Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Insufficient System Resources Error Message

12 Apr 2010   #11

Windows 7 Home Premium 64-bit

One more time. I found a neat little BAT file that does exactly what I said I needed - it clears all events in a matter of seconds.

I restore my system disk so that it was back in the state where it would not do the copy/move of the 20 GB file and ran the BAT to clear all events. It seemed to work and as expected. After it completed I could copy/move the 20 GB file. So I am pretty sure it has something to do with how much stuff Windows has accumulated in the event logs. I included a "revised" MSInfo32 file since I'm not sure if the last one was correct after what Cleanmgr with everything selected for deletion did to my system!

My System SpecsSystem Spec
13 Apr 2010   #12

Windows 7 - Vista

Hi -

There was NO Error reporting information in either msinfo32 file (WERCON), probably because of the batch script that you ran!

If there are events (errors..?) being recoded by the Event Viewer at some horrific rate during a file transfer that requires the removal of such events before each large file transfer, that in itself is a problem.

These items are found in "bad guy" that are not found in "good guy" - loaded module listing -
CLDTVHNService 73.29 KB (75,048 bytes) 9/17/2009 7:40 PM  
c:\program files (x86)\directv\directv\kernel\dmp\cldtvhnservice.exe
iaantmon 346.52 KB (354,840 bytes) 
10/12/2008 7:21 AM Intel Corporation 
c:\program files (x86)\intel\intel matrix storage manager\iaantmon.exe
iaanotif 178.52 KB (182,808 bytes) 
10/12/2008 7:21 AM Intel Corporation 
c:\program files (x86)\intel\intel matrix storage manager\iaanotif.exe
You do have Norton Internet Security on both systems. Knowing that NIS phones-home every 15 minutes or less + the other event log entries it generates, it may be an issue on the one system. You may just be lucky on the 2nd system w/ NIS.

The Event Viewer does record events in SAFEMODE just as it does in normal Windows.

Regards. . .


My System SpecsSystem Spec
14 Apr 2010   #13

Windows 7 Home Premium 64-bit

You are correct. The "bad guy" system had several pages of W7 crashes that I had caused when I was in the process of overclocking the system. Apparently clearing them out (I did it maually before discovering the script!) makes the problem go away. I will let the event logs alone for a few weeks and then try the huge file copy again to make sure it is still working - if not I'll supply you with a "good" MSInfo32 file and maybe get to the root cause.
My System SpecsSystem Spec


 Insufficient System Resources Error Message

Thread Tools

Similar help and support threads
Thread Forum
Memory Leak: Insufficient System Resources
My practice is to turn off the machine at bedtime and reboot it every morning, so that it gets a fresh start every day. I upgraded to Windows-7 from -XP about a month ago, applied all available updates and thought it the right move until recently. Now after the machine runs several hours, when I...
Performance & Maintenance
keep failing to solve 'insufficient resources' problem in windows 7
This problem is getting pretty old, and I've gone through a lot of searches and potential solutions already. Please read 'solutions tried' before answering... Details about my systems. 1) The older computer: Samsung HDD, 6GB RAM, Core 2 Duo, running on Asus P5K mainboard. Four times as much...
Performance & Maintenance
0x800705AA Insufficient System Resources
Need a little help. I have three W7 Home Premium Systems running on a gigabit network. When I copy a huge Acronis backup files (20+GB) from system B (using Windows Explorer on System B) to system A it runs at 40+ MB/Sec and quickly fails with the 0x800705AA error code. When I copy the same file...
Network & Sharing
Halo 2 Insufficient Resources
I FINALLY got Halo 2 to do something by running it in compatibility mode for Windows XP. But now it says I have insufficient resources. Now I know I have sufficient resources because I can run Metro 2033 with DX10 on high. The problem is that my switchable graphics don't actually switch to the...
XP Mode insufficient resources
HP ProBook 4510s Windows 7 Pro 32 Intel Core Duo T6570 2.1GHz 4G RAM Memory allocated to XP Mode is 2048M I followed the instructions on this site to install and set-up XP Mode. The first time I launch the XP mode after a reboot, it will work correctly. From that point forward, the...

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:34.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App