Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BlueScreen Page_Fault only on Cold Boot

26 Feb 2010   #1
JohnPC

Triple Boot - Win 7 x64 Ultimate x2 + WinXP-mce x1
 
 
BlueScreen Page_Fault only on Cold Boot

Hello,

I'm new to the 7 forum, though I have been reading the posts now for several weeks now and have found them to be really helpful. Thanks!

I've been tinckering with my new Win 7 -64bit self-built machine, and I have to say that I haven't felt this excited about a new computer since my first encounter with a TRS-80-2...
Anyhow, I've had a consistant pattern of BlueScreen Page_Fault errors, and I'm very lost. Once the system reboots after the first crash, it runs excellent from that point on...

I downloaded the Win7 debugging tools/symbol sets thinking that I might fumble my way through them, but they are way over my head... So, I have attatched the mini dump files with the hope that someone might have an idea as to how I should go forth from this point.

Regards,
John


My System SpecsSystem Spec
.
26 Feb 2010   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by JohnPC View Post
Hello,

I'm new to the 7 forum, though I have been reading the posts now for several weeks now and have found them to be really helpful. Thanks!

I've been tinckering with my new Win 7 -64bit self-built machine, and I have to say that I haven't felt this excited about a new computer since my first encounter with a TRS-80-2...
Anyhow, I've had a consistant pattern of BlueScreen Page_Fault errors, and I'm very lost. Once the system reboots after the first crash, it runs excellent from that point on...

I downloaded the Win7 debugging tools/symbol sets thinking that I might fumble my way through them, but they are way over my head... So, I have attatched the mini dump files with the hope that someone might have an idea as to how I should go forth from this point.

Regards,
John

Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS

Given memory is the first likely cause
I would
download memtestx86 and run it for 5 passes

run a system file check
type cmd in search>right click and run as admin>SFC /SCANNOW

let us know the results

Ken



Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\K\Desktop\022610-30716-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`03011000 PsLoadedModuleList = 0xfffff800`0324ee50
Debug session time: Fri Feb 26 16:22:20.075 2010 (GMT-5)
System Uptime: 0 days 0:00:51.371
Loading Kernel Symbols
...............................................................
................................................................
.........................................................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffffa2108f10ca0, 0, fffff800033708af, 7}


Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt!NtCreateSection+17e )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffffa2108f10ca0, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff800033708af, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 0000000000000007, (reserved)

Debugging Details:
------------------


Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032b90e0
 fffffa2108f10ca0 

FAULTING_IP: 
nt!NtCreateSection+17e
fffff800`033708af 4c396640        cmp     qword ptr [rsi+40h],r12

MM_INTERNAL_CODE:  7

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x50

PROCESS_NAME:  WerFault.exe

CURRENT_IRQL:  0

TRAP_FRAME:  fffff88002a569a0 -- (.trap 0xfffff88002a569a0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff8a005255660 rbx=0000000000000000 rcx=fffff8a004cdc820
rdx=ffffffdffd801390 rsi=0000000000000000 rdi=0000000000000000
rip=fffff800033708af rsp=fffff88002a56b30 rbp=fffff88002a56ca0
 r8=0000000000000000  r9=0000000000000000 r10=0000000000000000
r11=fffff8a005255660 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na po nc
nt!NtCreateSection+0x17e:
fffff800`033708af 4c396640        cmp     qword ptr [rsi+40h],r12 ds:00000000`00000040=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80003100b19 to fffff80003082f00

STACK_TEXT:  
fffff880`02a56838 fffff800`03100b19 : 00000000`00000050 fffffa21`08f10ca0 00000000`00000000 fffff880`02a569a0 : nt!KeBugCheckEx
fffff880`02a56840 fffff800`03080fee : 00000000`00000000 00000000`00000000 fffffa80`00000000 fffff8a0`05255678 : nt! ?? ::FNODOBFM::`string'+0x40edb
fffff880`02a569a0 fffff800`033708af : fffff880`02a56b80 00000000`00000000 00000000`00000000 fffffa80`08f10c98 : nt!KiPageFault+0x16e
fffff880`02a56b30 fffff800`03082153 : fffffa80`09070060 00000000`0010a118 fffff880`02a56bc8 00000000`00000000 : nt!NtCreateSection+0x17e
fffff880`02a56bb0 00000000`60402e3d : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0010a0f8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x60402e3d


