Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: bsod on start up, please help!

24 Apr 2010   #1

windows 7 32bit
bsod on start up, please help!

just had pc built 4 me, and most of the time when i start up i get bsod and then after a while is tells me 2 reboot 2 earlier stage, i have dun memstic test and that was ok and also sfc /scannow all ok..please can any 1 help

problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.
Locale ID: 2057

Additional information about the problem:
BCCode: 1000007f
BCP1: 00000008
BCP2: 807CA750
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:

also attaching dumpfile

My System SpecsSystem Spec
24 Apr 2010   #2
Carl Lawrence

Dual-boot: Windows 7 HP 32-bit SP1 & Windows XP Pro 32-bit SP2.

Have you done a memtest to check your RAM?
My System SpecsSystem Spec
24 Apr 2010   #3

windows 7 32bit
bsodon start up

Quote   Quote: Originally Posted by Love Windows 7 View Post
Have you done a memtest to check your RAM?
yes bud dun mem test every think sound , have u any ideas ?? i 4 got 2 state that bsod dont happen on every start up.
My System SpecsSystem Spec

26 Apr 2010   #4

windows 7 32bit

any 1 / please help ,its driving me mad
My System SpecsSystem Spec
26 Apr 2010   #5

Windows 7 Ultimate x64 Service Pack 1 (Build 6.1.7601)

This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault).  The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
        use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
        use .trap on that value
        .trap on the appropriate frame will show where the trap was taken
        (on x86, this will be the ebp that goes with the procedure KiTrap)
kb will then show the corrected stack.
Arg2: 8d503750
Arg3: 00000000
Arg4: 00000000

Debugging Details:




PROCESS_NAME:  csrss.exe


LAST_CONTROL_TRANSFER:  from 8316cb53 to 830db481

8f1490cc 8316cb53 983c4000 8573c140 00000000 nt!MiFreePagedPoolPages+0xd0
8f1491b0 8316ea43 983c4000 00001000 829299b8 nt!MiFreePoolPages+0x455
8f1491f8 8316d8aa 8573c140 00000000 8292b000 nt!ExDeferredFreePool+0x3e2
8f149264 83215429 829299c0 e24e4d43 832153fc nt!ExFreePoolWithTag+0x8a4
8f149270 832153fc a7a91489 983d3280 983d3268 nt!CmpQueryKeyName+0x2a8
8f1492b0 832cb382 829299c8 00000000 8292b000 nt!CmpQueryKeyName+0x280
8f149334 832cbaba 983d3280 8292b000 00001000 nt!ObpQueryNameString+0x7f
8f149350 9065cca2 983d3280 8292b000 00001000 nt!ObQueryNameString+0x18
WARNING: Stack unwind information not available. Following frames may be wrong.
8f1493a0 9064b1dd 983d3280 8f1493c8 1f721002 klif+0x2dca2
8f1493e4 9064c18a 1f721792 983c1258 8f149514 klif+0x1c1dd
8f149474 832ec448 00000000 0000001d 8f149514 klif+0x1d18a
8f1494e8 8328cab1 0000001d 983c1258 8c25cef0 nt!CmpCallCallBacks+0x336
8f149530 83285a4e 0000001d 983d3280 8f1495e8 nt!CmPostCallbackNotification+0x55
8f1496c0 8326f21f 8c20aa18 857ce550 87920d20 nt!CmpParseKey+0x14b2
8f14973c 8329528d 00000000 8f149790 00000240 nt!ObpLookupObjectName+0x4fa
8f149798 8328c9e4 8f149958 857ce550 857ce500 nt!ObOpenObjectByName+0x159
8f149878 8329075c 8f149bb8 82000000 8f149958 nt!CmOpenKey+0x1f4
8f149898 8309144a 8f149bb8 82000000 8f149958 nt!NtOpenKey+0x18
8f149898 8308f7fd 8f149bb8 82000000 8f149958 nt!KiFastCallEntry+0x12a
8f14991c 832469b9 8f149bb8 82000000 8f149958 nt!ZwOpenKey+0x11
8f149b88 83245de6 00000000 8f149bb8 8f149ffc nt!RtlpGetRegistryHandle+0x134
8f149bf4 9184a0ee 80000000 8f149c9c 8f149c1c nt!RtlQueryRegistryValues+0x23
8f149c54 9184c96f 8f149c9c 8f149f1c 8f14a184 atikmdag+0x280ee
8f149ea0 91842369 8f14a184 8f149ecc 8f149ffc atikmdag+0x2a96f
8f149fd0 9187b934 86ff0000 8f149fe8 91afdfe8 atikmdag+0x20369
8f149fd4 86ff0000 8f149fe8 91afdfe8 983d32c0 atikmdag+0x59934
8f149fd8 8f149fe8 91afdfe8 983d32c0 00000040 0x86ff0000
8f149fdc 91afdfe8 983d32c0 00000040 00010006 0x8f149fe8
8f149fe8 00010006 8f14a05c 8f14a184 00000000 atikmdag+0x2dbfe8
8f149fec 8f14a05c 8f14a184 00000000 00000004 0x10006
8f149ff0 8f14a184 00000000 00000004 00000000 0x8f14a05c
8f149ff4 00000000 00000004 00000000 00000000 0x8f14a184


