Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win7 Pro 64bit

04 May 2010   #11
win7clutz

Windows 7 Ultimate (64)
 
 

Under the circumstances, I'd flash to any newer firmware.

Are you Overclocked? If so set bios defaults until you find the solution.


My System SpecsSystem Spec
.
04 May 2010   #12
Brodix

Windows 7 Professional 64bit
 
 

No OC, BIOS is default other than shutdown temp in case of overheating
I will try the beta bios
My System SpecsSystem Spec
04 May 2010   #13
win7clutz

Windows 7 Ultimate (64)
 
 

Good luck with it... Time to crash in Ohio but post back with your results.
My System SpecsSystem Spec
.

04 May 2010   #14
Brodix

Windows 7 Professional 64bit
 
 

Ok it now has the F3D Beta BIOS

Thanks for the help.......... will report back probably tomorrow night
My System SpecsSystem Spec
04 May 2010   #15
Brodix

Windows 7 Professional 64bit
 
 

It BSOD within minutes of startup today

new minidmps attached and screenshots of temps@idle and again with P95s large FFTs (for max heat and power consumption)
My System SpecsSystem Spec
05 May 2010   #16
Brodix

Windows 7 Professional 64bit
 
 

any other ideas? did the new minidmps show anything different than the ones in my first post?
My System SpecsSystem Spec
06 May 2010   #17
Brodix

Windows 7 Professional 64bit
 
 

I found that the DRAM voltage was set by default below manufacturers recommended voltage of 1.55 to 1.75v............... it was set to 1.50 and is now set to 1.56

However I am still getting BSODs, two new ones are attached.
My System SpecsSystem Spec
06 May 2010   #18
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Brodix View Post
I found that the DRAM voltage was set by default below manufacturers recommended voltage of 1.55 to 1.75v............... it was set to 1.50 and is now set to 1.56

However I am still getting BSODs, two new ones are attached.

These too were caused by pool_corruption (memory). If you havent run memtestx86 for at least 5 passes you should


Ken
My System SpecsSystem Spec
06 May 2010   #19
Brodix

Windows 7 Professional 64bit
 
 

yes i ran memtest a few days ago.... shut it down when it was working on 7th pass with no errors


I'll try moving the memory to the other pair of slots


Thanks for the help, will report back later tonight
My System SpecsSystem Spec
07 May 2010   #20
Brodix

Windows 7 Professional 64bit
 
 

Another new minidmp , i was using IE 64 bit this time thinking maybe firefox could be the problem

Is this one also a memory problem??
My System SpecsSystem Spec
Reply

 Win7 Pro 64bit




Thread Tools




Similar help and support threads
Thread Forum
how transfer data from win7 64bit to win xp 64bit?
how transfer data from win7 64bit to win xp 64bit? I searched on google but not found anything, no software. I also tried WET 7xp-64bit but not working.
Network & Sharing
BSOD Winxp 64bit, Win7 Pro 64bit many error codes
Hi every one, i have this machine which is causing too much headache for me, this machine was having Windows XP 64 Bit, and it had a lot of BSOD crashes, then i just decided that it's the time to make the move to Windows 7 for this high performance machine, since i was not able to upgrade to...
BSOD Help and Support
Win7 32bit Home Premium to Win7 64bit Ultimate: Possible without Clean
I just bought a ThinkPad T400, and 8GB DDR3 upgrade kit. After first log on, I realized the Windows 7 is 32bit. How can I upgrade to Ultimate x64 instead? Thanks for your help.
Installation & Setup
Cannot read hdd from old desktop Win7 32bit on new laptop Win7 64bit
I have a new Toshiba Laptop (Win7 64bit CORE i3). I would like to run (via usb) and old hdd from my desktop which was 32bit Win7. I have the old hard drive in a SATA enclosure and running it via USB to my laptop. When I attempt to either copy or read the old hard drive I get a write protect error....
Hardware & Devices
Reinstall Win7 32bit to Win7 64bit /backup disc content
Hey, I purchased the Win 7 Pro Upgrade 32bit via digitalriver, but I've been doing some reseach and probably should have selected the 64bit version. - Any ideas how I can get the 64bit version? - For those who ordered the 32bit back-up disc kit for the extra $15 and have received it,...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:59.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App