Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 bue screen after a few minutes

17 Feb 2010   #1
danielh

 
 
Windows 7 bue screen after a few minutes

Hi,

I have a fresh install of Windows 7 ultimate 32bit that crashes with a blue screen after a few minutes on startup.

I have installed it on my new 1.5 TB Samsung hard drive.

I already have windows XP running on my older hard drive (which im running now) without any issues.

I have completed disk checks along with emmory checks and everything is in order.

Any help would be greatly appreciated.

My system specs are:

System Summary

Processor
Name : Intel Pentium III Xeon processor
Speed : 2657 MHz

Mainboard
Bus(es) : AGP PCI IMB USB i2c/SMBus
MP Support : 1 CPU(s)
MP APIC : Yes
System BIOS Version : INTEL - 22f

Video System
Monitor : Plug and Play Monitor
Adapter : NVIDIA GeForce 9600 GT

Physical Storage Device
Harddisk : ST3120827AS
Harddisk : SAMSUNG HD154UI
Harddisk : WDC WD25 00BEVS-22VAT0 USB Device
CD-ROM/DVD : ATAPI iHAS322 8
CD-ROM/DVD : ZJ5355Z DHR654S SCSI CdRom Device
CD-ROM/DVD : ZJ5355Z DHR654S SCSI CdRom Device

Logical Storage Device
(C : 111.79 GB (20.69 GB Free Space) (NTFS)
CD-ROM/DVD (D : N/A
CD-ROM/DVD (E : N/A
Media (F : 1201.95 GB (1190.37 GB Free Space) (NTFS)
OS (G : 195.31 GB (186.50 GB Free Space) (NTFS)
CD-ROM/DVD (H : 4135.42 MB (UDF)

I have attached the dump file and the error is below:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 7177

Additional information about the problem:
BCCode: a
BCP1: F2D3B9B8
BCP2: 00000002
BCP3: 00000001
BCP4: 818D3CE5
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1


My System SpecsSystem Spec
.
17 Feb 2010   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by danielh View Post
Hi,

I have a fresh install of Windows 7 ultimate 32bit that crashes with a blue screen after a few minutes on startup.

I have installed it on my new 1.5 TB Samsung hard drive.

I already have windows XP running on my older hard drive (which im running now) without any issues.

I have completed disk checks along with emmory checks and everything is in order.

Any help would be greatly appreciated.
Code:
My system specs are:

  System Summary
        
        Processor
        Name : Intel Pentium III Xeon processor
        Speed : 2657 MHz
        
        Mainboard
        Bus(es) : AGP PCI IMB USB i2c/SMBus
        MP Support : 1 CPU(s)
        MP APIC : Yes
        System BIOS Version : INTEL  - 22f
        
        Video System
        Monitor : Plug and Play Monitor
        Adapter : NVIDIA GeForce 9600 GT
        
        Physical Storage Device
        Harddisk : ST3120827AS
        Harddisk : SAMSUNG HD154UI
        Harddisk : WDC WD25 00BEVS-22VAT0 USB Device
        CD-ROM/DVD : ATAPI iHAS322   8
        CD-ROM/DVD : ZJ5355Z DHR654S SCSI CdRom Device
        CD-ROM/DVD : ZJ5355Z DHR654S SCSI CdRom Device
        
        Logical Storage Device
         (C:) : 111.79 GB (20.69 GB Free Space) (NTFS)
        CD-ROM/DVD (D:) : N/A
        CD-ROM/DVD (E:) : N/A
        Media (F:) : 1201.95 GB (1190.37 GB Free Space) (NTFS)
        OS (G:) : 195.31 GB (186.50 GB Free Space) (NTFS)
        CD-ROM/DVD (H:) : 4135.42 MB  (UDF)

I have attached the dump file and the error is below:

Problem signature:
  Problem Event Name:    BlueScreen
  OS Version:    6.1.7600.2.0.0.256.1
  Locale ID:    7177

Additional information about the problem:
  BCCode:    a
  BCP1:    F2D3B9B8
  BCP2:    00000002
  BCP3:    00000001
  BCP4:    818D3CE5
  OS Version:    6_1_7600
  Service Pack:    0_0
Product: 256_1

This crash was probably caused by memory_corruption

I would
download memtestx86 and run for 5 passes
run a system file check
(type cmd in search>right click and run as admin>sfc /scannow

If you are overclocking stop

Let us know if you need help
\
Ken



Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\K\Desktop\021710-18437-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0x81840000 PsLoadedModuleList = 0x81988810
Debug session time: Wed Feb 17 08:02:09.326 2010 (GMT-5)
System Uptime: 0 days 0:02:02.123
Loading Kernel Symbols
...............................................................
................................................................
...........
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {f2d3b9b8, 2, 1, 818d3ce5}

Probably caused by : memory_corruption ( nt!MiUnlinkFreeOrZeroedPage+c9 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: f2d3b9b8, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: 818d3ce5, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS: GetPointerFromAddress: unable to read from 819a8718
Unable to read MiSystemVaType memory at 81988160
 f2d3b9b8 

CURRENT_IRQL:  2

FAULTING_IP: 
nt!MiUnlinkFreeOrZeroedPage+c9
818d3ce5 834c0804ff      or      dword ptr [eax+ecx+4],0FFFFFFFFh

