Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Help with BSOD

25 Mar 2010   #11
ldsdbomber

Microsoft Windows 7 Home Premium, 64-bit
 
 

Well another crash. Blimey, I had Vista for almost 3 years and never had a single BSOD. What the flip...

this one happened as I closed IEx64 with about 6 tabs opened, straight to BSOD

The memtest I ran following previous advice was all clear.

Please help!


My System SpecsSystem Spec
.
29 Mar 2010   #12
ldsdbomber

Microsoft Windows 7 Home Premium, 64-bit
 
 

Help! This is affecting me daily
On Mon 2010-03-29 17:32:48 your computer crashed
This was likely caused by the following module: netio.sys

Bugcheck code: 0xA (0xFFFFFA7FFFFFFFE0, 0x2, 0x1, 0xFFFFF80002CFE35F)
Error: IRQL_NOT_LESS_OR_EQUAL

Dump file: C:\Windows\Minidump\032910-14383-01.dmp
file path: C:\Windows\system32\drivers\netio.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Network I/O Subsystem
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit is in another driver on your system which cannot be identified at this time.



On Sat 2010-03-27 13:14:52 your computer crashed
This was likely caused by the following module: ntoskrnl.exe
Bugcheck code: 0xA (0xFFFFFAD505CF1F90, 0x2, 0x0, 0xFFFFF80002D2CA8F)
Error: IRQL_NOT_LESS_OR_EQUAL
Dump file: C:\Windows\Minidump\032710-14913-01.dmp
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit is in another driver on your system which cannot be identified at this time.


I have installed the latest drivers, at least I thought so (for my broadcom card) but wonder if I should uninstall the entire network device and reinstall. But am a bit worried about potentially losing all network functionality

please can someone help,this is driving me bonkers. The only causes I have seen (maybe) are related to unplugging the network plug out of my router box in the wall (its Telia), Internet Explorer 64 bit and/or Vuze are the apps running, along with TrueCrypt.
My System SpecsSystem Spec
29 Mar 2010   #13
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by ldsdbomber View Post
Help! This is affecting me daily
On Mon 2010-03-29 17:32:48 your computer crashed
This was likely caused by the following module: netio.sys

Bugcheck code: 0xA (0xFFFFFA7FFFFFFFE0, 0x2, 0x1, 0xFFFFF80002CFE35F)
Error: IRQL_NOT_LESS_OR_EQUAL

Dump file: C:\Windows\Minidump\032910-14383-01.dmp
file path: C:\Windows\system32\drivers\netio.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Network I/O Subsystem
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit is in another driver on your system which cannot be identified at this time.



On Sat 2010-03-27 13:14:52 your computer crashed
This was likely caused by the following module: ntoskrnl.exe
Bugcheck code: 0xA (0xFFFFFAD505CF1F90, 0x2, 0x0, 0xFFFFF80002D2CA8F)
Error: IRQL_NOT_LESS_OR_EQUAL
Dump file: C:\Windows\Minidump\032710-14913-01.dmp
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit is in another driver on your system which cannot be identified at this time.


I have installed the latest drivers, at least I thought so (for my broadcom card) but wonder if I should uninstall the entire network device and reinstall. But am a bit worried about potentially losing all network functionality

please can someone help,this is driving me bonkers. The only causes I have seen (maybe) are related to unplugging the network plug out of my router box in the wall (its Telia), Internet Explorer 64 bit and/or Vuze are the apps running, along with TrueCrypt.
Both of these were caused by memory corruption.

Download memtestx86 and run for at least 5 passes.

also if you are overclocking stop
If you have a raid update its driver

Let us know if you need help

Ken


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\K\Desktop\New folder (3)\032910-14383-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02c67000 PsLoadedModuleList = 0xfffff800`02ea4e50
Debug session time: Mon Mar 29 13:31:18.684 2010 (GMT-4)
System Uptime: 0 days 0:40:15.808
Loading Kernel Symbols
...............................................................
................................................................
...............
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa7fffffffe0, 2, 1, fffff80002cfe35f}

Probably caused by : memory_corruption ( nt!MiReplenishPageSlist+100 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffffa7fffffffe0, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002cfe35f, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002f0f0e0
 fffffa7fffffffe0 

CURRENT_IRQL:  2

FAULTING_IP: 
nt!MiReplenishPageSlist+100
fffff800`02cfe35f f00fba6b1000    lock bts dword ptr [rbx+10h],0

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xA

PROCESS_NAME:  svchost.exe

TRAP_FRAME:  fffff8800aa8b6c0 -- (.trap 0xfffff8800aa8b6c0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffffffffffffff rbx=0000000000000000 rcx=fdffffffffffffff
rdx=0000000000000041 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002cfe35f rsp=fffff8800aa8b850 rbp=fffffa8005400cf8
 r8=fffff80002f11400  r9=fffffa8005400000 r10=fffffa8005400d18
r11=fffff8800aa8b8a8 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
nt!MiReplenishPageSlist+0x100:
fffff800`02cfe35f f00fba6b1000    lock bts dword ptr [rbx+10h],0 ds:9b01:00000000`00000010=????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002cd8469 to fffff80002cd8f00

