Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD - EVENT 41 after CPU upgrade

24 Feb 2010   #11
Mayotruck

Windows 7 Utimate 64bit edition
 
 

you could even run sandrasoft if you perfer but whats the cpus under 100% load temps hitting


My System SpecsSystem Spec
.
24 Feb 2010   #12
biosol

Windows 7 64-bit
 
 

Ok, it's running. 55-58 on 3 cores. 1 core is not used prime said error.
My System SpecsSystem Spec
24 Feb 2010   #13
Mayotruck

Windows 7 Utimate 64bit edition
 
 

temp are fine then.

update your bois. Then try a memtest83
My System SpecsSystem Spec
.

24 Feb 2010   #14
Mayotruck

Windows 7 Utimate 64bit edition
 
 

On Thu 2/25/2010 2:38:25 AM your computer crashed
This was likely caused by the following module: win32k.sys
Bugcheck code: 0x50 (0xFFFFF901C065A778, 0x0, 0xFFFFF960001AA805, 0x5)
Error: PAGE_FAULT_IN_NONPAGED_AREA
Dump file: C:\Windows\Minidump\022410-34772-01.dmp
file path: C:\Windows\system32\win32k.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Multi-User Win32 Driver
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit may be another driver on your system which cannot be identified at this time.

My System SpecsSystem Spec
24 Feb 2010   #15
biosol

Windows 7 64-bit
 
 

On the MB Bios page there is an update last 11/09. Here's the description - Fix DES version error Would that help?

And I'm running Prime again. This time all 4 cores working @ 100%. It took 17 minutes until Core #0 hit 70c, the other 3 right 63-66, Core #0 67/68 hit 69 a couple times and came down, then finally hit 70 so I stopped the test.

What does that say about the HSF/CPU connection and the RAM?
My System SpecsSystem Spec
24 Feb 2010   #16
Mayotruck

Windows 7 Utimate 64bit edition
 
 

it might, and updating your bois many times will fix errors(but then agian sometime it will not hah)

I would install it. upgrades are good XD

As for will it fix your problem not for sure no. but if you do update ypur bois make sure you are ready with a backup bois disk (google it) just incase something goes wrong.

I would update to the newest version and then check system stabilty...go play a game or run passmark benchmark.(google)

I was initially thinking it was temps because you recently re-seated your core... your temps seem fine but if you are leary just look up your processor and check it against other people's temps.. the max for your processor is 100 so, if you can hold prime for 20 minutes your pretty good.

but yah upgrade your bois. rember to have a backup ready unless you have duel bois but a backup is something you should have anyways ...just incase.
My System SpecsSystem Spec
24 Feb 2010   #17
Mayotruck

Windows 7 Utimate 64bit edition
 
 

try lowering your memory speed (133Mhz worked for me) or try switching RAM Dimms/Simms. There errors are usually symptoms of memory problems. Also try to test you RAM using memtest-86 (Memtest86.com - Memory Diagnostic), it found some errors while my RAM was using a higher clock speed but none with my current 133Mhz.

If you look back at the diagnostics earlier just click on the link

This was likely caused by the following module: win32k.sys

If you click the win32k. it will bring you to google. and read there are lotrs of people having the same issues. If you have done anyhting to your ram lately reset it to to stock..

I actually had a simular issue so I pulled out my ram and moved them around from slot a to b and b to c and c to a.. upgraded bois and my problems went away..

it apears to be ram but I think windows 7 has some issues with ram which haven't been fixed yet.. because this is VERY common..click the link and read what your dump file told yah

btw I use
a program called whocrashed(google) to read the dump files... its super easy 1 button

and its free.. i highly recoommned it

My System SpecsSystem Spec
24 Feb 2010   #18
biosol

Windows 7 64-bit
 
 

What do you mean by 133Mhz for the RAM? It's on auto now at 1066 I believe.

Actually cpu-z says DRAM Freq. is 533. Yeah, that's 1066.

Update: Ok, I just turned it down to 800.
My System SpecsSystem Spec
24 Feb 2010   #19
Mayotruck

Windows 7 Utimate 64bit edition
 
 

the 133 mhz ram thing was just cut and pasted from a forum i read about this error..
but i did have this issue and it was from playing around with my ram settings in cmos.if you set to stock and reset your bois. (upgrade as well) your problems might stop that what i did.
My System SpecsSystem Spec
24 Feb 2010   #20
biosol

Windows 7 64-bit
 
 

Ok, thanks a lot. I'm going to wait on the bios and cross my fingers turning down the RAM speed fixes it. Plus I have to record with WMC American Idol for my wife right now for the next two hours...
My System SpecsSystem Spec
Reply

 BSOD - EVENT 41 after CPU upgrade




Thread Tools




Similar help and support threads
Thread Forum
BSOD on Shutdown Event Log = Kernel-Processor-Power. Event ID: 6
Hi all, I've just built an AcerPower F6 desktop to Win 7 Pro 32 every shutdown it shows BSOD and promptly restarts. Event log is showing me the following for a critical event at the same time the shutdown occurs (The date on the log is from a week ago but this happens every shutdown which...
BSOD Help and Support
BSOD when watching videos on youtube, Event 41 in Event Viewer
It's been a while since I've experienced a BSOD as I'm viewing a video on youtube. It would freeze as if the audio was caught in mid-stream then BSOD, then would restart automatically. I go to Event Viewer after windows as loaded and I see Event 41 Kernel-Power in there. I had this issue...
BSOD Help and Support
After BSOD Event Viewer Logs Event ID 3012 and 3011 every time I boot
I was running 3DMark06 and got a BSOD code 124. After that every time I boot Event Viewer logs Error Codes ID 3012 and 3011. Attached are screenshots of both. I googled this and found two different threads where someone suggested to rebuild the performance counters. Both responses were...
BSOD Help and Support
BSOD After SSD upgrade and Ram upgrade in Laptop. Mostly IRQL errors
Like the title said, I'm getting random BSOD after upgrading to SSD and RAM. Initially I thought it was the Intel Rapid Technology, because the system improved after I've installed. But now it still BSOD, but less frequent. Here are my dump files and jcgriff2 files Minidump.7z ...
BSOD Help and Support
Event 1001 BugCheck Event 41 Kernel-Power Event 4 k57nd60a
Alright, started getting the 1001 BugCheck crash with Event 41 Kernel-Power BSOD a few times not long ago, widely spaced out incidents (it will lock up, make a very weird repetitive noise through my stereo speakers and will also get black and white bars across the screen before the blue screen...
BSOD Help and Support
WHEA-Logger event 18/19 errors in Event Viewer (W7 Home Premium)
Hi, I was hoping somebody could offer an insight on the below, as searching around I've not found much to go on other than "overheating" Basically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words)...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 04:25.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App