9065cca2 ??              ???


SYMBOL_NAME:  klif+2dca2

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  klif.sys


FAILURE_BUCKET_ID:  0x7f_8_klif+2dca2

BUCKET_ID:  0x7f_8_klif+2dca2

Followup: MachineOwner
You need to so into safe mode and uninstall your ATI driver and control center and also delete your anti virus and reinstall it.

BTW: Welcome to the forums.
My System SpecsSystem Spec
26 Apr 2010   #6

win7 ultimate / virtual box

Quote   Quote: Originally Posted by lasty28 View Post
any 1 / please help ,its driving me mad
sorry "crispy" was editing while you posted , but here's my take on the crash :)

debugger came up with
* *
* Bugcheck Analysis *
* *

Use !analyze -v to get detailed debugging information.

BugCheck 1000007F, {8, 8d503750, 0, 0}

*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : klif.sys ( klif+2dca2 )

Followup: MachineOwner
0x7F is Low-level hardware corruption, such as corrupt memory (RAM), Mismatched memory modules, A malfunctioning motherboard ?

although debugger suggests this is ram or motherboard I personally think your issue here is with Kaspersky as klif.sys is mentioned as being unable to load the symbol ?

completely unninstall Kaspersky and replace with MSE for debugging purposes then monitor for crashes

N.B. you need to update these old drivers
pcouffin.sys 0x91fbb000 0x91fc6900 0x0000b900 0x457584b9 05/12/2006 15:39:53
nvm62x32.sys 0x90589000 0x905ddc80 0x00054c80 0x48f8fcf7 17/10/2008 22:00:39
pcouffin.sys is Patin-Couffin VSO Software and is related to CD/DVD burning software ?
nvm62x64.sys - nVidia nForce network driver ?

let us know how it goes
My System SpecsSystem Spec
26 Apr 2010   #7

windows 7 32bit

thanks alot guys i will give that ago and let u know how i got on..
My System SpecsSystem Spec

 bsod on start up, please help!

Thread Tools

Similar help and support threads
Thread Forum
BSOD pc restart few times before start, sometimes won't start
Hello everyone, lately i have problem with starting my pc. Always is like this, i checked everything CPU,RAM,HDD all is all right.. I uploaded zip
BSOD Help and Support
Laptop won't start after update, can't start start up repair either
My mother in law has a toshiba satellite p775-s7100 and this morning she told me there was a toshiba update, I was on her laptop yesterday and saw there was an update for her bios, so I'm assuming she clicked the update button and messed the update up somehow. Now when we try to boot the laptop,...
General Discussion
BSOD At start up - W7ULT - Memory BSOD related
These errors and problems have occured since I first got my computer. I just assumed that it was a problem that always happened and when I was on W7 x64 Home Premium I just ended up never getting a BSOD after a while but my computer would always restart on shut down. Now I'm on Windows 7...
BSOD Help and Support
BSOD on Start up, White bars and pixelation in start up screen.
Hello, my machine is 2 yrs old and recently I have encountered this problem. It started slowly. While playing League of Legends and Starcraft 2 it would occasionally freeze up, the display would become pixelated and I would have to restart my PC. I could still hear audio, but nothing would...
BSOD Help and Support
BSOD on Start - able to start in Safe Mode and Restore
Windows 7 Home Premium 64-bit on Dell XPS 8100 with Intel Core i5, 650@3.20 GHz, 8Gb RAM, worked flawlessly out of the box in April (for five months). For a few weeks, powering off had produced "Installing Windows Updates, 1 (etc) of 8" - each and every time. Two days ago, power on results in...
Backup and Restore

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:44.
Twitter Facebook Google+