Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: NEW PC HARDWARE BSODS - minidumps in

28 Apr 2010   #31
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Wallonn7 View Post
Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by Wallonn7 View Post
All ATI components were removed. Driver Sweeper under Safe Mode. Reinstall JUST video driver. Three boot ups towards this process, as required. Turn pc off. Turn it on one hour later... what happened?!...


Nothing has changed. there is almost nothing in this dmp to help you. This particular bug check is Usual causes: System service, Device driver, graphics driver, ?memory.

We have asked you to test the memory, to run a system file check.

If you are overclocking stop

then if you still have them you are going to need to run driver verifier. before you do you will need to have a restore point and a backup, plus a win 7 dvd.

Let us know when you have them.

Ken
I'll test memory tomorrow.

Sfc /scannow begins and suddenly goes to 78% ( ?! )... and found no problem - as you may see at attachment.

No O.C.. I've just rise ram voltage to 1.515v, 'cause at defaults 1.500v, BIOS shows 1.488v. After rise to 1.515v, BIOS shows 1.505v now.

Driver Verifier is running since post #13, or yesterday tonight. All latest BSODs came under Driver Verifier running.

Thanks a lot for helping!


Yoou should give us the CBS.log file created from sfc /scannow


My System SpecsSystem Spec
.
28 Apr 2010   #32
Wallonn7

Windows 7 Ultimate x64 SP1
 
 

Here is CBS:


My System SpecsSystem Spec
28 Apr 2010   #33
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Wallonn7 View Post
Here is CBS:


When it finished did it say it found errors and fixed them, found errors and couldnt fix them, or didnt find any errors?
My System SpecsSystem Spec
.

28 Apr 2010   #34
Wallonn7

Windows 7 Ultimate x64 SP1
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by Wallonn7 View Post
Here is CBS:


When it finished did it say it found errors and fixed them, found errors and couldnt fix them, or didnt find any errors?
Found no errors - this under CMD.
My System SpecsSystem Spec
28 Apr 2010   #35
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Wallonn7 View Post
Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by Wallonn7 View Post
Here is CBS:


When it finished did it say it found errors and fixed them, found errors and couldnt fix them, or didnt find any errors?
Found no errors - this under CMD.
For what ever reason something is causing these. We have thrown the entire book at you and yet they still happen. Something must be amiss. You must be at default, nothing overclocked, under volted, etc. Start pulling off pieces of hardware till just the key boear, mouse, monitor, and mobo, are connected.

Also do me a favor and post the answers so if someone else comes along they will know what is going on.

Ken
My System SpecsSystem Spec
28 Apr 2010   #36
Wallonn7

Windows 7 Ultimate x64 SP1
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by Wallonn7 View Post
Quote   Quote: Originally Posted by zigzag3143 View Post

When it finished did it say it found errors and fixed them, found errors and couldnt fix them, or didnt find any errors?
Found no errors - this under CMD.
For what ever reason something is causing these. We have thrown the entire book at you and yet they still happen. Something must be amiss. You must be at default, nothing overclocked, under volted, etc. Start pulling off pieces of hardware till just the key boear, mouse, monitor, and mobo, are connected.

Also do me a favor and post the answers so if someone else comes along they will know what is going on.

Ken
Sorry about didn't post the answers...
I'll do everything you saying and let you know the results... but just tomorrow 'cause I'm going to sleep right know...

Thanks for dedication and patience!!
My System SpecsSystem Spec
29 Apr 2010   #37
Wallonn7

Windows 7 Ultimate x64 SP1
 
 

Ok. Last tonight before sleep:
BIOS was set to defaults. RAM Timings are 9-9-9-24 now. By G.Skill spec they should be: 7-7-7-21.
CPU-Z and Everest shows DRAM frequency "671.3MHz"?! Is that normal?!
I pulled one from two ram modules off.
In this morning I turn pc on. everything runs fine. Turn it off. After I came back from job, I turn it on and at the desktop, "explorer.exe" stop working and it closes. At Task Manager, I tried to restart it... Task Manager freezes and BSOD - CACHE_MANAGER. Restart Windows wihout problems, what's normal at "my" BSODs context. Now I'll try another RAM module.
Is normal "sfc /scanow" shows 78% and report it ends and found no errors?! And why "sfc /verifyonly" says it "cannot execute solicited operation"?!
Until next report!


