticks.
My System SpecsSystem Spec
Reply

 2 BSOD's in last 10 min




Thread Tools



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:07.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App