Windows 7 64 bit ultimate crashes regularly


  1. KBB
    Posts : 6
    Windows 7 ultimate 64bit build 7600
       #1

    Windows 7 64 bit ultimate crashes regularly


    I've recently installed windows 7 64 bit ultimate on my pc. I get regular crashes. Sometimes my pc just restarts, other times it freezes and I have to manually reset. Sometimes I get a BSOD message and at other times not. I have installed all the latest drivers for my hardware.

    Specs.

    Intel Core 2 Quad Q9400
    Foxconn P43aL M/B
    2x 1GB Kingston RAM
    500GB Seagate HD
    ATI Radeon HD5750 1GB


    Attached is my latest minidump.


    Any comments or suggestions would be appreciated.
      My Computer


  2. Posts : 5,705
    Win7 x64 + x86
       #2

    Please provide the information in this post: SF Diagnostic Tool

    The single memory dump file is a STOP 0x3B (more info here: BSOD Index ) As it's a System Service error - I suspect that win32k.sys is not to blame (despite the debugger's claims to the contrary).

    Please remove or update these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager.
    Please use the following instructions to locate the most currently available drivers to replace the one's that you uninstall OR remove:
    How To Find Drivers:
    - search Google for the name of the driver
    - compare the Google results with what's installed on your system to figure out which device/program it belongs to
    - visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
    - if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.
    - - The most common drivers are listed on this page: Driver Reference
    - - Driver manufacturer links are on this page: http://www.carrona.org/drvrdown.html

    Here's the older drivers. Please pay particular attention to any dated 2007 or earlier:
    Code:
    asusgsb.sys  Thu Sep 27 09:14:50 2007 - ASUS Virtual Video Capture Device Driver - http://www.carrona.org/dvrref.html#asusgsb.sys
    ATKDispLowFilter.sys Tue May 13 23:03:13 2008 -                               ASUSTeK Display Lower Filter - http://www.carrona.org/dvrref.html#ATKDispLowFilter.sys
    seehcri.sys  Wed Jan 09 03:41:35 2008 -    Sony  Ericsson Device 0016 (likely   to be a phone) - http://www.carrona.org/dvrref.html#seehcri.sys
    After the drivers are updated, please run Driver Verifier according to these instructions:
    Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

    So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

    Then, here's the procedure:
    - Go to Start and type in "verifier" (without the quotes) and press Enter
    - Select "Create custom settings (for code developers)" and click "Next"
    - Select "Select individual settings from a full list" and click "Next"
    - Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
    - Select "Select driver names from a list" and click "Next"
    Then select all drivers NOT provided by Microsoft and click "Next"
    - Select "Finish" on the next page.

    Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

    Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

    If you can't get into Windows because it crashes too soon, try it in Safe Mode.
    If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
    If that doesn't work, post back and we'll have to see about fixing the registry entry off-line.

    More info on this at this link: Using Driver Verifier to identify issues with Windows drivers for advanced users
    Summary of the BSOD:
    Code:
    Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
    Debug session time: Thu Apr  8 06:44:39.571 2010 (GMT-4)
    System Uptime: 0 days 0:00:15.976
    BugCheck 3B, {c0000005, fffff960000e1337, fffff880021adfa0, 0}
    Probably caused by : win32k.sys ( win32k!HMAllocObject+43 )
    BUGCHECK_STR:  0x3B
    PROCESS_NAME:  avgchsva.exe
      My Computer


  3. KBB
    Posts : 6
    Windows 7 ultimate 64bit build 7600
    Thread Starter
       #3

    Thanks for the post. I will do as you have suggested and will post back.
      My Computer


  4. KBB
    Posts : 6
    Windows 7 ultimate 64bit build 7600
    Thread Starter
       #4

    Hi

    I've done a new install and there doesn't seem to be any problems yet.

    Thanks for you help.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 15:22.
Find Us