My System SpecsSystem Spec
29 Apr 2010   #38
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Wallonn7 View Post
Ok. Last tonight before sleep:
BIOS was set to defaults. RAM Timings are 9-9-9-24 now. By G.Skill spec they should be: 7-7-7-21.
CPU-Z and Everest shows DRAM frequency "671.3MHz"?! Is that normal?!
I pulled one from two ram modules off.
In this morning I turn pc on. everything runs fine. Turn it off. After I came back from job, I turn it on and at the desktop, "explorer.exe" stop working and it closes. At Task Manager, I tried to restart it... Task Manager freezes and BSOD - CACHE_MANAGER. Restart Windows wihout problems, what's normal at "my" BSODs context. Now I'll try another RAM module.
Is normal "sfc /scanow" shows 78% and report it ends and found no errors?! And why "sfc /verifyonly" says it "cannot execute solicited operation"?!
Until next report!


No it is not normal. At some point you need to start thinking about a clean re-install. There is obviously something wrong with either your hardware, or software.


This last one was definative. Memory Corruption


see below
Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\K\Desktop\042910-20202-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02c5d000 PsLoadedModuleList = 0xfffff800`02e9ae50
Debug session time: Thu Apr 29 09:16:46.731 2010 (GMT-4)
System Uptime: 0 days 0:04:38.011
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

..............................................................
................................................................
..........................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 34, {50830, fffff880031564f8, fffff88003155d60, fffff80002cf763a}

Probably caused by : memory_corruption ( nt!MmUnmapViewInSystemCache+ca )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

CACHE_MANAGER (34)
    See the comment for FAT_FILE_SYSTEM (0x23)
Arguments:
Arg1: 0000000000050830
Arg2: fffff880031564f8
Arg3: fffff88003155d60
Arg4: fffff80002cf763a

Debugging Details:
------------------


EXCEPTION_RECORD:  fffff880031564f8 -- (.exr 0xfffff880031564f8)
ExceptionAddress: fffff80002cf763a (nt!MmUnmapViewInSystemCache+0x00000000000000ca)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT:  fffff88003155d60 -- (.cxr 0xfffff88003155d60)
rax=fffbf8a0029dc370 rbx=fffffa80018e9680 rcx=0000000000000000
rdx=0000000fffffffff rsi=fffff8a0029e08b0 rdi=fffff6fcc0063600
rip=fffff80002cf763a rsp=fffff88003156730 rbp=0000000000000000
 r8=0000000000000000  r9=fffff9800c6c0000 r10=fffffa800504e098
r11=fffff88003156ad8 r12=0000000000000000 r13=0000000000000000
r14=fffffa8000325350 r15=0000000000000000
iopl=0         nv up ei ng nz na po cy
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010287
nt!MmUnmapViewInSystemCache+0xca:
fffff800`02cf763a 4c8b18          mov     r11,qword ptr [rax] ds:002b:fffbf8a0`029dc370=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  0

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  ffffffffffffffff

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002f050e0
 ffffffffffffffff 

FOLLOWUP_IP: 
nt!MmUnmapViewInSystemCache+ca
fffff800`02cf763a 4c8b18          mov     r11,qword ptr [rax]

FAULTING_IP: 
nt!MmUnmapViewInSystemCache+ca
fffff800`02cf763a 4c8b18          mov     r11,qword ptr [rax]