STACK_TEXT:  
fffff880`0aa8b578 fffff800`02cd8469 : 00000000`0000000a fffffa7f`ffffffe0 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`0aa8b580 fffff800`02cd70e0 : fffffa80`08bee468 fffffa7f`ffffffd0 fffff800`02e66880 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`0aa8b6c0 fffff800`02cfe35f : 00000000`00000000 fffff880`0aa8b890 fffff880`0aa8b898 fffff880`0aa8b8a8 : nt!KiPageFault+0x260
fffff880`0aa8b850 fffff800`02cfe88f : fffff800`02f11400 00000000`00000053 fffffa80`03b06790 fffffa7f`ffffffd0 : nt!MiReplenishPageSlist+0x100
fffff880`0aa8b8b0 fffff800`02cf6a97 : 00000000`00000002 fffff880`00000002 fffffa80`08e49ec8 00000000`00000002 : nt!MiRemoveAnyPage+0x24f
fffff880`0aa8b9d0 fffff800`02cf31a6 : 00000000`00000001 00000000`086d9000 fffff880`0aa8bc20 fffff680`000436c8 : nt!MiResolveDemandZeroFault+0x577
fffff880`0aa8bac0 fffff800`02cd6fee : 00000000`00000001 00000000`00000000 00000000`033ef701 fffffa80`09bec120 : nt!MmAccessFault+0x5c6
fffff880`0aa8bc20 000007fe`fece1060 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x16e
00000000`033ef888 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7fe`fece1060


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!MiReplenishPageSlist+100
fffff800`02cfe35f f00fba6b1000    lock bts dword ptr [rbx+10h],0

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  nt!MiReplenishPageSlist+100

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP:  4a5bc600

IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0xA_nt!MiReplenishPageSlist+100

BUCKET_ID:  X64_0xA_nt!MiReplenishPageSlist+100

Followup: MachineOwner
---------
My System SpecsSystem Spec
.

29 Mar 2010   #14
ldsdbomber

Microsoft Windows 7 Home Premium, 64-bit
 
 

Hi
Yes, I need help! I ran memtest the first time i posted here, and it ran 6 successful passes in about 6 hours.
This is a brand new system bought online via dustinhome.se, I am not overclocking or anything like that, but I do use some external hard drives, usually only one is powered up though.
thx
Lee
My System SpecsSystem Spec
29 Mar 2010   #15
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by ldsdbomber View Post
Hi
Yes, I need help! I ran memtest the first time i posted here, and it ran 6 successful passes in about 6 hours.
This is a brand new system bought online via dustinhome.se, I am not overclocking or anything like that, but I do use some external hard drives, usually only one is powered up though.
thx
Lee
Have you run a system file check?

type cmd in search>right click and run as admin>sfc /scannow (note the space between sfc and "/")

Let us know if you need help

Ken
My System SpecsSystem Spec
29 Mar 2010   #16
ldsdbomber

Microsoft Windows 7 Home Premium, 64-bit
 
 

Thanks Ken, I will run that right away.
Ah yes, it found something

Windows Resource Protection found corrupt files but was unable to fix some of them. Here is the CBS log.
FYI when I saw "resource" I cringed. I did apply some kind of LIP file to get English windows, since it was Swedish and my swedish is not yet good enough to learn a new OS!!!! I used a program called Vistalisator I think, and a LIP downloaded from a reputable sounding page from a link here on these forums I believe,.

I also found this weblink
Cannot repair tcpmon.ini - DELL COMMUNITY

here is the cbs log file
My System SpecsSystem Spec
29 Mar 2010   #17
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by ldsdbomber View Post
Thanks Ken, I will run that right away.
Ah yes, it found something

Windows Resource Protection found corrupt files but was unable to fix some of them. Here is the CBS log.
FYI when I saw "resource" I cringed. I did apply some kind of LIP file to get English windows, since it was Swedish and my swedish is not yet good enough to learn a new OS!!!! I used a program called Vistalisator I think, and a LIP downloaded from a reputable sounding page from a link here on these forums I believe,.

I also found this weblink
Cannot repair tcpmon.ini - DELL COMMUNITY

here is the cbs log file
Nice link

Ken
My System SpecsSystem Spec
13 Apr 2010   #18
ldsdbomber

Microsoft Windows 7 Home Premium, 64-bit
 
 

I did the scannow, it found some of those tcpmon.ini errors it could not fix, but doing it with the install disk in the drive, and using those flags with scannow to tell it where the winbootdir etc were, it did not seem to access or fix the files from the disk. Anyway, I did the reset of the tcp stack and thought I had cracked it, no crashes for about 2 days but then it came back one day browsing and its still happening.

I am thinking about trying to reseat or move the memory, I think I have 4 GB in 2 x 2GB I hope, but do they have to be in specific slots, think my motherboard has 4, but they are alternately coloured black and blue.
My System SpecsSystem Spec
17 Apr 2010   #19
ldsdbomber

Microsoft Windows 7 Home Premium, 64-bit
 
 

hello?
My System SpecsSystem Spec
17 Apr 2010   #20
Jonathan_King

Windows 7 Professional x64
 
 

Put the RAM in the same colored slots. I suspect that's the cause of your errors.
My System SpecsSystem Spec
Reply

 Help with BSOD




Thread Tools



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 06:10.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App