Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD After Awaking from Sleep

03 Mar 2010   #1
jeffreyabr

Windows 7
 
 
BSOD After Awaking from Sleep

I am running window 7 ultimate 64bit on my dell vostro 1520. recently, i have shut my laptop only to open it to a BSOD after it loads the login screen. it then restarts and says nothing about having crashed. only once has it restarted asking if i wanted to try and boot from that resume data or delete it and start again. I looked to this thread for reference:

https://www.sevenforums.com/crashes-d...ter-sleep.html

but when I tried to get a minidump after a crash there was nothing in the folder when i rebooted. Do I need to start the computer in safe mode to get it or should I be fine booting up regularly? Is there something else that I should be doing?



My System SpecsSystem Spec
.
03 Mar 2010   #2
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Quote   Quote: Originally Posted by jeffreyabr View Post
I am running window 7 ultimate 64bit on my dell vostro 1520. recently, i have shut my laptop only to open it to a BSOD after it loads the login screen. it then restarts and says nothing about having crashed. only once has it restarted asking if i wanted to try and boot from that resume data or delete it and start again. I looked to this thread for reference:

https://www.sevenforums.com/crashes-d...ter-sleep.html

but when I tried to get a minidump after a crash there was nothing in the folder when i rebooted. Do I need to start the computer in safe mode to get it or should I be fine booting up regularly? Is there something else that I should be doing?
Hello,

Lets enable the MiniDump
  1. Click Start, point to Settings, and then click Control Panel.
  2. Double-click System.
  3. Click the Advanced tab, and then click Settings under Startup and Recovery.
  4. In the Write debugging information list, click Small memory dump (64k).

    To change the folder location for the small memory dump files, type a new path in the Dump File box
The follow this link to post dump file https://www.sevenforums.com/crash-loc...d-problem.html

Hope this helps,
Captain
My System SpecsSystem Spec
03 Mar 2010   #3
jeffreyabr

Windows 7
 
 

Thanks Captain. I will upload a minidump when it happens next.
My System SpecsSystem Spec
.

03 Mar 2010   #4
jeffreyabr

Windows 7
 
 

I must be doing something wrong or have some setting incorrect because I have had two different crashes and no minidump files created.

The first crash occurred when I simply started scrolling down a new page in Firefox. My screen went black and the laptop began to reboot. There was no blue screen, just black.

The second one was a BSOD. I had closed my laptop with firefox and word open and came back maybe an hour later. The power LED was still blinking, so it hadn't gone into hibernate yet. When I opened my laptop, the login screen loaded fully for maybe two seconds, but before I could sit down the BSOD flashed on the screen and my computer began to reboot.

What's weird is that my machine doesn't seem to realize that it's crashed when it reboots. There is no Windows message that pops up upon restart that says it will send Microsoft an error message or anything. This whole thing started maybe three days ago, and I haven't installed anything new since then. I have run multiple virus scans with AVG Free and a Chkdsk, but these didn't solve it.
My System SpecsSystem Spec
04 Mar 2010   #5
jeffreyabr

Windows 7
 
 

Should I be doing this a different way? Is there another place I should be looking for it? I am in C:\Windows\Minidump which matches the directory that's told in the Small dump Directory. I see that it should also be writing an event to the system log, is there a place I can access that and post that?
My System SpecsSystem Spec
04 Mar 2010   #6
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

OK Run this Tool SF Diagnostic Tool and post us the results. Make sure you right click and Run as administrator !!

- Captain
My System SpecsSystem Spec
04 Mar 2010   #7
jeffreyabr

Windows 7
 
 

Here is a copy of the Event Log on my computer.
My System SpecsSystem Spec
04 Mar 2010   #8
jeffreyabr

Windows 7
 
 

And here's the SF Diagnostic Tool output.
My System SpecsSystem Spec
04 Mar 2010   #9
jeffreyabr

Windows 7
 
 

Can you find anything in either of those two which reveals the issue?
My System SpecsSystem Spec
04 Mar 2010   #10
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Quote   Quote: Originally Posted by jeffreyabr View Post
And here's the SF Diagnostic Tool output.
Hello,

Lot of issues actually. Here is the Logs what it says

Old Drivers

Code:
adfs         adfs                   Kernel        11/3/2008 11:48:14 AM 
adp94xx      adp94xx                Kernel        12/5/2008 6:54:42 PM 
adpahci      adpahci                Kernel        5/1/2007 1:30:09 PM   
adpu320      adpu320                Kernel        2/27/2007 7:04:15 PM 
arc          arc                    Kernel        5/24/2007 5:27:55 PM 
BrFiltLo     Brother USB Mass-Stora Kernel        8/6/2006 9:51:06 PM
ebdrv        Broadcom NetXtreme II  Kernel        12/31/2008 11:29:28 AM
LSI_FC       LSI_FC                 Kernel        12/9/2008 5:46:09 PM 
nfrd960      nfrd960                Kernel        6/6/2006 5:11:48 PM 
OEM13Vfx     Creative Camera OEM013 Kernel        3/5/2007 5:55:47 AM   
OEM13Vid     Creative Camera OEM013 Kernel        5/28/2008 9:19:21 PM  
pcouffin     VSO Software pcouffin  Kernel        12/5/2006 9:39:30 AM  
PxHlpa64     PxHlpa64               Kernel        12/10/2007 6:49:01 PM 
SMSIVZAM5X64 SMSIVZAM5X64 NDIS Prot Kernel        10/7/2008 12:56:59 PM 
SiSRaid2     SiSRaid2               Kernel        9/24/2008 2:28:20 PM  
SiSRaid4     SiSRaid4               Kernel        10/1/2008 5:56:04 PM 
SynTP        Synaptics TouchPad Dri Kernel        6/20/2008 7:06:00 PM
usbbus       LGE CDMA Composite USB Kernel        11/11/2008 4:15:45 AM 
USBModem     LGE CDMA USB Modem     Kernel        11/11/2008 4:16:17 AM
Make sure you find the most updated drivers for the above list.