BUGCHECK_STR:  0x34

LAST_CONTROL_TRANSFER:  from fffff80002fe5155 to fffff80002cf763a

STACK_TEXT:  
fffff880`03156730 fffff800`02fe5155 : fffff980`0c6c0000 fffff8a0`029e08b0 00000000`00000000 00000000`00000000 : nt!MmUnmapViewInSystemCache+0xca
fffff880`03156a10 fffff800`02ce6447 : 00000000`00000000 fffffa80`018b1300 00000000`00000000 00000000`00100000 : nt!CcUnmapVacb+0x5d
fffff880`03156a50 fffff800`02cbd174 : 00000000`00000001 fffffa80`055f7640 fffffa80`0541d300 00000000`00000000 : nt!CcUnmapVacbArray+0x1b7
fffff880`03156ae0 fffff800`02cc0c1c : fffffa80`0541d340 fffff880`041946ff fffffa80`0541d340 fffffa80`018e9600 : nt!CcDeleteSharedCacheMap+0x140
fffff880`03156b50 fffff800`02cc141c : fffff880`041abd00 fffff880`03156c58 00000000`00000000 fffff880`00000000 : nt!CcWriteBehind+0x5bc
fffff880`03156c00 fffff800`02cda861 : fffffa80`018ec4f0 fffff800`02cc1254 fffff800`02ed4140 fffffa80`00000003 : nt!CcWorkerThread+0x1c8
fffff880`03156cb0 fffff800`02f72a86 : 00000000`00000000 fffffa80`018e9680 00000000`00000080 fffffa80`018ca040 : nt!ExpWorkerThread+0x111
fffff880`03156d40 fffff800`02cabb06 : fffff880`02f64180 fffffa80`018e9680 fffff880`02f6efc0 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`03156d80 00000000`00000000 : fffff880`03157000 fffff880`03151000 fffff880`03155c60 00000000`00000000 : nt!KxStartSystemThread+0x16


SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  nt!MmUnmapViewInSystemCache+ca

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP:  4b88cfeb

STACK_COMMAND:  .cxr 0xfffff88003155d60 ; kb

IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0x34_nt!MmUnmapViewInSystemCache+ca

BUCKET_ID:  X64_0x34_nt!MmUnmapViewInSystemCache+ca

Followup: MachineOwner
---------
My System SpecsSystem Spec
29 Apr 2010   #39
Wallonn7

Windows 7 Ultimate x64 SP1
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by Wallonn7 View Post
Ok. Last tonight before sleep:
BIOS was set to defaults. RAM Timings are 9-9-9-24 now. By G.Skill spec they should be: 7-7-7-21.
CPU-Z and Everest shows DRAM frequency "671.3MHz"?! Is that normal?!
I pulled one from two ram modules off.
In this morning I turn pc on. everything runs fine. Turn it off. After I came back from job, I turn it on and at the desktop, "explorer.exe" stop working and it closes. At Task Manager, I tried to restart it... Task Manager freezes and BSOD - CACHE_MANAGER. Restart Windows wihout problems, what's normal at "my" BSODs context. Now I'll try another RAM module.
Is normal "sfc /scanow" shows 78% and report it ends and found no errors?! And why "sfc /verifyonly" says it "cannot execute solicited operation"?!
Until next report!


No it is not normal. At some point you need to start thinking about a clean re-install. There is obviously something wrong with either your hardware, or software.


This last one was definative. Memory Corruption


see below
Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\K\Desktop\042910-20202-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02c5d000 PsLoadedModuleList = 0xfffff800`02e9ae50
Debug session time: Thu Apr 29 09:16:46.731 2010 (GMT-4)
System Uptime: 0 days 0:04:38.011
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

..............................................................
................................................................
..........................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 34, {50830, fffff880031564f8, fffff88003155d60, fffff80002cf763a}

Probably caused by : memory_corruption ( nt!MmUnmapViewInSystemCache+ca )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

CACHE_MANAGER (34)
    See the comment for FAT_FILE_SYSTEM (0x23)
Arguments:
Arg1: 0000000000050830
Arg2: fffff880031564f8
Arg3: fffff88003155d60
Arg4: fffff80002cf763a

