Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: some BSODs just for you

16 Feb 2010   #1
The Apathetic

Windows 7 Ultimate x64
 
 
some BSODs just for you

Hello there,

Here are all the BSODs I've had since I installed this windows a few days ago..

Some of them say Memory-Corruption so that mean the ram is bad, but what about the other ones?

Btw, it's windows 7 Ultimate x86 build 7600..


My System SpecsSystem Spec
.
16 Feb 2010   #2
Jonathan_King

Windows 7 Professional x64
 
 

I had trouble loading the files in my debugger, but if you have bad memory, it can manifest itself in other ways. If the debugger points to system files and the like, it could be caused by bad RAM.

Try downloading Memtest86 and burning the ISO to a CD using ImgBurn. Boot from the CD, and run at least 5 passes.

Also, open an elevated command prompt and run sfc /scannow.
My System SpecsSystem Spec
16 Feb 2010   #3
The Apathetic

Windows 7 Ultimate x64
 
 

I already know that the ram I have is faulty, I posted here to determine if there are any other problems other than the ram..

And I ran the scannow twice over the past few days, it didn't find any corrupt files.
My System SpecsSystem Spec
.

16 Feb 2010   #4
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by The Wannabe View Post
Hello there,

Here are all the BSODs I've had since I installed this windows a few days ago..

Some of them say Memory-Corruption so that mean the ram is bad, but what about the other ones?

Btw, it's windows 7 Ultimate x86 build 7600..
All of these report memory and we cant diagnose other problems till that is fixed. when you tested the memory were all of them bad?

Ken

Code:
021610-18330-01.dmp    2/16/2010 4:12:54 PM    KERNEL_MODE_EXCEPTION_NOT_HANDLED    0x1000008e    0xc0000005    0x887ac885    0x98553a14    0x00000000    fltmgr.sys    fltmgr.sys+a885    32-bit    
021610-14227-01.dmp    2/16/2010 4:15:46 PM    BAD_POOL_HEADER    0x00000019    0x00000020    0x9f595950    0x9f595958    0x0a016000    hal.dll    hal.dll+5ba9    32-bit    
021410-32885-01.dmp    2/14/2010 1:12:01 PM    MEMORY_MANAGEMENT    0x0000001a    0x00041790    0xc080208a    0x0000ffff    0x00000000    ntoskrnl.exe    ntoskrnl.exe+b9c1d    32-bit    
021410-13790-01.dmp    2/14/2010 9:11:06 PM    MEMORY_MANAGEMENT    0x0000001a    0x00005003    0xc0802000    0x000003de    0x73f18005    ntoskrnl.exe    ntoskrnl.exe+dce10    32-bit    
020910-24975-01.dmp    2/9/2010 4:10:58 AM    MEMORY_MANAGEMENT    0x0000001a    0x00041284    0x02754001    0x00000000    0xc0802000    ntoskrnl.exe    ntoskrnl.exe+dcd10    32-bit
My System SpecsSystem Spec
16 Feb 2010   #5
The Apathetic

Windows 7 Ultimate x64
 
 

I had two memory chips, 1 was destroyed after powering the rig with a 600w OCZ PSU and the remaining 1 became faulty about 2 weeks ago.

I already purchased a new 2gig chip (haven't installed it yet), but I just wanted to make sure that there are no other problems other than my faulty ram, cause I just don't understand why it went faulty so fast, I got it only few months ago. The new chip I just bought drained every single penny I have, but at least this time it has a warranty, I'm just afraid that there might be something in my rig that is making the memory chips go faulty or something..
My System SpecsSystem Spec
16 Feb 2010   #6
Jonathan_King

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by The Wannabe View Post
I had two memory chips, 1 was destroyed after powering the rig with a 600w OCZ PSU and the remaining 1 became faulty about 2 weeks ago.

I already purchased a new 2gig chip (haven't installed it yet), but I just wanted to make sure that there are no other problems other than my faulty ram, cause I just don't understand why it went faulty so fast, I got it only few months ago. The new chip I just bought drained every single penny I have, but at least this time it has a warranty, I'm just afraid that there might be something in my rig that is making the memory chips go faulty or something..
If there was, unfortunately, we could not tell from the dmps.
My System SpecsSystem Spec
16 Feb 2010   #7
The Apathetic

Windows 7 Ultimate x64
 
 

Well, at least we tried, thank you all very much for your help :).
My System SpecsSystem Spec
Reply

 some BSODs just for you




Thread Tools




Similar help and support threads
Thread Forum
Lenovo T440s, multiple BSODs. Hardware replaced but BSODs continue
Thanks in advance for any advice. The BDODs appear to be of multiple types. Motherboard, RAM, wireless card and SSD were all replaced in early October and system completely reinstalled but BSODs continue. They are more likely to occur 1-2 min after waking from sleep, but recently also occurred...
BSOD Help and Support
please help.. BSODs :(
Hi All, I tried to do everything but I'm still getting BSODs... I uninstalled the ati driver, used also driver sweeper and installed the latest one from the official site. But it's even worse than ever before... I'm really lost and need some help. Thanks so much in advance for any comments...
BSOD Help and Support
BSODs, lots of BSODS
Hi, The blue screen of death are coming with win32k.sys, at first then irql_not_less_or_equal. I have win7 64 bit, clean installed like 1 year or so back. The dell hardware I bought was almost 2 years back but was fully replaced, motherboard, cpu except hardrive 6 months back. It is...
BSOD Help and Support
Help with BSODs
Any help is appreciated, hopefully there is data in here to determine which driver is causing the blue screens. - Windows 7 Home Premium 64bits - This PC is a little more than 1 year old, and was upgraded from a pre-installed Vista using the upgrade CDs from the manufacturer . - BSODs started...
BSOD Help and Support
BSODs FTW
Background.. built a custom PC June 14 2010.. shortly after started getting BSODs. Made sure all drivers were up-to-date.. ran several different system tests including memtest for 14 hours. No problems detected... and thats it.. file is attached per captains instructions. Ran Burnintest for 11...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:16.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App