Device that can cause problem

Code:
Mass Storage Controller PCI\VEN_1217&DEV_8130&SUBSYS_02BC1028&REV_01\4&12BF0147&0&02E4  The drivers for this device are not installed.
I guess it's some USB drive or External HDD might also has issues. There is no proper drivers installed.

Event Viewer Log


Installation of the Proof of Purchase failed. 0xC004F015
Partial Pkey=Y8QH3
ACID=bfb30674-7c9a-4624-9309-9914cfd5b05c
Detailed Error[?]

Info from Genuine Windows Blog - The Windows Blog

Using KMS in Windows 7 or Windows Server 2008 R2 deployments

One of the more common questions that we are hearing about volume activation today is around how to update your existing Key Management Service (KMS) to support Windows 7 and/or Windows Server 2008 R2. This is also causing some customers issues as they attempt to use the new keys that are available on the Volume License Service Center and get a 0xC004f050 or 0xC004F015 errors, as shown here:




Why is this happening, and how can it be resolved?
With each release of Windows, Microsoft will issue new product keys. This is true for volume license customers as well. In order for this key to be recognized on an earlier release of Windows, it is necessary to update the license files that are used by the software license service. This is easy to do and only takes a little time to accomplish.
KMS hosted on Windows Server 2003
If you are hosting the KMS on Windows Server 2003 today, you are probably running the version 1.1 that supports both Windows Vista and Windows Server 2008 KMS keys and clients. In order to add support for Windows 7 and Windows Server 2008 R2, you’ll need to install the update found in KB 968195. The steps to install are clearly defined in the KB. Don’t forget to restart the service after the update is installed. This is a very important step because the license files won’t be installed until after the reboot. Read Updating KMS on Windows Server 2003 to support Windows 7 and Windows Server 2008 R2 for additional information.
After the update is installed (and the system is restarted), you can install the new KMS host key (for Windows 7 or Windows Server 2008 R2) using slmgr.vbs /ipk, and then activate the service using slmgr.vbs /ato. The DNS records will be refreshed and the count on the KMS host is maintained. The entire process is transparent to the KMS client systems.
KMS hosted on Windows Server 2008 (and Windows Vista)
A similar update exists for Windows Server 2008. KB 968912 has the update and clearly defined steps to follow to update the KMS host. After the update is installed (and the system is restarted), you can install the new KMS host key (for Windows 7 or Windows Server 2008 R2) using slmgr.vbs /ipk, and then activate the service using slmgr.vbs /ato. The DNS records will be refreshed and the count is maintained.
Keep in mind that the most common issue that customers are having while resolving the above is that they do not restart the system before attempting to install the new KMS host key. Without the restart, the new key will not be recognized and you will get the same error I mentioned at the beginning of the blog (0xC004F015).

Hope this helps,
Captain
My System SpecsSystem Spec
Reply

 BSOD After Awaking from Sleep




Thread Tools




Similar help and support threads
Thread Forum
Numerous BSOD's. Normally caused while in sleep / putting to sleep.
Hello Seveners! I have been having trouble with a BSOD for a while now. It is getting to that extent that I bare it any longer! I need help! Firstly, these BSOD's have been happening randomly, but normally the case is while it is in sleep, or when I put it to sleep, the screen will go black,...
BSOD Help and Support
BSOD - Won't sleep or crashes during sleep on Dell Latitude 6430u
Hi, I have a Dell Latitude 6430u running windows 7 64. When I first got it I worked through many BSOD issues and it was running fine for many many months. Now recently it started not sleeping, waking up by itself during sleep and waking up from sleep with an unexpected crash message. Any and...
BSOD Help and Support
Lost internet when awaking from hibernation
When awaiking from hibernation win7 looses internet connection and I have to restart the computer to reconnect, Is there any other way around to resolve the problem? Do I have any bad configuration on my win7 for this to happen, I never have this sort of problem on win xp.
Network & Sharing
OS keep randomly awaking from hibernate
running windows 7 professional on a tower PC and when i put it into hibernate, a few hours later it will turn its self back all by its self in the BIOS i have disabled allow resume by USB devices and its still doing it in the event viewer under windows logs -> system it theres a entry called...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 21:39.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App