Win 7 64bit - install BSOD framebuf, driving me nuts?

Hi,

Hope someone able to help. Built numerous PCs and recently upgrade MCE and Desktop PC with same specs.

Asus M4A785TD-V EVO mobo (on board Ati HD4200)
Kingston 4gb Hyperx DDR 3 1333
Phenom II x2 550 Black Edition

MCE PC is built fine no issues with Win 7 64bit Premium

Desktop PC built with Win 7 64bit Ultimate wont boot after first restart - loops with BSOD framebuf error. Been trying to resolve now for nearly 3 hrs and its driving me nuts!

Only using the on board gfx - their are numerous intergrated gfx bios framebuffer settings but not touched them as didnt with MCE and that PC worked fine.

Currently trying to get to the minidump to zip and post it up.

Any advice or help much appreciated.

Wayne, UK

WDruryUK said:

Hi,

Hope someone able to help. Built numerous PCs and recently upgrade MCE and Desktop PC with same specs.

Asus M4A785TD-V EVO mobo (on board Ati HD4200)
Kingston 4gb Hyperx DDR 3 1333
Phenom II x2 550 Black Edition

MCE PC is built fine no issues with Win 7 64bit Premium

Desktop PC built with Win 7 64bit Ultimate wont boot after first restart - loops with BSOD framebuf error. Been trying to resolve now for nearly 3 hrs and its driving me nuts!

Only using the on board gfx - their are numerous intergrated gfx bios framebuffer settings but not touched them as didnt with MCE and that PC worked fine.

Currently trying to get to the minidump to zip and post it up.

Any advice or help much appreciated.

Wayne, UK

Wayne Hi and welcome

you can use these to find and upload the DMP file. https://www.sevenforums.com/crash-loc...d-problem.html

thanks

Ken J=+

Thanks Ken.

Got further - tried swapping both memory sticks to the other 2 slots and now the PCs boots into Windows finally.

Now the bad news...before installing all drivers I thought I just put back in my Asus GTX 275 (only difference to my MCE build)

Well PC still boots, but at Win 7 logo it strobes/flickers fast. Then in Windows I notice the clock in system tray is counting the minutes, like they are seconds. When I right clicked to adjust clock, the clock image has the hands just spinning - like I have a super computer or something. Looking at the performance monitor its going like a rocket.

So...about to remove the GTX 275 and continue driver installs to complete build before trying to put GTX 275 card back in.

I think its something to do with the on board ATI gfx interfering with the GTX 275. But doesnt seem to be a way to disable the on board gfx chip

Thanks

Wayne

I suspect drivers 195.62 are causing BSOD on my system. Since I removed them I have no more BSOD. However, this BSOD problem is under investigation in another thread and I provide this information only to help.

This do not mean the driver is not correct for your system. But it cost nothing to try reverting back to more stable nvidia drivers.

If you go on nvidia forum, you will notice lot of people are saying recents nvidia drivers are really unstable with windows 7 32x/64x.

Thanks ManOWar2.

Another update...(damn im tired)...

Ok, removed GTX 275, still wierd logo flickr on boot and also high speed clock/performance monitors in Windows. Reboot and still flickering logo and speedy clock/perf monitor.

Next, remove 1x DDR3 module, reboot and all fine with Windows boot logo animation, looking good. In Windows now at 1920x1080 as would expect for my monitor. Better...installed all mobo drivers and still ok after 3x reboots. Now im getting somewhere.

Ok, time to put back the GTX 275 and boot up...
Oh no... Windows boot logo in flicker mode again and windows now in like a standard vga mode. Ok properties of display adapter states unknown - like im using windows default. Ok this has to be some wierd thing with the onboard gfx messing up my nice Nvidia GTX 275.
Remove card again...reboot and all back to normal again.

Ok...try swapping memory module to other suspect module, but still on using 2gb.
PC boots up fine and no logo flicker on boot, nor any BSOD...
Ok..try both modules again...
PC boots, but with damn Windows logo flicker, then its BSOD. Remove 1x of the modules again and reboot...

PC boots fine again, no logo flicker, windows back in the 1920x1080 mode, and properties for driver shows its using the on board ATI HD4200. Even Clock and Performance monitor is running at normal speeds.

Argh - what the hell is going on I ask my self...still researching and testing....

Tomorrow I will nick the memory from my MCE (bought same time as this kit - 2 lots for these 2 builds) will test in Desktop as the 4gb is working fine in the MCE.

Appreciate any further ideas folks...??

Wayne

Confirmed motherboard was the cause!

Great if you could solve the problem.