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  INTEL_CPU_MICROCODE_ZERO

BUGCHECK_STR:  0xA

PROCESS_NAME:  System

TRAP_FRAME:  88a33a24 -- (.trap 0xffffffff88a33a24)
ErrCode = 00000002
eax=7033b9b4 ebx=0000006b ecx=82a00000 edx=837c186e esi=82d3c7b4 edi=837c185c
eip=818d3ce5 esp=88a33a98 ebp=88a33abc iopl=0         nv up ei pl nz ac po nc
cs=0008  ss=0010  ds=0023  es=0023  fs=0030  gs=0000             efl=00010212
nt!MiUnlinkFreeOrZeroedPage+0xc9:
818d3ce5 834c0804ff      or      dword ptr [eax+ecx+4],0FFFFFFFFh ds:0023:f2d3b9b8=????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from 818d3ce5 to 818867eb

STACK_TEXT:  
88a33a24 818d3ce5 badb0d00 837c186e 9e90aa98 nt!KiTrap0E+0x2cf
88a33abc 818cc4bf 0001d96b 00000000 8540c468 nt!MiUnlinkFreeOrZeroedPage+0xc9
88a33b20 818d4273 0000006b 00000000 00000000 nt!MiRemoveAnyPage+0x41d
88a33b48 8186e881 0000006b 00000000 838e9628 nt!MiGetPage+0x28a
88a33be0 81a5260f 838e9628 00000001 00060000 nt!MiPfPutPagesInTransition+0x3eb
88a33c08 8186623f 00140000 00000000 00060000 nt!MmPrefetchForCacheManager+0x83
88a33ca8 818e0eff 83954bf0 acc6f08e 8385c050 nt!CcPerformReadAhead+0x19f
88a33d00 818adf2b 8385c050 00000000 83864210 nt!CcWorkerThread+0x18d
88a33d50 81a4e66d 00000000 acc6f01e 00000000 nt!ExpWorkerThread+0x10d
88a33d90 819000d9 818ade1e 00000000 00000000 nt!PspSystemThreadStartup+0x9e
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x19


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!MiUnlinkFreeOrZeroedPage+c9
818d3ce5 834c0804ff      or      dword ptr [eax+ecx+4],0FFFFFFFFh

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!MiUnlinkFreeOrZeroedPage+c9

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP:  4a5bc007

IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  0xA_nt!MiUnlinkFreeOrZeroedPage+c9

BUCKET_ID:  0xA_nt!MiUnlinkFreeOrZeroedPage+c9

Followup: MachineOwner
---------
My System SpecsSystem Spec
13 Jan 2012   #3
DamageSam

Windows 7 Build 7100 32-bit
 
 
bsod

Hi, im sitting with this problem:

After a few minutes of playing Battlefield 3 Online i get a BSOD. Now i saw that some believe that it is hardware related, but if i play any other game (eg Driver SF) this does not happen. Only with BF3

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 7177

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA80082508F8
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\011312-20623-01.dmp
C:\Users\Damage Sam\AppData\Local\Temp\WER-46987-0.sysdata.xml

Any help will be appreciated greatly.
My System SpecsSystem Spec
.

Reply

 Windows 7 bue screen after a few minutes




Thread Tools




Similar help and support threads
Thread Forum
8 MINUTES 15 SECONDS in Starting Windows Screen
It is taking 8 MINUTES 15 SECONDS in Starting Windows Screen. I have run Chkdsk on all partitions and it found errors and fixed them. Running it again and it boots to chkdsk but it takes that amount of time to get there. I have run virus chks, looked at what is in startup, run an error chk on...
General Discussion
Clean installation of Windows 7 64bit, Black Screen Hand for 2 minutes
Hi, I ran my computer for about 2 days with the clean installation of Windows on my SSD and it was running fine. Now whenever I start up my computer after the Starting Windows Logo, my screen hangs on a black screen for around 1-2mins without a cursor, and then proceeds to the Welcome screen,...
General Discussion
Black Screen after Windows Logo - waits 2 minutes, then able to login
HI everyone I am a noob here, so firstly can I say thanks in advance for any help you can give me on a frustrating problem. I also hope this is in the right place as it's not Blue screen, it's a black screen! My System - custom build, Intel Core i5 760 @ 2.8GHz, DDR3 SDRAM, Windows 7 x64...
BSOD Help and Support
Blue Screen Every 20 Minutes
Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional information about the problem: BCCode: 1000007e BCP1: FFFFFFFFC0000005 BCP2: FFFFF8800587CFC9 BCP3: FFFFF880097ED848
BSOD Help and Support
Sound goes off after 10 minutes, with screen
Hi All: I have searched everywhere, but can't find anything like this: here's my issue: Windows 7 turns off all sounds after about 10 minutes. Together with display. Now, here's my configuration: Windows 7, 64 bit pro. Dual display: dell 1907 and Samsung syncmaster
Sound & Audio
Screen goes black after 10 minutes - HELP please
Have a new HP 300 Touchsmart computer ( less than a week old ) and I have disabled the screensaver thinking it would solve the problem I am having , but the problem still exists . While I am watching a Youtube or other video the screen will dim slightly and a few minutes later go black . If I move...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:03.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App