Debugging Details:
------------------


EXCEPTION_RECORD:  fffff880031564f8 -- (.exr 0xfffff880031564f8)
ExceptionAddress: fffff80002cf763a (nt!MmUnmapViewInSystemCache+0x00000000000000ca)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT:  fffff88003155d60 -- (.cxr 0xfffff88003155d60)
rax=fffbf8a0029dc370 rbx=fffffa80018e9680 rcx=0000000000000000
rdx=0000000fffffffff rsi=fffff8a0029e08b0 rdi=fffff6fcc0063600
rip=fffff80002cf763a rsp=fffff88003156730 rbp=0000000000000000
 r8=0000000000000000  r9=fffff9800c6c0000 r10=fffffa800504e098
r11=fffff88003156ad8 r12=0000000000000000 r13=0000000000000000
r14=fffffa8000325350 r15=0000000000000000
iopl=0         nv up ei ng nz na po cy
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010287
nt!MmUnmapViewInSystemCache+0xca:
fffff800`02cf763a 4c8b18          mov     r11,qword ptr [rax] ds:002b:fffbf8a0`029dc370=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  0

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  ffffffffffffffff

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002f050e0
 ffffffffffffffff 

FOLLOWUP_IP: 
nt!MmUnmapViewInSystemCache+ca
fffff800`02cf763a 4c8b18          mov     r11,qword ptr [rax]

FAULTING_IP: 
nt!MmUnmapViewInSystemCache+ca
fffff800`02cf763a 4c8b18          mov     r11,qword ptr [rax]

BUGCHECK_STR:  0x34

LAST_CONTROL_TRANSFER:  from fffff80002fe5155 to fffff80002cf763a

STACK_TEXT:  
fffff880`03156730 fffff800`02fe5155 : fffff980`0c6c0000 fffff8a0`029e08b0 00000000`00000000 00000000`00000000 : nt!MmUnmapViewInSystemCache+0xca
fffff880`03156a10 fffff800`02ce6447 : 00000000`00000000 fffffa80`018b1300 00000000`00000000 00000000`00100000 : nt!CcUnmapVacb+0x5d
fffff880`03156a50 fffff800`02cbd174 : 00000000`00000001 fffffa80`055f7640 fffffa80`0541d300 00000000`00000000 : nt!CcUnmapVacbArray+0x1b7
fffff880`03156ae0 fffff800`02cc0c1c : fffffa80`0541d340 fffff880`041946ff fffffa80`0541d340 fffffa80`018e9600 : nt!CcDeleteSharedCacheMap+0x140
fffff880`03156b50 fffff800`02cc141c : fffff880`041abd00 fffff880`03156c58 00000000`00000000 fffff880`00000000 : nt!CcWriteBehind+0x5bc
fffff880`03156c00 fffff800`02cda861 : fffffa80`018ec4f0 fffff800`02cc1254 fffff800`02ed4140 fffffa80`00000003 : nt!CcWorkerThread+0x1c8
fffff880`03156cb0 fffff800`02f72a86 : 00000000`00000000 fffffa80`018e9680 00000000`00000080 fffffa80`018ca040 : nt!ExpWorkerThread+0x111
fffff880`03156d40 fffff800`02cabb06 : fffff880`02f64180 fffffa80`018e9680 fffff880`02f6efc0 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`03156d80 00000000`00000000 : fffff880`03157000 fffff880`03151000 fffff880`03155c60 00000000`00000000 : nt!KxStartSystemThread+0x16


SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  nt!MmUnmapViewInSystemCache+ca

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP:  4b88cfeb

STACK_COMMAND:  .cxr 0xfffff88003155d60 ; kb

IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0x34_nt!MmUnmapViewInSystemCache+ca

BUCKET_ID:  X64_0x34_nt!MmUnmapViewInSystemCache+ca

Followup: MachineOwner
---------
I'll try the other ram memory... report it later!!!

