Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Window 7 x64 BSODs on newly built computer

02 Mar 2010   #1
jl3nz

Windows 7 x64
 
 
Window 7 x64 BSODs on newly built computer

So, I have recently built a new computer over the holidays and I am running into some issues with BSODs. I am trying to narrow down the culprit and resolve the issues. Initially, the main problem I was having was with my XFX Radeon 5770, but XFX has released updated drivers. I have updated all my drivers... that I know of, but I am still getting BSODs. I have included the most recent BSODs so someone could take a look and maybe shed some light on my issues. Any help or suggestions would be greatly appreciated.



My System SpecsSystem Spec
.
02 Mar 2010   #2
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Quote   Quote: Originally Posted by jl3nz View Post
So, I have recently built a new computer over the holidays and I am running into some issues with BSODs. I am trying to narrow down the culprit and resolve the issues. Initially, the main problem I was having was with my XFX Radeon 5770, but XFX has released updated drivers. I have updated all my drivers... that I know of, but I am still getting BSODs. I have included the most recent BSODs so someone could take a look and maybe shed some light on my issues. Any help or suggestions would be greatly appreciated.

Hello Welcome to SF,

I guess it's pointing to a Core Windows driver Cryptography Next Generation (cng.sys)


CNG provides a set of APIs that are used to:
  • Perform basic cryptographic operations, such as creating hashes and encrypting and decrypting data.
  • Create, store, and retrieve cryptographic keys.
  • Install and use additional cryptographic providers.
So long story short its related to your security. More info refer this link Cryptography Next Generation

Run the Memory Diagnostic & HD Diagnostic.

Download Malwarebytes and run a complete scan


PAGE_FAULT_IN_NONPAGED_AREA (50)
Quote:
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff800009ea060, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80003067b5c, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000000, (reserved)



Hope this helps,
Captain
My System SpecsSystem Spec
03 Mar 2010   #3
jl3nz

Windows 7 x64
 
 

Thanks Capt. for the help. Last night I ran Memtest 86+ for 5 pass' without any errors. I ran the HD Diagnostics extended test as well and passed without errors. As for those tests, I didn't have any problems. I downloaded Malwarebytes and started a "complete scan" and then went to bed. (it was late by this time) The computer had a BSOD last night sometime so I started another scan this morning... same thing, but different BSOD. I will run Malwarebytes again tonight when I get home from work, but could you take a look at my newest addition to my BSOD collection and let me know what you thing?
My System SpecsSystem Spec
.

03 Mar 2010   #4
jl3nz

Windows 7 x64
 
 

Anyone have an idea what to try next?
My System SpecsSystem Spec
04 Mar 2010   #5
jl3nz

Windows 7 x64
 
 

Ok, so I was able to run Malwarebytes and it did find a "hacked.displayproperties" in the registry. While trying to run Malwarebytes I did receive a few BSODs and I am wondering if the ATI Catylist software is causing issues. Can someone take a look at these BSODs and let me know what they find?
My System SpecsSystem Spec
04 Mar 2010   #6
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Quote   Quote: Originally Posted by jl3nz View Post
Ok, so I was able to run Malwarebytes and it did find a "hacked.displayproperties" in the registry. While trying to run Malwarebytes I did receive a few BSODs and I am wondering if the ATI Catylist software is causing issues. Can someone take a look at these BSODs and let me know what they find?
Sorry for the late replay i was kinda busy lately. OK i guess its time to Run the Driver verifier follow this link Using Driver Verifier to identify issues with Drivers

Good Luck,
Captain
My System SpecsSystem Spec
05 Mar 2010   #7
jl3nz

Windows 7 x64
 
 

Ok, I ran Driver Verifier last night to see what was up. I did receive a few BSODs. It's hard to know what is causing the BSODs, but I have a feeling it is video card related. I have attached to BSODs. Also, while verifier was "on"... my video would "freak out" and I would get the error "The ATI Display Drivers Have Stopped Working But Has Recovered..." or something like that. This happened quite a bit while verifier was turned on.