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!NtCreateSection+17e
fffff800`033708af 4c396640        cmp     qword ptr [rsi+40h],r12

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  nt!NtCreateSection+17e

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  4a5bc600

FAILURE_BUCKET_ID:  X64_0x50_nt!NtCreateSection+17e

BUCKET_ID:  X64_0x50_nt!NtCreateSection+17e

Followup: MachineOwner
---------
My System SpecsSystem Spec
26 Feb 2010   #3
JohnPC

Triple Boot - Win 7 x64 Ultimate x2 + WinXP-mce x1
 
 

Hi Ken,
I just updated to MemTest 3.4 (I had a very old version 1.6) and I'm about to boot off a CD to run the test.
I have tried running " SFC/ SCANNOW" before, but all I get is a CMD prompt window which stays open about 1/2 second with no other dialogs... so I'm not sure if it's working or if I am missing something.
I'll post an update on MemTest as soon as I get something.
Thanks,
John
My System SpecsSystem Spec
.

28 Feb 2010   #4
JohnPC

Triple Boot - Win 7 x64 Ultimate x2 + WinXP-mce x1
 
 

Ken,
Well, I managed to do a SFC scan and it did reveal some corrupted files which it couldn't fix :-(
On the other hand, the good news is that the MEMTEST in 3.4 mode went through without a glitch, showing no errors.

In the mean time, I also tried something else. I backed up my current install and tried to start from scratch with a fresh one. The SFC on the new one revealed no errors present, the MEMTEST was fine, but I still got a critical error in the event log and a BlueScreen which only happened on the first ColdBoot this morning.
Besides this issue, everything is working so excellently (Amiga Forever/ WinXP Mode too) that I guessing I'll just have too live with it for now...
Thanks for the input,
John
My System SpecsSystem Spec
28 Feb 2010   #5
win7clutz

Windows 7 Ultimate (64)
 
 

Since it appears that mem is not the issue, might want to talk to the SSD manufactures and see if there's a firmware upgrade for those drives...
My System SpecsSystem Spec
28 Feb 2010   #6
JohnPC

Triple Boot - Win 7 x64 Ultimate x2 + WinXP-mce x1
 
 

Thanks, I'll check up on that too.
It seems OCZ updates their firmware often.

Updated:
My OCZ is running the latest firmaware 1.5,
and my Kingston is so new, that there is nothing available yet.
So I'm assuming that is not the issue.
My System SpecsSystem Spec
Reply

 BlueScreen Page_Fault only on Cold Boot




Thread Tools




Similar help and support threads
Thread Forum
windows boot error only in cold boot
So, i recently formatted the pc, Im getting this weird error from windows boot every time i do a cold boot (meaning turning the pc on), if I just reset the pc i dont get the error. Is weird because previous to this error, before formatting, i was getting a different boot error also only on cold...
General Discussion
PC will not cold boot but ok on restart.
Hello. 8 days ago i turned on the pc and then my a cup of tea. When i came back the pc had a flashing cursor in the top left screen. I turned it off and then on and then it went as far as the windows progress flash screen and stopped so i rebooted again and after nearly an hour of this i got it...
General Discussion
Random Freezing/BSOD, Boot Disk Failure, OK Cold Boot then Repeat
Yesterday Windows Explorer began to stop responding fairly frequently, but would restart itself without issue and continue to run fine. Today, Windows now freezes completely every 45ish minutes - usually a random program stops responding followed by everything, the mouse gets stuck,...
BSOD Help and Support
Cold boot problems
I have system stability problems for a long time. I always thought it was my TV tuner card, but now that I have it removed, the problems still persist. Problem: The system can run fine for some days (in which I boot up every morning), and suddenly be heaviliy instable on some days: black screen...
Hardware & Devices
BSOD only on cold boot
Hi everyone, new to the forums so go easy on me :D. I have read about a half dozen similar threads and still have yet to find a solution. I've been an avid computer person who puts together systems in his spare time, and have never seen this problem before. What is happening is each cold...
BSOD Help and Support
BSOD KSOD No Boot Win7 64bit Cold Boot
I'm at my wits end... The problem: First installed Windows 7 Proff 64-bit on this machine last monday after installing updates / drivers etc I began to recieve intermitent BSODs then began the trouble shooting. Tested memory with memtest86+ passed manually set voltages / timings ran...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:21.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App