Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD again.. Minidump file check?

03 Feb 2010   #11
WIGILOCO

Windows 7 64-bit
 
 

Should I run memtest86+ without any problems on memory like strutter in games and freezes on using? It works well so I think my memory is allright.


My System SpecsSystem Spec
.
04 Feb 2010   #12
WIGILOCO

Windows 7 64-bit
 
 

Hello again! I started once again my pc just ten minutes ago and bsod came on desktop.. Then computer started automatically and bsod came while loading windows. Then I shut down computer and started again and the post message said lot of things and " overclock failed ". I have never overclocked anything! Except I put my memory to work on 1600MHz when mobo putted them to 1333MHz. I had the right settings for that. So here are three minidumps for those three BSODs and could some knowing person analyze them please? Really help needed now.. Getting so so so frustraded that my new pc failing on boot..
My System SpecsSystem Spec
04 Feb 2010   #13
WIGILOCO

Windows 7 64-bit
 
 

Bump!
My System SpecsSystem Spec
.

05 Feb 2010   #14
WIGILOCO

Windows 7 64-bit
 
 

Could someone please analyze those minidumps?
My System SpecsSystem Spec
06 Feb 2010   #15
usasma
Microsoft MVP

 
 

What are the results of the MemTest and Hard Drive diagnostics that Captain Jack asked you to run?
Those results will determine what we do next.
My System SpecsSystem Spec
07 Feb 2010   #16
WIGILOCO

Windows 7 64-bit
 
 

Memtest86+ 6 passes no errors. Now running seatools. CHKDSK /R /F runned once. HD tune said ok for every part of my hard drive. But now I run the seatools and post the results here!
My System SpecsSystem Spec
07 Feb 2010   #17
WIGILOCO

Windows 7 64-bit
 
 

7.2.2010 16:24:57
Model: ST3750528AS
Serial Number: 9VP3PWM8
Firmware Revision: CC44
Identify - Started 7.2.2010 16:24:57
Identify - Started 7.2.2010 16:24:57
Long DST - Started 7.2.2010 16:25:33
Long DST - Started 7.2.2010 16:25:33
Long DST - Pass 7.2.2010 19:27:13
Long DST - Pass 7.2.2010 19:27:16

So what do next?

The S.M.A.R.T. test passed too.
My System SpecsSystem Spec
07 Feb 2010   #18
usasma
Microsoft MVP

 
 

This really looks like a hardware error (3 memory dumps, 3 different STOP errors, and 3 different causes)

So, please try these stress tests:
But I'm not 100% sure because of the memory involvement, please try running Driver Verifier according to these instructions:
Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
If that doesn't work, post back and we'll have to see about fixing the registry entry off-line.

More info on this at this link: Using Driver Verifier to identify issues with Windows drivers for advanced users
Summary of the BSOD's:
Code:
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Feb  4 12:54:43.051 2010 (GMT-5)
System Uptime: 0 days 0:00:55.736
BugCheck 19, {3, fffffa80039612c0, bffffa80039612c0, fffffa80039612c0}
Probably caused by : Pool_Corruption ( nt!ExFreePool+536 )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
PROCESS_NAME:  WerFault.exe
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Feb  4 12:57:06.545 2010 (GMT-5)
System Uptime: 0 days 0:00:52.231
BugCheck F4, {3, fffffa80059ecb30, fffffa80059ece10, fffff80002dcb240}
Probably caused by : csrss.exe
PROCESS_NAME:  csrss.exe
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Feb  4 12:58:41.157 2010 (GMT-5)
System Uptime: 0 days 0:00:24.452
BugCheck 24, {1904fb, fffff88002f93728, fffff88002f92f80, fffff880010b4023}
Probably caused by : Ntfs.sys ( Ntfs!NtfsDeleteFcb+233 )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
PROCESS_NAME:  System
My System SpecsSystem Spec
07 Feb 2010   #19
WIGILOCO

Windows 7 64-bit
 
 

Okay furmark max temp 63c after 3 mins. And no stability issue, played like 5 hours GTA IV in one session and no bug or something. Prime95 8 hours stable. So I raised my DRAM Voltage to 1.62 from 1.6 and let's see if this helps. Some guy had the same issue that sometimes crashes in boot and that voltage thing helped him. I'll post the results.
My System SpecsSystem Spec
07 Feb 2010   #20
WIGILOCO

Windows 7 64-bit
 
 

If this comes back should I do the repair install of windows 7? Is it harmful? :O
My System SpecsSystem Spec
Reply

 BSOD again.. Minidump file check?




Thread Tools




Similar help and support threads
Thread Forum
BSOD please check my minidump file and help me
I had the BSOD problem for some time and then the problem simply stopped. I was calm for few months until today... Here's the minidump file, I hope you can help me guys. Microsoft services
BSOD Help and Support
BSOD playing Just Cause 2 minidump file uploaded! Please Check it out!
Hi there, this my first time posting in any forum related to pc problems. I hope someone can help me with my situation. I was playing Just Cause 2 and in the middle of one of the missions the computer gave me a BSOD with a code, which I didn't get the time to write it down, and then it shutdown....
BSOD Help and Support
BSOD, Check out my minidump
Hi, my computer crashed a while ago (twice actually, but only 1 dump) and I've seen nothing majorly bad so far, but I want the forums to check out the dump for me to make sure it's nothing I have to worry about.
BSOD Help and Support
Minidump folder empty after BSOD,what's to check?
Sorry if it's a dumb question,but I've already enabled small memory dump in the Startup and Recovery settings. The directory is also the default one "%SystemRoot%\Minidump. But after I crash my system with installing SPTD 1.69,the folder is always empty. I wanted to ask for help since I couldn't...
BSOD Help and Support
SERIOUS BSOD PROBLEM! Minidump check?
Hello again! I started once again my pc just ten minutes ago and bsod came on desktop.. Then computer started automatically and bsod came while loading windows. Then I shut down computer and started again and the post message said lot of things and " overclock failed ". I have never overclocked...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:14.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App