I also tried running WEI to see if I could get something to happen. Which it did... I wouldn't give me a reading. It would error out. I also ran the SFC /scannow. There was a file that I couldn't repair, but I have no clue what to do with it. From the CBS.log file, I was able to extract the files that it repaired and couldn't repair. Let me know your thoughts... Thanks!
My System SpecsSystem Spec
08 Mar 2010   #8
jl3nz

Windows 7 x64
 
 

Does anyone have any suggestions as to what I can try?
My System SpecsSystem Spec
08 Mar 2010   #9
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

You've received some excellent suggestions so far, but I'll attack this from the same approach that has been used thru all computer generations.
Nr 1 suspect: video driver,
Nr 2 suspect: video card (sometimes these two are reversed but still tops of list)
Nr 3 suspect: ram (incorrect type, speed, or not all from same manufacturer)
Nr 4 suspect: defective/temperamental power supply
Nr 5 suspect: heat (inadequate ventilation, fan not working, fan loose)
Nr 6 suspect: mains (the power from the wall)

Review following:
Why is my screen black when I start Windows 7?
My System SpecsSystem Spec
08 Mar 2010   #10
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Quote   Quote: Originally Posted by jl3nz View Post
Ok, I ran Driver Verifier last night to see what was up. I did receive a few BSODs. It's hard to know what is causing the BSODs, but I have a feeling it is video card related. I have attached to BSODs. Also, while verifier was "on"... my video would "freak out" and I would get the error "The ATI Display Drivers Have Stopped Working But Has Recovered..." or something like that. This happened quite a bit while verifier was turned on.

I also tried running WEI to see if I could get something to happen. Which it did... I wouldn't give me a reading. It would error out. I also ran the SFC /scannow. There was a file that I couldn't repair, but I have no clue what to do with it. From the CBS.log file, I was able to extract the files that it repaired and couldn't repair. Let me know your thoughts... Thanks!
Hello,

Sorry for delayed replay was busy with lot of things.
OK i ran the Dump its poiniting to your Hard Drive it happen while running Windows Shadow Copy. So Run HD Diagnostic.

Good Luck,
Captain
My System SpecsSystem Spec
Reply

 Window 7 x64 BSODs on newly built computer




Thread Tools




Similar help and support threads
Thread Forum
Newly Built Computer, CPU temperature really low
I have just recently built a computer. There was a problem with it and my friend and I had to trouble shoot it. When trouble shooting, we had to remove the CPU, ruining the heat paste. We have recently just reapplied the heat paste using the pea method. The only concern I have is that when I use...
Hardware & Devices
x0a xc9 bsods on a newly built pc
So I just bought and assembled a new pc. Everything new. Have been having bsods since the beginning. Also windows updates keep failing. Specifically sp1. Attached is the dump files. Thanks in advance!:D
BSOD Help and Support
Random BSODs on newly built machine, all details inside
Hello all, As the title says I've been having random BSODs on my newly built machine. Mostly happens on startup, can't get passed the Windows Splash screen when it blue screens. All voltages check out in the BIOS, and memtest returns negative. I'm running a fresh genuine installation of...
BSOD Help and Support
Newly built computer with BSOD, please help!
Hey everybody, I've been putting together a new computer for the past 2 weeks, and I've been getting the BSOD and I don't know why. It might be because of the cpu cooling or memory or the psu. I've changed the psu from 600w to 800w but I'm still getting the bs. I'm currently using the stock...
BSOD Help and Support
Need help with newly built computer! BSODs when playing games
old
BSOD Help and Support
Need help with newly built computer!
Hey there I recently put together my computer for a better gaming experience and I don't know whats going on but something somewhere is going wrong. Everytime I try to play a game like starcraft 2 or star wars the old republic I get a blue screen and a get a 0x0000016 error. Also I got a weird...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 19:20.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App