Thanks one more time for the support!!!
My System SpecsSystem Spec
29 Apr 2010   #40
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Wallonn7 View Post
Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by Wallonn7 View Post
Ok. Last tonight before sleep:
BIOS was set to defaults. RAM Timings are 9-9-9-24 now. By G.Skill spec they should be: 7-7-7-21.
CPU-Z and Everest shows DRAM frequency "671.3MHz"?! Is that normal?!
I pulled one from two ram modules off.
In this morning I turn pc on. everything runs fine. Turn it off. After I came back from job, I turn it on and at the desktop, "explorer.exe" stop working and it closes. At Task Manager, I tried to restart it... Task Manager freezes and BSOD - CACHE_MANAGER. Restart Windows wihout problems, what's normal at "my" BSODs context. Now I'll try another RAM module.
Is normal "sfc /scanow" shows 78% and report it ends and found no errors?! And why "sfc /verifyonly" says it "cannot execute solicited operation"?!
Until next report!


No it is not normal. At some point you need to start thinking about a clean re-install. There is obviously something wrong with either your hardware, or software.


This last one was definative. Memory Corruption


see below
Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\K\Desktop\042910-20202-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02c5d000 PsLoadedModuleList = 0xfffff800`02e9ae50
Debug session time: Thu Apr 29 09:16:46.731 2010 (GMT-4)
System Uptime: 0 days 0:04:38.011
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

..............................................................
................................................................
..........................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 34, {50830, fffff880031564f8, fffff88003155d60, fffff80002cf763a}

Probably caused by : memory_corruption ( nt!MmUnmapViewInSystemCache+ca )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

CACHE_MANAGER (34)
    See the comment for FAT_FILE_SYSTEM (0x23)
Arguments:
Arg1: 0000000000050830
Arg2: fffff880031564f8
Arg3: fffff88003155d60
Arg4: fffff80002cf763a

Debugging Details:
------------------


EXCEPTION_RECORD:  fffff880031564f8 -- (.exr 0xfffff880031564f8)
ExceptionAddress: fffff80002cf763a (nt!MmUnmapViewInSystemCache+0x00000000000000ca)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT:  fffff88003155d60 -- (.cxr 0xfffff88003155d60)
rax=fffbf8a0029dc370 rbx=fffffa80018e9680 rcx=0000000000000000
rdx=0000000fffffffff rsi=fffff8a0029e08b0 rdi=fffff6fcc0063600
rip=fffff80002cf763a rsp=fffff88003156730 rbp=0000000000000000
 r8=0000000000000000  r9=fffff9800c6c0000 r10=fffffa800504e098
r11=fffff88003156ad8 r12=0000000000000000 r13=0000000000000000
r14=fffffa8000325350 r15=0000000000000000
iopl=0         nv up ei ng nz na po cy
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010287
nt!MmUnmapViewInSystemCache+0xca:
fffff800`02cf763a 4c8b18          mov     r11,qword ptr [rax] ds:002b:fffbf8a0`029dc370=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  0

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  ffffffffffffffff

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002f050e0
 ffffffffffffffff 

FOLLOWUP_IP: 
nt!MmUnmapViewInSystemCache+ca
fffff800`02cf763a 4c8b18          mov     r11,qword ptr [rax]

FAULTING_IP: 
nt!MmUnmapViewInSystemCache+ca
fffff800`02cf763a 4c8b18          mov     r11,qword ptr [rax]

