Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: bsod with 3 or more core but not 2 cores running

17 Jan 2010   #1

bsod with 3 or more core but not 2 cores running

hardware - bfg680i,q9550 4 core processor,4gig mem running win7
it gets bsod after about 10 minutes or so but only when running with 3-4 cores running.Run just 2 cores nad it is fine.Tried reloading windows but get throught installing partway and crashes again only with more then 2 cores running. Installs fine with just 2 cores.Reflashed motherboard to most current bios so that I could run this 4core as before I only ran a 2 core processor..BFG says that this q9550 is compatible with there board with current bios.I have provided a dmp below for help diagnosing this problem.I do have another q9550 to possibly try out it the mini dump points in that direction.Memory has passed MEMTEST.
Thank you for your help

My System SpecsSystem Spec
17 Jan 2010   #2

Windows 7 Ultimate x64, Mint 9

Snapmit, can you upload the .dmp file? Just copy it from the minidump folder and zip it up. That is unreadable.

Also, this may be either a heat problem or incompatible BIOS. Make sure that your temps are reasonable.

My System SpecsSystem Spec
24 Nov 2010   #3

Windows 7
Think I have similar problem

I have a similar problem where if I try to use cores 3 and/or 4 I get BSOD at windows login.
Have you confirmed if its a problem with running 3 or more cores or specifically with cores 3 or 4? ie have you tried core 1 and core 3 only, or core 1 and core 4.
My System SpecsSystem Spec

25 Nov 2010   #4


What I found in my case was that 680i boards do no support 45nm processors only 65nm chips.BFG was incorrect in telling me it would work in there board.It did work but only if I had no more then 2 turned on it did not matter which cores. I bought a 65nm quad core extreme and it functioned fine. Then I took the 9550 and installed it in a new board (Asus 790i board) that does support 45nm processors and the processor worked fine . So the whole time it was a matter of incompatible hardware.
My System SpecsSystem Spec

 bsod with 3 or more core but not 2 cores running

Thread Tools

Similar help and support threads
Thread Forum
CPU Core 1 - 100% other 7 cores 0-10% Freezes PC
Ok guys, ive read similar problems to this over the forums all with similar answers and none of them worked. so here's the problem. my PC a few weeks ago after turning it on the mouse became extremely laggy and i noticed the Core1 on my quad core i7 2600K was completely maxed. after checking...
BSOD Help and Support
BSOD's when i5 2400 running on all 4 cores.
Hello Seven forums, I have been experiencing BSOD's (Mostly Driver_IRQL,Memory_Management) on my PC.This is the 3rd thread that i have started for this error with no avail and my hope is faltering.Pls look into this issue i do not want to buy another 300$ processor .In our country $300 is more...
BSOD Help and Support
DXDIAG says that my intel core i3 has 4 cores
hi there, this is not really a problem im just curious. i have an acer aspire 5742 laptop with an intel core i3 M 380 @ 2.53 ghz, 8GB ram intel hd graphics and windows 7 home premium 64 bit. when i run dx diag it says that i have 4 cpu's at 2.5ghz when i go on computer it dosent say i have a...
General Discussion
Quad Core 2 Cores at dif temps
My q9400 burns at 33c on idel on cores 0 and 1 but cores 2 and 3 burn 2c hotter is this normal for a quad core?
Hardware & Devices
Quad core with three cores doing nothing
Hello, I have an Athlon Phenom X4 925 and installed windows 7 32 bit on it about 2 months ago. Everything was working great. Applications were assigned to different cores and TMpgEnc used all 4 cores when encoding. But today I noticed that TMpgEnc was slower and I saw in the task manager that...
Performance & Maintenance

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:33.
Twitter Facebook Google+