Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Please help me to read my dump files

16 Jul 2010   #31
Petey7

Windows 7 Professional SP1 64-bit
 
 

Based on past experience I believe one stick is bad. Test each stick in each slot one at a time. Hopefully it is the RAM and not a slot. If the test fails with the same stick, no matter what slot its in, its the RAM. If the test fails with both sticks, but only when in a particular slot, the slot is bad.

If it is a RAM stick, I recommend the replacement be the same speed as the good stick. Some times using two different speed sticks can cause instability, i.e. BSODs.


My System SpecsSystem Spec
.
16 Jul 2010   #32
vietnam

win 7 64 bits
 
 

Hi Tuan, Hi Petey7

I've gone to "Laptop services" (in VietNam so easy to find it, there's one near my house) to clean my 2 sticks Ram, and change their position, i.e. before ddr 2 bus 800 is the back of laptop and now it's a ddr 2 bus 667.
As your instruction, i'll run Memtest86.v4 to test each stick in each slot. I will post the result as soon as possible.

Thank you all.
My System SpecsSystem Spec
18 Jul 2010   #33
vietnam

win 7 64 bits
 
 

Hi Tuan and Petey7,

i've got another BSOD in yesterday after using my laptop from Hibernate status. So what does it means ? Always Memory problem ?
i've difficulty to test my ram because i've no experience to open my laptop, i'll go to the "laptop services" to change and test one by one.

Thanks you
My System SpecsSystem Spec
.

19 Jul 2010   #34
vietnam

win 7 64 bits
 
 

J've just got a new BSOD when using my laptop from Hibernate status.
Bug Check String : CRITICAL_OBJECT_TERMINATION
Please help me to read this dmp file.

Quang Anh
My System SpecsSystem Spec
19 Jul 2010   #35
ttran

Microsoft Window 7 Professional 32 bit
 
 

hey Quang Anh

Somehow I can see that you downgrade this drivers:
Code:
fffff880`04bda000 fffff880`04bed000   rimmpx64 rimmpx64.sys Sat Nov 18 08:49:50 2006 (455E66BE)
fffff880`04800000 fffff880`04817000   rimspx64 rimspx64.sys Thu Nov 16 16:59:50 2006 (455C3696)
fffff880`04817000 fffff880`0486e000   rixdpx64 rixdpx64.sys Sat Nov 18 11:07:46 2006 (455E8712)
explorer was crashed at the time the computer woke up from hibernation, I would recommend you to run a disk check and system file check again:
Disk Check
SFC /SCANNOW Command - System File Checker

Driver date from 2006 is usually not very stable to run, please update them to newest one
My System SpecsSystem Spec
19 Jul 2010   #36
vietnam

win 7 64 bits
 
 

Hi Tuan,

What's the name of this driver rimmpx64.sys ? How can i update this driver ?
I've a new BSOD with Bug Check String : CRITICAL_OBJECT_TERMINATION. Please help me to read this.
I'm stress with these BSODs.

Quang Anh
My System SpecsSystem Spec
19 Jul 2010   #37
ttran

Microsoft Window 7 Professional 32 bit
 
 

Hi Quang Anh,
It is your Ricoh memory card reader drivers. It was mentioned very earlier of this thread that you have this driver from 2007, I told you to update them but now it is even older (2006), please update the drivers Quang Anh, to the most of date drivers.
Another driver that I haven't seen you update:
Code:
b44amd64 b44amd64.sys Tue Nov 21 19:23:06 2006 (4562EFAA)
It is from Broadcom NDIS driver, please update it know, driver from 2006 is not running stable on window 7.
Broadcom.com - Downloads & Support

Also, please tell me the result from system file check, if it keep saying that finding error but unable to fix, you might want to do a whole system repair or clean install Quang Anh
If you have time, do this as well:
Run a Hardware Diagnostics Hardware Diagnostic !! Captain Debugger

Best,

Tuan
My System SpecsSystem Spec
25 Jul 2010   #38
vietnam

win 7 64 bits
 
 

Hi Tuan,

1.I bought a new DDR2 2gb - bus 800 for replacing one old tick with bus 677. YEah, this's the first time i've passed 7 times without errors dectected with Memtest86+. (over 9 hours to test)
I hope my BSOD caused by memory.

2.i've updated Ricoh memory card reader drivers. It's OK now.
Another driver, Broadcom NDIS driver, i can't update it. It shows always
"The best driver software for your device is already installed" or "Windows has determined the driver software for your device is up to date".
I went to Broadcom.com page - Downloads & Support, download and installed the lastest version, but nothing is updated.

3. Oh, yessss...The result from system file check, if it keep saying that finding error but unable to fix.
I've a disc named HIRRENT BOOT, i've run 2 or 3 Hard dics's programs (Samsung, seagate...) to fix it. No errors dectected when i use theses programs but when i goto cmd and run sfc /scannow, it says always that finding error but enable to fix. How can i resolve it ?

Many thanks to you, TUAN.

Quang Anh
My System SpecsSystem Spec
25 Jul 2010   #39
ttran

Microsoft Window 7 Professional 32 bit
 
 

Quote:
3. Oh, yessss...The result from system file check, if it keep saying that finding error but unable to fix.
I've a disc named HIRRENT BOOT, i've run 2 or 3 Hard dics's programs (Samsung, seagate...) to fix it. No errors dectected when i use theses programs but when i goto cmd and run sfc /scannow, it says always that finding error but enable to fix. How can i resolve it ?
Repair Install would fix it
My System SpecsSystem Spec
07 Aug 2010   #40
vietnam

win 7 64 bits
 
 

Hi Tuan,

can you help me to read my new dmp file ?

thanks

Quang Anh
My System SpecsSystem Spec
Reply

 BSOD Please help me to read my dump files




Thread Tools




Similar help and support threads
Thread Forum
BSOD dont know how to read dump files but have attached
Hi, I get random BSOD a lot since updating from 8 to 8.1. I don't know how to interpret these files, but I followed the instructions to make a zip with the diagnostics tool. I've attached this file, anyone who could help me interpret what is going wrong would be greatly appreciated. Thanks
BSOD Help and Support
BSOD when trying to Upload Documents or Read Dump Files
I'm hoping someone can help me with my problem. I have Windows 7 Home 64-bit. Whenever I try to upload a document (like an email attachment) I get the BSOD. It occurs when my document box pops up so I can select the document I want to attach. The box doesn't fully load - and BSOD. This occurs...
BSOD Help and Support
BSOD in almost every action that i do Please read these dump files
i get these Page fault error alot installed 3 months ago exactly after i biut this PC Win 7 x64 Please look into these Minidumps :cry:
BSOD Help and Support
Please help me read dump files
My computer has been experiencing BSOD lately through out this month. I have attached some files with the dumps. Please help me figure out what was the cause of the BSODs. Thank you very much in advance.
BSOD Help and Support
Can someone read my Dump files?
Hey everyone so I've been having some issues lately with my laptop bluescreening randomly. I'm running Windows 7 Ultimate x64 and can't seem to figure out what exactly is the issue with my computer. I've run chkdsk and have found no bad sectors as well as ran memtest 86 for 5 passes on each stick...
BSOD Help and Support
BSOD Please help me to read my dump files
Hello everyone, I am running Windows 7 Pro 32bit on HP and I have gotten many random BSOD's while being use on internet (play game online). I have updated lastest Windows , VGA, all driver from HP but still have BSOD. I can not read dump files. please help me Thanks
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:58.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App