Several BSOD


  1. Posts : 2
    Windows 7 32 bits
       #1

    Several BSOD


    Hi,

    my problem is quite simple. I often get BSOD and I can't find where it can come from. BSOD occur sometimes after short period of utilisation (few hours) and sometimes I don't get anything during few weeks. I joined the dumps which result from the BSODs of today. (my apologies, I don't speak english very well). Thank you very much for helping me in advance.

    A lost french guy
      My Computer


  2. Posts : 28,845
    Win 8 Release candidate 8400
       #2

    Atari said:
    Hi,

    my problem is quite simple. I often get BSOD and I can't find where it can come from. BSOD occur sometimes after short period of utilisation (few hours) and sometimes I don't get anything during few weeks. I joined the dumps which result from the BSODs of today. (my apologies, I don't speak english very well). Thank you very much for helping me in advance.

    A lost french guy

    The Windows Debugging Tools aren't able to access symbols for your operating system files (in particular NTOSKRNL.EXE / NTKRNLMP.EXE / NTKRNLPA.EXE / NTKRPAMP.EXE) from the Microsoft Symbol Server - so that makes debugging them difficult if not impossible.

    Please do the following:
    - activate/validate the Windows installation at Genuine Microsoft Software
    - run sfc.exe /scannow to replace any problem files
    - open a support incident with Microsoft to see if they can fix the missing symbols issue ( Windows 7 Solution Center )
    - If that doesn't fix it, then wipe the hard drive and reinstall Windows
    - don't use "leaked"/torrent builds

    Code:
    Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
    Copyright (c) Microsoft Corporation. All rights reserved.
    
    
    Loading Dump File [C:\Users\K\Desktop\New folder (3)\032410-17955-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    
    Symbol search path is: SRV*F:\symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is: 
    Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntkrnlpa.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
    Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS Personal
    Built by: 7600.16481.x86fre.win7_gdr.091207-1941
    Machine Name:
    Kernel base = 0x82a3d000 PsLoadedModuleList = 0x82b85810
    Debug session time: Wed Mar 24 18:15:01.608 2010 (GMT-4)
    System Uptime: 0 days 4:06:35.075
    Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntkrnlpa.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
    Loading Kernel Symbols
    ...............................................................
    ................................................................
    ......................
    Loading User Symbols
    Loading unloaded module list
    ..........
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    
    BugCheck 1000008E, {c0000005, 955b0cf5, 8cbad690, 0}
    
    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.
    
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    Probably caused by : win32k.sys ( win32k!RFONTOBJ::bMakeInactiveHelper+231 )
    
    Followup: MachineOwner
    ---------
      My Computer


  3. Posts : 2
    Windows 7 32 bits
    Thread Starter
       #3

    Thank you very much for your answer.
    I will try what you indicate. Hoping it will fix anything.
      My Computer


 

Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 20:46.
Find Us