BUGCHECK_STR:  0x34

LAST_CONTROL_TRANSFER:  from fffff80002fe5155 to fffff80002cf763a

STACK_TEXT:  
fffff880`03156730 fffff800`02fe5155 : fffff980`0c6c0000 fffff8a0`029e08b0 00000000`00000000 00000000`00000000 : nt!MmUnmapViewInSystemCache+0xca
fffff880`03156a10 fffff800`02ce6447 : 00000000`00000000 fffffa80`018b1300 00000000`00000000 00000000`00100000 : nt!CcUnmapVacb+0x5d
fffff880`03156a50 fffff800`02cbd174 : 00000000`00000001 fffffa80`055f7640 fffffa80`0541d300 00000000`00000000 : nt!CcUnmapVacbArray+0x1b7
fffff880`03156ae0 fffff800`02cc0c1c : fffffa80`0541d340 fffff880`041946ff fffffa80`0541d340 fffffa80`018e9600 : nt!CcDeleteSharedCacheMap+0x140
fffff880`03156b50 fffff800`02cc141c : fffff880`041abd00 fffff880`03156c58 00000000`00000000 fffff880`00000000 : nt!CcWriteBehind+0x5bc
fffff880`03156c00 fffff800`02cda861 : fffffa80`018ec4f0 fffff800`02cc1254 fffff800`02ed4140 fffffa80`00000003 : nt!CcWorkerThread+0x1c8
fffff880`03156cb0 fffff800`02f72a86 : 00000000`00000000 fffffa80`018e9680 00000000`00000080 fffffa80`018ca040 : nt!ExpWorkerThread+0x111
fffff880`03156d40 fffff800`02cabb06 : fffff880`02f64180 fffffa80`018e9680 fffff880`02f6efc0 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`03156d80 00000000`00000000 : fffff880`03157000 fffff880`03151000 fffff880`03155c60 00000000`00000000 : nt!KxStartSystemThread+0x16


SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  nt!MmUnmapViewInSystemCache+ca

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP:  4b88cfeb

STACK_COMMAND:  .cxr 0xfffff88003155d60 ; kb

IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0x34_nt!MmUnmapViewInSystemCache+ca

BUCKET_ID:  X64_0x34_nt!MmUnmapViewInSystemCache+ca

Followup: MachineOwner
---------
I'll try the other ram memory... report it later!!!

Thanks one more time for the support!!!

No problem thats why we are here.

Ken
My System SpecsSystem Spec
Reply

 NEW PC HARDWARE BSODS - minidumps in




Thread Tools




Similar help and support threads
Thread Forum
BSODs (No Minidumps, Driver Verifier freezes OS on boot)
So I've been getting BSODs lately. I would get the occasional one, but lately I've been able to have them happen without fail when trying to both host and play on a Minecraft server. I did 2 passes with Windows' 'Diagnose your computer's memory problems' tool and it found no error, so I assume...
BSOD Help and Support
Random BSODs, New Computer Build, minidumps included
This is my first computer build, completed in September. Desktop has been used infrequently but will need to be used daily here soon. This computer is primarily going to be used for flash animation and video editing. There has been no pattern when receiving a BSOD. From what I can recall,...
BSOD Help and Support
BSODs - finding a reason (+minidumps)
Hello, I keep having BSODs for quite a long time. Basicly since I have this computer (5 months). Usually it happens during rendering, playing a game or if computer is running for a long time. I tried to find out the reason for myself, but I don't understand it too much and usually it says a...
BSOD Help and Support
Help me with Win 7 64-bit endless BSODs - minidumps
So many! Can't take it anymore! I installed win 7 64 bit few weeks ago and I had allot of Random BSOD since! 50 Minidumps included: Salvege me from the situation! Thank you so much.
BSOD Help and Support
Memory Management BSODs + Minidumps
Hi, For the past month I've been having an absolute nightmare in regards to Bluescreens on a new build. Originally I thought that a faulty stick of ram (Failed Memtest) was the problem but even after replacing the stick I'm still plagued with BSODs whenever the computer attempts anything to...
BSOD Help and Support
I'm back, more new, sudden BSODs three minidumps
Hello you 7 gurus. I'm back with some new minidump files. Any help you ppl can give me would be greatly appreciated. BTW, no commonality to give you on these other than the computer was at rest(not in use). It was not sleeping or in hibernation, just resting. Wish I could give you more help. I...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:50.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App